{"title":"PMO Floats \u0026 Fuel System","description":"\u003cp\u003eFuel delivery, done right. Floats, needle-and-seat, unions, banjo fittings and adjustable pressure control — steady, clean fuel from the tank to the bowl.\u003c\/p\u003e","products":[{"product_id":"pmo-float-level-gauge-porsche-911-1965-1989","title":"PMO Float Level Gauge — Carburetor Fuel Level Setting Tool | PMO Carbs, Porsche 911 (PM-O405-0)","description":"\u003cp\u003eFloat level is the setting everyone guesses at and nobody should. Get it wrong and you get a rich bog off idle, fuel slopping out under cornering, or a lean stumble you'll blame on jetting for a month. The \u003cstrong\u003ePMO Float Level Gauge (PM-O405-0)\u003c\/strong\u003e lets you set the fuel height in the bowl to an actual measurement, on the bench or on the car.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasures actual float level\u003c\/strong\u003e instead of relying on a bent-tab estimate.\u003c\/li\u003e\n\u003cli\u003eMakes the setting repeatable across all six bowls, so the carburetors match each other.\u003c\/li\u003e\n\u003cli\u003eMade in the USA by PMO.\u003c\/li\u003e\n\u003cli\u003eA buy-once shop tool — it will outlast several rebuilds.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eConfirmed:\u003c\/strong\u003e Setting float levels on PMO carburetors fitted to air-cooled Porsche 911 and 930 engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e a shop tool rather than a vehicle-specific part. Related consumables: PMO float gauge gasket PM-O405-3 and copper shims PM-O405-4.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart number: PM-O405-0\u003c\/li\u003e\n\u003cli\u003eType: Carburetor float level setting gauge\u003c\/li\u003e\n\u003cli\u003eUPC: 707924555653\u003c\/li\u003e\n\u003cli\u003eCountry of origin: United States\u003c\/li\u003e\n\u003cli\u003eShipping weight: 0.11 lb\u003c\/li\u003e\n\u003cli\u003eBoxed dimensions: 4.5 x 4 x 0.625 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQuestions \u0026amp; Answers\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat does a float level gauge do?\u003c\/strong\u003e It lets you measure and set the fuel height in the carburetor bowl accurately, rather than estimating from the float tab.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes it work on all PMO carbs?\u003c\/strong\u003e It is designed for PMO carburetors on air-cooled Porsche engines.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's the part number?\u003c\/strong\u003e PM-O405-0.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAre you an authorized dealer?\u003c\/strong\u003e Yes — Washburn's Metal is an authorized PMO dealer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow does it ship?\u003c\/strong\u003e Standard ground or air; no hazmat restrictions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e⚠️ WARNING:\u003c\/strong\u003e This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"PMO","offers":[{"title":"Default Title","offer_id":45259279827059,"sku":"PM-O405-0","price":94.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/PM-O405-0-2-scaled.jpg?v=1784322078"},{"product_id":"pmo-fuel-pressure-control-unit-barbed-fittings-porsche-911-1965-1989","title":"PMO Fuel Pressure Control Unit — Adjustable, Barbed Fittings | Carbureted Porsche 911 \/ 930 (PM-O403-0)","description":"\u003cp\u003eCarburetors want low, steady fuel pressure — feed them straight off a modern pump and you push fuel past the float valves, flood the bowls, and chase a rich condition that no amount of jetting will cure. The \u003cstrong\u003ePMO Fuel Pressure Control Unit with barbed fittings (PM-O403-0)\u003c\/strong\u003e sets the pressure where your carburetors actually want it and holds it there.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable regulation\u003c\/strong\u003e — dial the pressure to suit your carburetors rather than living with whatever the pump delivers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBarbed fittings\u003c\/strong\u003e for standard rubber fuel hose — the straightforward choice on a stock-style fuel line.\u003c\/li\u003e\n\u003cli\u003eProtects float valves and stops pressure-induced flooding and bowl overflow.\u003c\/li\u003e\n\u003cli\u003eMade in the USA by PMO.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eConfirmed:\u003c\/strong\u003e Carbureted air-cooled Porsche 911 and 930 fuel systems running PMO or Weber carburetors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoose your fitting style:\u003c\/strong\u003e this is the barbed-hose version. If you are plumbing braided line with AN fittings, order PM-O404-0 instead.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart number: PM-O403-0\u003c\/li\u003e\n\u003cli\u003eFitting type: Barbed (rubber hose)\u003c\/li\u003e\n\u003cli\u003eUPC: 707924555585\u003c\/li\u003e\n\u003cli\u003eCountry of origin: United States\u003c\/li\u003e\n\u003cli\u003eShipping weight: 0.43 lb\u003c\/li\u003e\n\u003cli\u003eBoxed dimensions: 6 x 6 x 3 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQuestions \u0026amp; Answers\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhy do I need a regulator on a carbureted car?\u003c\/strong\u003e Carburetors need low, stable pressure; too much pressure forces fuel past the float valve and floods the bowls.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBarbed or AN?\u003c\/strong\u003e This is the barbed version for rubber hose. PM-O404-0 is the AN-6 version for braided line.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's the part number?\u003c\/strong\u003e PM-O403-0.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAre you an authorized dealer?\u003c\/strong\u003e Yes — Washburn's Metal is an authorized PMO dealer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow does it ship?\u003c\/strong\u003e Standard ground or air; no hazmat restrictions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e⚠️ WARNING:\u003c\/strong\u003e This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"PMO","offers":[{"title":"Default Title","offer_id":45259279892595,"sku":"PM-O403-0","price":135.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/PM-O403-0-1-scaled.jpg?v=1784322082"},{"product_id":"pmo-fuel-pressure-control-unit-an-6-fittings-porsche-911-1965-1989","title":"PMO Fuel Pressure Control Unit — Adjustable, AN-6 Fittings | Carbureted Porsche 911 \/ 930 (PM-O404-0)","description":"\u003cp\u003eSame job, cleaner plumbing. The \u003cstrong\u003ePMO Fuel Pressure Control Unit with AN-6 fittings (PM-O404-0)\u003c\/strong\u003e holds carburetor fuel pressure where it belongs, and does it on -6 AN connections so it drops straight into a braided-line fuel system without adapters or barb-and-clamp compromises.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable regulation\u003c\/strong\u003e — set the pressure your carburetors want and keep it there.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAN-6 fittings\u003c\/strong\u003e — direct fit for braided stainless fuel line, no adapters needed.\u003c\/li\u003e\n\u003cli\u003ePrevents high pump pressure from forcing fuel past the float valves and flooding the bowls.\u003c\/li\u003e\n\u003cli\u003eMade in the USA by PMO.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eConfirmed:\u003c\/strong\u003e Carbureted air-cooled Porsche 911 and 930 fuel systems running PMO or Weber carburetors, plumbed with -6 AN line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoose your fitting style:\u003c\/strong\u003e this is the AN-6 version. Running standard rubber hose? Order PM-O403-0 with barbed fittings.