{"title":"Porsche 911 \/ 912 Body Panels","description":"\u003cdiv style=\"background:rgba(12,12,12,0.88);border-left:3px solid #c9a55c;padding:20px 24px;margin-top:20px;border-radius:0 4px 4px 0\"\u003e\n\u003cp\u003eSheet metal body and chassis repair panels for the Porsche 911 and 912 (shared body shell). Weld-on and bolt-on restoration panels including floor pans, quarter panels, rockers, A-pillars, doors, front and rear panels, aprons, roof, and repair sections.\u003c\/p\u003e