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart number: PM-O404-0\u003c\/li\u003e\n\u003cli\u003eFitting type: AN-6\u003c\/li\u003e\n\u003cli\u003eUPC: 707924555592\u003c\/li\u003e\n\u003cli\u003eCountry of origin: United States\u003c\/li\u003e\n\u003cli\u003eShipping weight: 1 lb\u003c\/li\u003e\n\u003cli\u003eBoxed dimensions: 6.75 x 6.75 x 2.25 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQuestions \u0026amp; Answers\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWill this connect to braided line?\u003c\/strong\u003e Yes — it uses -6 AN fittings, so braided stainless line connects directly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat if I'm running rubber hose?\u003c\/strong\u003e Order PM-O403-0, the barbed-fitting version.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's the part number?\u003c\/strong\u003e PM-O404-0.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAre you an authorized dealer?\u003c\/strong\u003e Yes — Washburn's Metal is an authorized PMO dealer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow does it ship?\u003c\/strong\u003e Standard ground or air; no hazmat restrictions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e⚠️ WARNING:\u003c\/strong\u003e This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"PMO","offers":[{"title":"Default Title","offer_id":45259279925363,"sku":"PM-O404-0","price":135.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/PM-O404-0-1-scaled.jpg?v=1784322086"},{"product_id":"pmo-an-fuel-inlet-fitting-porsche-911-1965-1989","title":"PMO AN Fuel Inlet Fitting — Carburetor Banjo Connection | PMO Carbs, Porsche 911 (PM-O117-0)","description":"\u003cp\u003eThe small brass part that decides whether your fuel system leaks. The \u003cstrong\u003ePMO AN Fuel Inlet Fitting (PM-O117-0)\u003c\/strong\u003e is the correct inlet for the banjo connection on PMO carburetors — the right thread, the right seat, and no improvised hardware-store substitute weeping fuel over a hot engine.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAN-style inlet\u003c\/strong\u003e made specifically for the PMO carburetor fuel banjo connection.\u003c\/li\u003e\n\u003cli\u003eCorrect thread and sealing face — seats properly instead of being cranked down to stop a leak.\u003c\/li\u003e\n\u003cli\u003eSold individually, so you can replace one or do the whole set.\u003c\/li\u003e\n\u003cli\u003eInexpensive insurance on the one system you do not want leaking.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eConfirmed:\u003c\/strong\u003e PMO carburetor fuel inlet \/ banjo connections on air-cooled Porsche 911 and 930 engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e sold as a single fitting. A six-carburetor engine may need more than one — check what your installation requires before ordering.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart number: PM-O117-0\u003c\/li\u003e\n\u003cli\u003eType: AN-style fuel inlet fitting\u003c\/li\u003e\n\u003cli\u003eSold as: each\u003c\/li\u003e\n\u003cli\u003eUPC: 707924552928\u003c\/li\u003e\n\u003cli\u003eCountry of origin: China\u003c\/li\u003e\n\u003cli\u003eShipping weight: 0.1 lb (minimum packed weight)\u003c\/li\u003e\n\u003cli\u003eBoxed dimensions: 4 x 4 x 1 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQuestions \u0026amp; Answers\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIs this sold as a set?\u003c\/strong\u003e No — it is sold individually. Order the quantity your installation needs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat does it connect to?\u003c\/strong\u003e The fuel banjo \/ inlet connection on PMO carburetors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's the part number?\u003c\/strong\u003e PM-O117-0.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAre you an authorized dealer?\u003c\/strong\u003e Yes — Washburn's Metal is an authorized PMO dealer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow does it ship?\u003c\/strong\u003e Standard ground or air; no hazmat restrictions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e⚠️ WARNING:\u003c\/strong\u003e This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"PMO","offers":[{"title":"Default Title","offer_id":45259279990899,"sku":"PM-O117-0","price":7.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/PM-O117-0-2-scaled.jpg?v=1784322091"},{"product_id":"pmo-fuel-bar-air-cooled-porsche-911-pm-o406-0","title":"PMO Fuel Bar — Genuine PMO | Porsche 911 (1965-1989) (PM-O406-0)","description":"\u003cp\u003eThe Fuel Bar is a genuine PMO (Performance Machined Originals) component for the air-cooled Porsche 911 — the same precision parts trusted on show engines and race motors. Part number PM-O406-0. Made in USA.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGenuine PMO \/ Performance Machined Originals manufacture\u003c\/li\u003e\n\u003cli\u003eEngineered for PMO and Weber carbureted air-cooled Porsche 911 induction\u003c\/li\u003e\n\u003cli\u003eGenuine PMO\u003c\/li\u003e\n\u003cli\u003eSold and shipped by an authorized PMO dealer\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Fits air-cooled Porsche 911 (1965–1989) running PMO or Weber carburetion. Confirmed: Porsche 911. If you are unsure of your carburetor size or setup, contact us with your engine build before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: PM-O406-0\u003c\/li\u003e\n\u003cli\u003eManufacturer: PMO (Performance Machined Originals)\u003c\/li\u003e\n\u003cli\u003eBoxed dimensions: 8 x 7 x 1 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 0.289 lb\u003c\/li\u003e\n\u003cli\u003eOrigin: Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQuestions \u0026amp; Answers\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes this fit my Porsche?\u003c\/strong\u003e Fits air-cooled Porsche 911 (1965–1989) running PMO or Weber carburetion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the part number?\u003c\/strong\u003e This is PMO PM-O406-0.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre you an authorized dealer?\u003c\/strong\u003e Yes — Washburn's Metal is an authorized PMO dealer, so this is a genuine PMO part, not a copy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does it ship?\u003c\/strong\u003e Standard ground from our Orange, California shop; no hazmat restrictions on this item.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuick spec:\u003c\/strong\u003e Genuine PMO Fuel Bar (PM-O406-0), Genuine PMO, for air-cooled Porsche 911 carbureted induction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 Warning:\u003c\/strong\u003e This product can expose you to chemicals including lead, known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\/\",\"@type\":\"Product\",\"name\":\"PMO Fuel Bar (PM-O406-0)\",\"sku\":\"PM-O406-0\",\"mpn\":\"PM-O406-0\",\"brand\":{\"@type\":\"Brand\",\"name\":\"PMO\"},\"description\":\"Genuine PMO Fuel Bar for air-cooled Porsche 911.\",\"offers\":{\"@type\":\"Offer\",\"priceCurrency\":\"USD\",\"price\":\"136.98\",\"availability\":\"https:\/\/schema.org\/InStock\",\"seller\":{\"@type\":\"Organization\",\"name\":\"Washburn's Metal\"}},\"gtin12\":\"707924555868\"}\u003c\/script\u003e","brand":"PMO","offers":[{"title":"Default Title","offer_id":45274697957491,"sku":"PM-O406-0","price":136.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/PM-O406-0-1-scaled.jpg?v=1784765535"},{"product_id":"pmo-float-needle-body-pmo-carburetors-1-75-air-cooled-porsche-911-pm-o105-0","title":"PMO Float Needle Body, PMO Carburetors, 1.75 — Genuine PMO | Porsche 911 (1965-1989) (PM-O105-0)","description":"\u003cp\u003eThe Float Needle Body, PMO Carburetors, 1.75 is a genuine PMO (Performance Machined Originals) component for the air-cooled Porsche 911 — the same precision parts trusted on show engines and race motors. Part number PM-O105-0. Made in USA.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGenuine PMO \/ Performance Machined Originals manufacture\u003c\/li\u003e\n\u003cli\u003eEngineered for PMO and Weber carbureted air-cooled Porsche 911 induction\u003c\/li\u003e\n\u003cli\u003eGenuine PMO\u003c\/li\u003e\n\u003cli\u003eSold and shipped by an authorized PMO dealer\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Fits air-cooled Porsche 911 (1965–1989) running PMO or Weber carburetion. Confirmed: Porsche 911. If you are unsure of your carburetor size or setup, contact us with your engine build before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: PM-O105-0\u003c\/li\u003e\n\u003cli\u003eManufacturer: PMO (Performance Machined Originals)\u003c\/li\u003e\n\u003cli\u003eBoxed dimensions: 4 x 4 x 1 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 0.1 lb\u003c\/li\u003e\n\u003cli\u003eOrigin: Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQuestions \u0026amp; Answers\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes this fit my Porsche?\u003c\/strong\u003e Fits air-cooled Porsche 911 (1965–1989) running PMO or Weber carburetion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the part number?\u003c\/strong\u003e This is PMO PM-O105-0.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre you an authorized dealer?\u003c\/strong\u003e Yes — Washburn's Metal is an authorized PMO dealer, so this is a genuine PMO part, not a copy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does it ship?\u003c\/strong\u003e Standard ground from our Orange, California shop; no hazmat restrictions on this item.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuick spec:\u003c\/strong\u003e Genuine PMO Float Needle Body, PMO Carburetors, 1.75 (PM-O105-0), Genuine PMO, for air-cooled Porsche 911 carbureted induction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 Warning:\u003c\/strong\u003e This product can expose you to chemicals including lead, known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\/\",\"@type\":\"Product\",\"name\":\"PMO Float Needle Body, PMO Carburetors, 1.75 (PM-O105-0)\",\"sku\":\"PM-O105-0\",\"mpn\":\"PM-O105-0\",\"brand\":{\"@type\":\"Brand\",\"name\":\"PMO\"},\"description\":\"Genuine PMO Float Needle Body, PMO Carburetors, 1.75 for air-cooled Porsche 911.\",\"offers\":{\"@type\":\"Offer\",\"priceCurrency\":\"USD\",\"price\":\"11.06\",\"availability\":\"https:\/\/schema.org\/InStock\",\"seller\":{\"@type\":\"Organization\",\"name\":\"Washburn's Metal\"}},\"gtin12\":\"707924553307\"}\u003c\/script\u003e","brand":"PMO","offers":[{"title":"Default Title","offer_id":45274732920947,"sku":"PM-O105-0","price":11.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/PM-O105-0-scaled.jpg?v=1784765892"},{"product_id":"pmo-delivery-valve-assembly-air-cooled-porsche-911-pm-o171-4","title":"PMO Delivery Valve Assembly — Genuine PMO | Porsche 911 (1965-1989) (PM-O171-4)","description":"\u003cp\u003eThe Delivery Valve Assembly is a genuine PMO (Performance Machined Originals) component for the air-cooled Porsche 911 — the same precision parts trusted on show engines and race motors. Part number PM-O171-4. Imported.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGenuine PMO \/ Performance Machined Originals manufacture\u003c\/li\u003e\n\u003cli\u003eEngineered for PMO and Weber carbureted air-cooled Porsche 911 induction\u003c\/li\u003e\n\u003cli\u003eGenuine PMO\u003c\/li\u003e\n\u003cli\u003eSold and shipped by an authorized PMO dealer\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Fits air-cooled Porsche 911 (1965–1989) running PMO or Weber carburetion. Confirmed: Porsche 911. If you are unsure of your carburetor size or setup, contact us with your engine build before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: PM-O171-4\u003c\/li\u003e\n\u003cli\u003eManufacturer: PMO (Performance Machined Originals)\u003c\/li\u003e\n\u003cli\u003eBoxed dimensions: 4 x 4 x 1 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 0.1 lb\u003c\/li\u003e\n\u003cli\u003eOrigin: Imported\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQuestions \u0026amp; Answers\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes this fit my Porsche?\u003c\/strong\u003e Fits air-cooled Porsche 911 (1965–1989) running PMO or Weber carburetion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the part number?\u003c\/strong\u003e This is PMO PM-O171-4.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre you an authorized dealer?\u003c\/strong\u003e Yes — Washburn's Metal is an authorized PMO dealer, so this is a genuine PMO part, not a copy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does it ship?\u003c\/strong\u003e Standard ground from our Orange, California shop; no hazmat restrictions on this item.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuick spec:\u003c\/strong\u003e Genuine PMO Delivery Valve Assembly (PM-O171-4), Genuine PMO, for air-cooled Porsche 911 carbureted induction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 Warning:\u003c\/strong\u003e This product can expose you to chemicals including lead, known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\/\",\"@type\":\"Product\",\"name\":\"PMO Delivery Valve Assembly (PM-O171-4)\",\"sku\":\"PM-O171-4\",\"mpn\":\"PM-O171-4\",\"brand\":{\"@type\":\"Brand\",\"name\":\"PMO\"},\"description\":\"Genuine PMO Delivery Valve Assembly for air-cooled Porsche 911.\",\"offers\":{\"@type\":\"Offer\",\"priceCurrency\":\"USD\",\"price\":\"27.57\",\"availability\":\"https:\/\/schema.org\/InStock\",\"seller\":{\"@type\":\"Organization\",\"name\":\"Washburn's Metal\"}},\"gtin12\":\"707924553567\"}\u003c\/script\u003e","brand":"PMO","offers":[{"title":"Default Title","offer_id":45274735738995,"sku":"PM-O171-4","price":27.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/PM-O171-4-scaled.jpg?v=1784766086"},{"product_id":"pmo-float-pin-hair-pin-cotter-air-cooled-porsche-911-pm-o118-1","title":"PMO Float Pin Hair Pin Cotter — Genuine PMO | Porsche 911 (1965-1989) (PM-O118-1)","description":"\u003cp\u003eThe Float Pin Hair Pin Cotter is a genuine PMO (Performance Machined Originals) component for the air-cooled Porsche 911 — the same precision parts trusted on show engines and race motors. Part number PM-O118-1. Made in USA.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGenuine PMO \/ Performance Machined Originals manufacture\u003c\/li\u003e\n\u003cli\u003eEngineered for PMO and Weber carbureted air-cooled Porsche 911 induction\u003c\/li\u003e\n\u003cli\u003eGenuine PMO\u003c\/li\u003e\n\u003cli\u003eSold and shipped by an authorized PMO dealer\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Fits air-cooled Porsche 911 (1965–1989) running PMO or Weber carburetion. Confirmed: Porsche 911. If you are unsure of your carburetor size or setup, contact us with your engine build before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: PM-O118-1\u003c\/li\u003e\n\u003cli\u003eManufacturer: PMO (Performance Machined Originals)\u003c\/li\u003e\n\u003cli\u003eBoxed dimensions: 4 x 4 x 1 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 0.1 lb\u003c\/li\u003e\n\u003cli\u003eOrigin: Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQuestions \u0026amp; Answers\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes this fit my Porsche?\u003c\/strong\u003e Fits air-cooled Porsche 911 (1965–1989) running PMO or Weber carburetion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the part number?\u003c\/strong\u003e This is PMO PM-O118-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre you an authorized dealer?\u003c\/strong\u003e Yes — Washburn's Metal is an authorized PMO dealer, so this is a genuine PMO part, not a copy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does it ship?\u003c\/strong\u003e Standard ground from our Orange, California shop; no hazmat restrictions on this item.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuick spec:\u003c\/strong\u003e Genuine PMO Float Pin Hair Pin Cotter (PM-O118-1), Genuine PMO, for air-cooled Porsche 911 carbureted induction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 Warning:\u003c\/strong\u003e This product can expose you to chemicals including lead, known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\/\",\"@type\":\"Product\",\"name\":\"PMO Float Pin Hair Pin Cotter (PM-O118-1)\",\"sku\":\"PM-O118-1\",\"mpn\":\"PM-O118-1\",\"brand\":{\"@type\":\"Brand\",\"name\":\"PMO\"},\"description\":\"Genuine PMO Float Pin Hair Pin Cotter for air-cooled Porsche 911.\",\"offers\":{\"@type\":\"Offer\",\"priceCurrency\":\"USD\",\"price\":\"4.99\",\"availability\":\"https:\/\/schema.org\/InStock\",\"seller\":{\"@type\":\"Organization\",\"name\":\"Washburn's Metal\"}},\"gtin12\":\"707924552133\"}\u003c\/script\u003e","brand":"PMO","offers":[{"title":"Default Title","offer_id":45274736656499,"sku":"PM-O118-1","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/PM-O118-1-scaled.jpg?v=1784766154"},{"product_id":"pmo-window-nut-air-cooled-porsche-911-pm-o112-0","title":"PMO Window Nut — Genuine PMO | Porsche 911 (1965-1989) (PM-O112-0)","description":"\u003cp\u003eThe Window Nut is a genuine PMO (Performance Machined Originals) component for the air-cooled Porsche 911 — the same precision parts trusted on show engines and race motors. Part number PM-O112-0. Imported.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGenuine PMO \/ Performance Machined Originals manufacture\u003c\/li\u003e\n\u003cli\u003eEngineered for PMO and Weber carbureted air-cooled Porsche 911 induction\u003c\/li\u003e\n\u003cli\u003eGenuine PMO\u003c\/li\u003e\n\u003cli\u003eSold and shipped by an authorized PMO dealer\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Fits air-cooled Porsche 911 (1965–1989) running PMO or Weber carburetion. Confirmed: Porsche 911. If you are unsure of your carburetor size or setup, contact us with your engine build before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: PM-O112-0\u003c\/li\u003e\n\u003cli\u003eManufacturer: PMO (Performance Machined Originals)\u003c\/li\u003e\n\u003cli\u003eBoxed dimensions: 4 x 4 x 1 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 0.1 lb\u003c\/li\u003e\n\u003cli\u003eOrigin: Imported\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQuestions \u0026amp; Answers\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes this fit my Porsche?\u003c\/strong\u003e Fits air-cooled Porsche 911 (1965–1989) running PMO or Weber carburetion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the part number?\u003c\/strong\u003e This is PMO PM-O112-0.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre you an authorized dealer?\u003c\/strong\u003e Yes — Washburn's Metal is an authorized PMO dealer, so this is a genuine PMO part, not a copy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does it ship?\u003c\/strong\u003e Standard ground from our Orange, California shop; no hazmat restrictions on this item.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuick spec:\u003c\/strong\u003e Genuine PMO Window Nut (PM-O112-0), Genuine PMO, for air-cooled Porsche 911 carbureted induction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 Warning:\u003c\/strong\u003e This product can expose you to chemicals including lead, known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\/\",\"@type\":\"Product\",\"name\":\"PMO Window Nut (PM-O112-0)\",\"sku\":\"PM-O112-0\",\"mpn\":\"PM-O112-0\",\"brand\":{\"@type\":\"Brand\",\"name\":\"PMO\"},\"description\":\"Genuine PMO Window Nut for air-cooled Porsche 911.\",\"offers\":{\"@type\":\"Offer\",\"priceCurrency\":\"USD\",\"price\":\"8.91\",\"availability\":\"https:\/\/schema.org\/InStock\",\"seller\":{\"@type\":\"Organization\",\"name\":\"Washburn's Metal\"}},\"gtin12\":\"707924552867\"}\u003c\/script\u003e","brand":"PMO","offers":[{"title":"Default Title","offer_id":45274736853107,"sku":"PM-O112-0","price":8.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/PM-O112-0-scaled.jpg?v=1784766155"},{"product_id":"pmo-float-gauge-brass-air-cooled-porsche-911-pm-o405-1","title":"PMO Float Gauge Brass — Genuine PMO | Porsche 911 (1965-1989) (PM-O405-1)","description":"\u003cp\u003eThe Float Gauge Brass is a genuine PMO (Performance Machined Originals) component for the air-cooled Porsche 911 — the same precision parts trusted on show engines and race motors. Part number PM-O405-1. Imported.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGenuine PMO \/ Performance Machined Originals manufacture\u003c\/li\u003e\n\u003cli\u003eEngineered for PMO and Weber carbureted air-cooled Porsche 911 induction\u003c\/li\u003e\n\u003cli\u003eGenuine PMO\u003c\/li\u003e\n\u003cli\u003eSold and shipped by an authorized PMO dealer\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Fits air-cooled Porsche 911 (1965–1989) running PMO or Weber carburetion. Confirmed: Porsche 911. If you are unsure of your carburetor size or setup, contact us with your engine build before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: PM-O405-1\u003c\/li\u003e\n\u003cli\u003eManufacturer: PMO (Performance Machined Originals)\u003c\/li\u003e\n\u003cli\u003eBoxed dimensions: 4 x 4 x 1 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 0.1 lb\u003c\/li\u003e\n\u003cli\u003eOrigin: Imported\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQuestions \u0026amp; Answers\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes this fit my Porsche?\u003c\/strong\u003e Fits air-cooled Porsche 911 (1965–1989) running PMO or Weber carburetion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the part number?\u003c\/strong\u003e This is PMO PM-O405-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre you an authorized dealer?\u003c\/strong\u003e Yes — Washburn's Metal is an authorized PMO dealer, so this is a genuine PMO part, not a copy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does it ship?\u003c\/strong\u003e Standard ground from our Orange, California shop; no hazmat restrictions on this item.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuick spec:\u003c\/strong\u003e Genuine PMO Float Gauge Brass (PM-O405-1), Genuine PMO, for air-cooled Porsche 911 carbureted induction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 Warning:\u003c\/strong\u003e This product can expose you to chemicals including lead, known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\/\",\"@type\":\"Product\",\"name\":\"PMO Float Gauge Brass (PM-O405-1)\",\"sku\":\"PM-O405-1\",\"mpn\":\"PM-O405-1\",\"brand\":{\"@type\":\"Brand\",\"name\":\"PMO\"},\"description\":\"Genuine PMO Float Gauge Brass for air-cooled Porsche 911.\",\"offers\":{\"@type\":\"Offer\",\"priceCurrency\":\"USD\",\"price\":\"25.90\",\"availability\":\"https:\/\/schema.org\/InStock\",\"seller\":{\"@type\":\"Organization\",\"name\":\"Washburn's Metal\"}},\"gtin12\":\"707924555660\"}\u003c\/script\u003e","brand":"PMO","offers":[{"title":"Default Title","offer_id":45274742489203,"sku":"PM-O405-1","price":25.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/PM-O405-1-scaled.jpg?v=1784766218"},{"product_id":"pmo-fuel-line-union-banjo-bolt-air-cooled-porsche-911-pm-o194-0","title":"PMO Fuel Line Union Banjo Bolt — Genuine PMO | Porsche 911 (1965-1989) (PM-O194-0)","description":"\u003cp\u003eThe Fuel Line Union Banjo Bolt is a genuine PMO (Performance Machined Originals) component for the air-cooled Porsche 911 — the same precision parts trusted on show engines and race motors. Part number PM-O194-0. Imported.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGenuine PMO \/ Performance Machined Originals manufacture\u003c\/li\u003e\n\u003cli\u003eEngineered for PMO and Weber carbureted air-cooled Porsche 911 induction\u003c\/li\u003e\n\u003cli\u003eGenuine PMO\u003c\/li\u003e\n\u003cli\u003eSold and shipped by an authorized PMO dealer\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Fits air-cooled Porsche 911 (1965–1989) running PMO or Weber carburetion. Confirmed: Porsche 911. If you are unsure of your carburetor size or setup, contact us with your engine build before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: PM-O194-0\u003c\/li\u003e\n\u003cli\u003eManufacturer: PMO (Performance Machined Originals)\u003c\/li\u003e\n\u003cli\u003eBoxed dimensions: 4 x 3 x 0.1 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 0.07 lb\u003c\/li\u003e\n\u003cli\u003eOrigin: Imported\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQuestions \u0026amp; Answers\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes this fit my Porsche?\u003c\/strong\u003e Fits air-cooled Porsche 911 (1965–1989) running PMO or Weber carburetion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the part number?\u003c\/strong\u003e This is PMO PM-O194-0.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre you an authorized dealer?\u003c\/strong\u003e Yes — Washburn's Metal is an authorized PMO dealer, so this is a genuine PMO part, not a copy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does it ship?\u003c\/strong\u003e Standard ground from our Orange, California shop; no hazmat restrictions on this item.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuick spec:\u003c\/strong\u003e Genuine PMO Fuel Line Union Banjo Bolt (PM-O194-0), Genuine PMO, for air-cooled Porsche 911 carbureted induction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 Warning:\u003c\/strong\u003e This product can expose you to chemicals including lead, known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\/\",\"@type\":\"Product\",\"name\":\"PMO Fuel Line Union Banjo Bolt (PM-O194-0)\",\"sku\":\"PM-O194-0\",\"mpn\":\"PM-O194-0\",\"brand\":{\"@type\":\"Brand\",\"name\":\"PMO\"},\"description\":\"Genuine PMO Fuel Line Union Banjo Bolt for air-cooled Porsche 911.\",\"offers\":{\"@type\":\"Offer\",\"priceCurrency\":\"USD\",\"price\":\"11.97\",\"availability\":\"https:\/\/schema.org\/InStock\",\"seller\":{\"@type\":\"Organization\",\"name\":\"Washburn's Metal\"}},\"gtin12\":\"707924560732\"}\u003c\/script\u003e","brand":"PMO","offers":[{"title":"Default Title","offer_id":45274742620275,"sku":"PM-O194-0","price":11.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/PM-O194-0-scaled.jpg?v=1784766219"},{"product_id":"pmo-fuel-line-union-dual-air-cooled-porsche-911-pm-o193-0","title":"PMO Fuel Line Union, Dual — Genuine PMO | Porsche 911 (1965-1989) (PM-O193-0)","description":"\u003cp\u003eThe Fuel Line Union, Dual is a genuine PMO (Performance Machined Originals) component for the air-cooled Porsche 911 — the same precision parts trusted on show engines and race motors. Part number PM-O193-0. Imported.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGenuine PMO \/ Performance Machined Originals manufacture\u003c\/li\u003e\n\u003cli\u003eEngineered for PMO and Weber carbureted air-cooled Porsche 911 induction\u003c\/li\u003e\n\u003cli\u003eGenuine PMO\u003c\/li\u003e\n\u003cli\u003eSold and shipped by an authorized PMO dealer\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Fits air-cooled Porsche 911 (1965–1989) running PMO or Weber carburetion. Confirmed: Porsche 911. If you are unsure of your carburetor size or setup, contact us with your engine build before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: PM-O193-0\u003c\/li\u003e\n\u003cli\u003eManufacturer: PMO (Performance Machined Originals)\u003c\/li\u003e\n\u003cli\u003eBoxed dimensions: 6 x 4 x 0.75 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 0.09 lb\u003c\/li\u003e\n\u003cli\u003eOrigin: Imported\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQuestions \u0026amp; Answers\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes this fit my Porsche?\u003c\/strong\u003e Fits air-cooled Porsche 911 (1965–1989) running PMO or Weber carburetion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the part number?\u003c\/strong\u003e This is PMO PM-O193-0.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre you an authorized dealer?\u003c\/strong\u003e Yes — Washburn's Metal is an authorized PMO dealer, so this is a genuine PMO part, not a copy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does it ship?\u003c\/strong\u003e Standard ground from our Orange, California shop; no hazmat restrictions on this item.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuick spec:\u003c\/strong\u003e Genuine PMO Fuel Line Union, Dual (PM-O193-0), Genuine PMO, for air-cooled Porsche 911 carbureted induction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 Warning:\u003c\/strong\u003e This product can expose you to chemicals including lead, known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\/\",\"@type\":\"Product\",\"name\":\"PMO Fuel Line Union, Dual (PM-O193-0)\",\"sku\":\"PM-O193-0\",\"mpn\":\"PM-O193-0\",\"brand\":{\"@type\":\"Brand\",\"name\":\"PMO\"},\"description\":\"Genuine PMO Fuel Line Union, Dual for air-cooled Porsche 911.\",\"offers\":{\"@type\":\"Offer\",\"priceCurrency\":\"USD\",\"price\":\"24.25\",\"availability\":\"https:\/\/schema.org\/InStock\",\"seller\":{\"@type\":\"Organization\",\"name\":\"Washburn's Metal\"}},\"gtin12\":\"707924560725\"}\u003c\/script\u003e","brand":"PMO","offers":[{"title":"Default Title","offer_id":45274742653043,"sku":"PM-O193-0","price":24.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/PM-O193-0-scaled.jpg?v=1784766220"},{"product_id":"pmo-weber-float-shim-kit-air-cooled-porsche-911-pm-o404-9","title":"PMO Weber Float Shim Kit — Genuine PMO | Porsche 911 (1965-1989) (PM-O404-9)","description":"\u003cp\u003eThe Weber Float Shim Kit is a genuine PMO (Performance Machined Originals) component for the air-cooled Porsche 911 — the same precision parts trusted on show engines and race motors. Part number PM-O404-9. Made in USA.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGenuine PMO \/ Performance Machined Originals manufacture\u003c\/li\u003e\n\u003cli\u003eEngineered for PMO and Weber carbureted air-cooled Porsche 911 induction\u003c\/li\u003e\n\u003cli\u003eGenuine PMO\u003c\/li\u003e\n\u003cli\u003eSold and shipped by an authorized PMO dealer\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Fits air-cooled Porsche 911 (1965–1989) running PMO or Weber carburetion. Confirmed: Porsche 911. If you are unsure of your carburetor size or setup, contact us with your engine build before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: PM-O404-9\u003c\/li\u003e\n\u003cli\u003eManufacturer: PMO (Performance Machined Originals)\u003c\/li\u003e\n\u003cli\u003eBoxed dimensions: 0.125 x 0.125 x 0.125 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 0.01 lb\u003c\/li\u003e\n\u003cli\u003eOrigin: Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQuestions \u0026amp; Answers\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes this fit my Porsche?\u003c\/strong\u003e Fits air-cooled Porsche 911 (1965–1989) running PMO or Weber carburetion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the part number?\u003c\/strong\u003e This is PMO PM-O404-9.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre you an authorized dealer?\u003c\/strong\u003e Yes — Washburn's Metal is an authorized PMO dealer, so this is a genuine PMO part, not a copy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does it ship?\u003c\/strong\u003e Standard ground from our Orange, California shop; no hazmat restrictions on this item.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuick spec:\u003c\/strong\u003e Genuine PMO Weber Float Shim Kit (PM-O404-9), Genuine PMO, for air-cooled Porsche 911 carbureted induction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 Warning:\u003c\/strong\u003e This product can expose you to chemicals including lead, known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\/\",\"@type\":\"Product\",\"name\":\"PMO Weber Float Shim Kit (PM-O404-9)\",\"sku\":\"PM-O404-9\",\"mpn\":\"PM-O404-9\",\"brand\":{\"@type\":\"Brand\",\"name\":\"PMO\"},\"description\":\"Genuine PMO Weber Float Shim Kit for air-cooled Porsche 911.\",\"offers\":{\"@type\":\"Offer\",\"priceCurrency\":\"USD\",\"price\":\"42.70\",\"availability\":\"https:\/\/schema.org\/InStock\",\"seller\":{\"@type\":\"Organization\",\"name\":\"Washburn's Metal\"}},\"gtin12\":\"707924557671\"}\u003c\/script\u003e","brand":"PMO","offers":[{"title":"Default Title","offer_id":45274792657011,"sku":"PM-O404-9","price":42.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/PM-O404-9-scaled.jpg?v=1784766347"},{"product_id":"pmo-float-shim-kit-air-cooled-porsche-911-pm-o105-9","title":"PMO Float Shim Kit — Genuine PMO | Porsche 911 (1965-1989) (PM-O105-9)","description":"\u003cp\u003eThe Float Shim Kit is a genuine PMO (Performance Machined Originals) component for the air-cooled Porsche 911 — the same precision parts trusted on show engines and race motors. Part number PM-O105-9. Made in USA.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGenuine PMO \/ Performance Machined Originals manufacture\u003c\/li\u003e\n\u003cli\u003eEngineered for PMO and Weber carbureted air-cooled Porsche 911 induction\u003c\/li\u003e\n\u003cli\u003eGenuine PMO\u003c\/li\u003e\n\u003cli\u003eSold and shipped by an authorized PMO dealer\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Fits air-cooled Porsche 911 (1965–1989) running PMO or Weber carburetion. Confirmed: Porsche 911. If you are unsure of your carburetor size or setup, contact us with your engine build before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: PM-O105-9\u003c\/li\u003e\n\u003cli\u003eManufacturer: PMO (Performance Machined Originals)\u003c\/li\u003e\n\u003cli\u003eBoxed dimensions: 4 x 2 x 1 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 0.01 lb\u003c\/li\u003e\n\u003cli\u003eOrigin: Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQuestions \u0026amp; Answers\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes this fit my Porsche?\u003c\/strong\u003e Fits air-cooled Porsche 911 (1965–1989) running PMO or Weber carburetion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the part number?\u003c\/strong\u003e This is PMO PM-O105-9.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre you an authorized dealer?\u003c\/strong\u003e Yes — Washburn's Metal is an authorized PMO dealer, so this is a genuine PMO part, not a copy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does it ship?\u003c\/strong\u003e Standard ground from our Orange, California shop; no hazmat restrictions on this item.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuick spec:\u003c\/strong\u003e Genuine PMO Float Shim Kit (PM-O105-9), Genuine PMO, for air-cooled Porsche 911 carbureted induction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 Warning:\u003c\/strong\u003e This product can expose you to chemicals including lead, known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\/\",\"@type\":\"Product\",\"name\":\"PMO Float Shim Kit (PM-O105-9)\",\"sku\":\"PM-O105-9\",\"mpn\":\"PM-O105-9\",\"brand\":{\"@type\":\"Brand\",\"name\":\"PMO\"},\"description\":\"Genuine PMO Float Shim Kit for air-cooled Porsche 911.\",\"offers\":{\"@type\":\"Offer\",\"priceCurrency\":\"USD\",\"price\":\"9.79\",\"availability\":\"https:\/\/schema.org\/InStock\",\"seller\":{\"@type\":\"Organization\",\"name\":\"Washburn's Metal\"}},\"gtin12\":\"707924557626\"}\u003c\/script\u003e","brand":"PMO","offers":[{"title":"Default Title","offer_id":45274792919155,"sku":"PM-O105-9","price":9.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/PM-O105-9-scaled.jpg?v=1784766409"},{"product_id":"pmo-window-glass-air-cooled-porsche-911-pm-o113-0","title":"PMO Window Glass — Genuine PMO | Porsche 911 (1965-1989) (PM-O113-0)","description":"\u003cp\u003eThe Window Glass is a genuine PMO (Performance Machined Originals) component for the air-cooled Porsche 911 — the same precision parts trusted on show engines and race motors. Part number PM-O113-0. Made in USA.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGenuine PMO \/ Performance Machined Originals manufacture\u003c\/li\u003e\n\u003cli\u003eEngineered for PMO and Weber carbureted air-cooled Porsche 911 induction\u003c\/li\u003e\n\u003cli\u003eGenuine PMO\u003c\/li\u003e\n\u003cli\u003eSold and shipped by an authorized PMO dealer\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Fits air-cooled Porsche 911 (1965–1989) running PMO or Weber carburetion. Confirmed: Porsche 911. If you are unsure of your carburetor size or setup, contact us with your engine build before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: PM-O113-0\u003c\/li\u003e\n\u003cli\u003eManufacturer: PMO (Performance Machined Originals)\u003c\/li\u003e\n\u003cli\u003eBoxed dimensions: 4 x 4 x 1 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 0.1 lb\u003c\/li\u003e\n\u003cli\u003eOrigin: Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQuestions \u0026amp; Answers\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes this fit my Porsche?\u003c\/strong\u003e Fits air-cooled Porsche 911 (1965–1989) running PMO or Weber carburetion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the part number?\u003c\/strong\u003e This is PMO PM-O113-0.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre you an authorized dealer?\u003c\/strong\u003e Yes — Washburn's Metal is an authorized PMO dealer, so this is a genuine PMO part, not a copy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does it ship?\u003c\/strong\u003e Standard ground from our Orange, California shop; no hazmat restrictions on this item.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuick spec:\u003c\/strong\u003e Genuine PMO Window Glass (PM-O113-0), Genuine PMO, for air-cooled Porsche 911 carbureted induction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 Warning:\u003c\/strong\u003e This product can expose you to chemicals including lead, known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\/\",\"@type\":\"Product\",\"name\":\"PMO Window Glass (PM-O113-0)\",\"sku\":\"PM-O113-0\",\"mpn\":\"PM-O113-0\",\"brand\":{\"@type\":\"Brand\",\"name\":\"PMO\"},\"description\":\"Genuine PMO Window Glass for air-cooled Porsche 911.\",\"offers\":{\"@type\":\"Offer\",\"priceCurrency\":\"USD\",\"price\":\"8.91\",\"availability\":\"https:\/\/schema.org\/InStock\",\"seller\":{\"@type\":\"Organization\",\"name\":\"Washburn's Metal\"}},\"gtin12\":\"707924551884\"}\u003c\/script\u003e","brand":"PMO","offers":[{"title":"Default Title","offer_id":45274794721395,"sku":"PM-O113-0","price":8.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/PM-O113-0-2-scaled.jpg?v=1784766543"},{"product_id":"pmo-fuel-inlet-barbed-air-cooled-porsche-911-pm-o109-0","title":"PMO Fuel Inlet Barbed — Genuine PMO | Porsche 911 (1965-1989) (PM-O109-0)","description":"\u003cp\u003eThe Fuel Inlet Barbed is a genuine PMO (Performance Machined Originals) component for the air-cooled Porsche 911 — the same precision parts trusted on show engines and race motors. Part number PM-O109-0. Imported.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGenuine PMO \/ Performance Machined Originals manufacture\u003c\/li\u003e\n\u003cli\u003eEngineered for PMO and Weber carbureted air-cooled Porsche 911 induction\u003c\/li\u003e\n\u003cli\u003eGenuine PMO\u003c\/li\u003e\n\u003cli\u003eSold and shipped by an authorized PMO dealer\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Fits air-cooled Porsche 911 (1965–1989) running PMO or Weber carburetion. Confirmed: Porsche 911. If you are unsure of your carburetor size or setup, contact us with your engine build before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: PM-O109-0\u003c\/li\u003e\n\u003cli\u003eManufacturer: PMO (Performance Machined Originals)\u003c\/li\u003e\n\u003cli\u003eBoxed dimensions: 3.25 x 2 x 0.625 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 0.04 lb\u003c\/li\u003e\n\u003cli\u003eOrigin: Imported\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQuestions \u0026amp; Answers\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes this fit my Porsche?\u003c\/strong\u003e Fits air-cooled Porsche 911 (1965–1989) running PMO or Weber carburetion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the part number?\u003c\/strong\u003e This is PMO PM-O109-0.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre you an authorized dealer?\u003c\/strong\u003e Yes — Washburn's Metal is an authorized PMO dealer, so this is a genuine PMO part, not a copy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does it ship?\u003c\/strong\u003e Standard ground from our Orange, California shop; no hazmat restrictions on this item.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuick spec:\u003c\/strong\u003e Genuine PMO Fuel Inlet Barbed (PM-O109-0), Genuine PMO, for air-cooled Porsche 911 carbureted induction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 Warning:\u003c\/strong\u003e This product can expose you to chemicals including lead, known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\/\",\"@type\":\"Product\",\"name\":\"PMO Fuel Inlet Barbed (PM-O109-0)\",\"sku\":\"PM-O109-0\",\"mpn\":\"PM-O109-0\",\"brand\":{\"@type\":\"Brand\",\"name\":\"PMO\"},\"description\":\"Genuine PMO Fuel Inlet Barbed for air-cooled Porsche 911.\",\"offers\":{\"@type\":\"Offer\",\"priceCurrency\":\"USD\",\"price\":\"12.02\",\"availability\":\"https:\/\/schema.org\/InStock\",\"seller\":{\"@type\":\"Organization\",\"name\":\"Washburn's Metal\"}},\"gtin12\":\"707924553079\"}\u003c\/script\u003e","brand":"PMO","offers":[{"title":"Default Title","offer_id":45274794754163,"sku":"PM-O109-0","price":12.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/PM-O109-0-2-scaled.jpg?v=1784766544"},{"product_id":"pmo-float-gauge-copper-shim-010-air-cooled-porsche-911-pm-o405-4","title":"PMO Float Gauge Copper Shim .010 — Genuine PMO | Porsche 911 (1965-1989) (PM-O405-4)","description":"\u003cp\u003eThe Float Gauge Copper Shim .010 is a genuine PMO (Performance Machined Originals) component for the air-cooled Porsche 911 — the same precision parts trusted on show engines and race motors. Part number PM-O405-4. Made in USA.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGenuine PMO \/ Performance Machined Originals manufacture\u003c\/li\u003e\n\u003cli\u003eEngineered for PMO and Weber carbureted air-cooled Porsche 911 induction\u003c\/li\u003e\n\u003cli\u003eGenuine PMO\u003c\/li\u003e\n\u003cli\u003eSold and shipped by an authorized PMO dealer\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Fits air-cooled Porsche 911 (1965–1989) running PMO or Weber carburetion. Confirmed: Porsche 911. If you are unsure of your carburetor size or setup, contact us with your engine build before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: PM-O405-4\u003c\/li\u003e\n\u003cli\u003eManufacturer: PMO (Performance Machined Originals)\u003c\/li\u003e\n\u003cli\u003eBoxed dimensions: 4 x 4 x 1 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 0.1 lb\u003c\/li\u003e\n\u003cli\u003eOrigin: Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQuestions \u0026amp; Answers\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes this fit my Porsche?\u003c\/strong\u003e Fits air-cooled Porsche 911 (1965–1989) running PMO or Weber carburetion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the part number?\u003c\/strong\u003e This is PMO PM-O405-4.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre you an authorized dealer?\u003c\/strong\u003e Yes — Washburn's Metal is an authorized PMO dealer, so this is a genuine PMO part, not a copy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does it ship?\u003c\/strong\u003e Standard ground from our Orange, California shop; no hazmat restrictions on this item.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuick spec:\u003c\/strong\u003e Genuine PMO Float Gauge Copper Shim .010 (PM-O405-4), Genuine PMO, for air-cooled Porsche 911 carbureted induction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 Warning:\u003c\/strong\u003e This product can expose you to chemicals including lead, known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\/\",\"@type\":\"Product\",\"name\":\"PMO Float Gauge Copper Shim .010 (PM-O405-4)\",\"sku\":\"PM-O405-4\",\"mpn\":\"PM-O405-4\",\"brand\":{\"@type\":\"Brand\",\"name\":\"PMO\"},\"description\":\"Genuine PMO Float Gauge Copper Shim .010 for air-cooled Porsche 911.\",\"offers\":{\"@type\":\"Offer\",\"priceCurrency\":\"USD\",\"price\":\"6.36\",\"availability\":\"https:\/\/schema.org\/InStock\",\"seller\":{\"@type\":\"Organization\",\"name\":\"Washburn's Metal\"}},\"gtin12\":\"707924555752\"}\u003c\/script\u003e","brand":"PMO","offers":[{"title":"Default Title","offer_id":45274795343987,"sku":"PM-O405-4","price":6.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/PM-O405-4-1-scaled.jpg?v=1784766608"},{"product_id":"pmo-float-gauge-plastic-air-cooled-porsche-911-pm-o405-2","title":"PMO Float Gauge Plastic — Genuine PMO | Porsche 911 (1965-1989) (PM-O405-2)","description":"\u003cp\u003eThe Float Gauge Plastic is a genuine PMO (Performance Machined Originals) component for the air-cooled Porsche 911 — the same precision parts trusted on show engines and race motors. Part number PM-O405-2. Made in USA.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGenuine PMO \/ Performance Machined Originals manufacture\u003c\/li\u003e\n\u003cli\u003eEngineered for PMO and Weber carbureted air-cooled Porsche 911 induction\u003c\/li\u003e\n\u003cli\u003eGenuine PMO\u003c\/li\u003e\n\u003cli\u003eSold and shipped by an authorized PMO dealer\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Fits air-cooled Porsche 911 (1965–1989) running PMO or Weber carburetion. Confirmed: Porsche 911. If you are unsure of your carburetor size or setup, contact us with your engine build before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: PM-O405-2\u003c\/li\u003e\n\u003cli\u003eManufacturer: PMO (Performance Machined Originals)\u003c\/li\u003e\n\u003cli\u003eBoxed dimensions: 4 x 4 x 1 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 0.1 lb\u003c\/li\u003e\n\u003cli\u003eOrigin: Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQuestions \u0026amp; Answers\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes this fit my Porsche?\u003c\/strong\u003e Fits air-cooled Porsche 911 (1965–1989) running PMO or Weber carburetion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the part number?\u003c\/strong\u003e This is PMO PM-O405-2.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre you an authorized dealer?\u003c\/strong\u003e Yes — Washburn's Metal is an authorized PMO dealer, so this is a genuine PMO part, not a copy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does it ship?\u003c\/strong\u003e Standard ground from our Orange, California shop; no hazmat restrictions on this item.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuick spec:\u003c\/strong\u003e Genuine PMO Float Gauge Plastic (PM-O405-2), Genuine PMO, for air-cooled Porsche 911 carbureted induction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 Warning:\u003c\/strong\u003e This product can expose you to chemicals including lead, known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\/\",\"@type\":\"Product\",\"name\":\"PMO Float Gauge Plastic (PM-O405-2)\",\"sku\":\"PM-O405-2\",\"mpn\":\"PM-O405-2\",\"brand\":{\"@type\":\"Brand\",\"name\":\"PMO\"},\"description\":\"Genuine PMO Float Gauge Plastic for air-cooled Porsche 911.\",\"offers\":{\"@type\":\"Offer\",\"priceCurrency\":\"USD\",\"price\":\"38.88\",\"availability\":\"https:\/\/schema.org\/InStock\",\"seller\":{\"@type\":\"Organization\",\"name\":\"Washburn's Metal\"}},\"gtin12\":\"707924555677\"}\u003c\/script\u003e","brand":"PMO","offers":[{"title":"Default Title","offer_id":45274795376755,"sku":"PM-O405-2","price":38.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/PM-O405-2-1-scaled.jpg?v=1784766608"},{"product_id":"pmo-brass-float-for-weber-48-ida-and-40-46-3bbl-ida-air-cooled-porsche-911-pm-o165-0","title":"PMO Brass Float for Weber 48 IDA and 40 46 3BBL IDA — Genuine PMO | Porsche 911 (1965-1989) (PM-O165-0)","description":"\u003cp\u003eThe Brass Float for Weber 48 IDA and 40 46 3BBL IDA is a genuine PMO (Performance Machined Originals) component for the air-cooled Porsche 911 — the same precision parts trusted on show engines and race motors. Part number PM-O165-0. Imported.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGenuine PMO \/ Performance Machined Originals manufacture\u003c\/li\u003e\n\u003cli\u003eEngineered for PMO and Weber carbureted air-cooled Porsche 911 induction\u003c\/li\u003e\n\u003cli\u003eGenuine PMO\u003c\/li\u003e\n\u003cli\u003eSold and shipped by an authorized PMO dealer\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Fits air-cooled Porsche 911 (1965–1989) running PMO or Weber carburetion. Confirmed: Porsche 911. If you are unsure of your carburetor size or setup, contact us with your engine build before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: PM-O165-0\u003c\/li\u003e\n\u003cli\u003eManufacturer: PMO (Performance Machined Originals)\u003c\/li\u003e\n\u003cli\u003eBoxed dimensions: 6 x 4 x 2 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 0.026 lb\u003c\/li\u003e\n\u003cli\u003eOrigin: Imported\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQuestions \u0026amp; Answers\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes this fit my Porsche?\u003c\/strong\u003e Fits air-cooled Porsche 911 (1965–1989) running PMO or Weber carburetion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the part number?\u003c\/strong\u003e This is PMO PM-O165-0.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre you an authorized dealer?\u003c\/strong\u003e Yes — Washburn's Metal is an authorized PMO dealer, so this is a genuine PMO part, not a copy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does it ship?\u003c\/strong\u003e Standard ground from our Orange, California shop; no hazmat restrictions on this item.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuick spec:\u003c\/strong\u003e Genuine PMO Brass Float for Weber 48 IDA and 40 46 3BBL IDA (PM-O165-0), Genuine PMO, for air-cooled Porsche 911 carbureted induction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 Warning:\u003c\/strong\u003e This product can expose you to chemicals including lead, known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\/\",\"@type\":\"Product\",\"name\":\"PMO Brass Float for Weber 48 IDA and 40 46 3BBL IDA (PM-O165-0)\",\"sku\":\"PM-O165-0\",\"mpn\":\"PM-O165-0\",\"brand\":{\"@type\":\"Brand\",\"name\":\"PMO\"},\"description\":\"Genuine PMO Brass Float for Weber 48 IDA and 40 46 3BBL IDA for air-cooled Porsche 911.\",\"offers\":{\"@type\":\"Offer\",\"priceCurrency\":\"USD\",\"price\":\"44.49\",\"availability\":\"https:\/\/schema.org\/InStock\",\"seller\":{\"@type\":\"Organization\",\"name\":\"Washburn's Metal\"}},\"gtin12\":\"707924553017\"}\u003c\/script\u003e","brand":"PMO","offers":[{"title":"Default Title","offer_id":45274799112307,"sku":"PM-O165-0","price":44.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/PM-O165-0-scaled.jpg?v=1784766738"},{"product_id":"pmo-fuel-line-union-single-air-cooled-porsche-911-pm-o195-0","title":"PMO Fuel Line Union, Single — Genuine PMO | Porsche 911 (1965-1989) (PM-O195-0)","description":"\u003cp\u003eThe Fuel Line Union, Single is a genuine PMO (Performance Machined Originals) component for the air-cooled Porsche 911 — the same precision parts trusted on show engines and race motors. Part number PM-O195-0. Imported.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGenuine PMO \/ Performance Machined Originals manufacture\u003c\/li\u003e\n\u003cli\u003eEngineered for PMO and Weber carbureted air-cooled Porsche 911 induction\u003c\/li\u003e\n\u003cli\u003eGenuine PMO\u003c\/li\u003e\n\u003cli\u003eSold and shipped by an authorized PMO dealer\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Fits air-cooled Porsche 911 (1965–1989) running PMO or Weber carburetion. Confirmed: Porsche 911. If you are unsure of your carburetor size or setup, contact us with your engine build before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: PM-O195-0\u003c\/li\u003e\n\u003cli\u003eManufacturer: PMO (Performance Machined Originals)\u003c\/li\u003e\n\u003cli\u003eBoxed dimensions: 4 x 3 x 0.12 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 0.07 lb\u003c\/li\u003e\n\u003cli\u003eOrigin: Imported\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQuestions \u0026amp; Answers\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes this fit my Porsche?\u003c\/strong\u003e Fits air-cooled Porsche 911 (1965–1989) running PMO or Weber carburetion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the part number?\u003c\/strong\u003e This is PMO PM-O195-0.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre you an authorized dealer?\u003c\/strong\u003e Yes — Washburn's Metal is an authorized PMO dealer, so this is a genuine PMO part, not a copy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does it ship?\u003c\/strong\u003e Standard ground from our Orange, California shop; no hazmat restrictions on this item.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuick spec:\u003c\/strong\u003e Genuine PMO Fuel Line Union, Single (PM-O195-0), Genuine PMO, for air-cooled Porsche 911 carbureted induction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 Warning:\u003c\/strong\u003e This product can expose you to chemicals including lead, known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\/\",\"@type\":\"Product\",\"name\":\"PMO Fuel Line Union, Single (PM-O195-0)\",\"sku\":\"PM-O195-0\",\"mpn\":\"PM-O195-0\",\"brand\":{\"@type\":\"Brand\",\"name\":\"PMO\"},\"description\":\"Genuine PMO Fuel Line Union, Single for air-cooled Porsche 911.\",\"offers\":{\"@type\":\"Offer\",\"priceCurrency\":\"USD\",\"price\":\"31.77\",\"availability\":\"https:\/\/schema.org\/InStock\",\"seller\":{\"@type\":\"Organization\",\"name\":\"Washburn's Metal\"}},\"gtin12\":\"707924560749\"}\u003c\/script\u003e","brand":"PMO","offers":[{"title":"Default Title","offer_id":45274799145075,"sku":"PM-O195-0","price":31.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/PM-O195-0-scaled.jpg?v=1784766738"}],"url":"https:\/\/www.washburnsmetal.com\/collections\/pmo-floats-fuel.oembed","provider":"Washburn's Metal","version":"1.0","type":"link"}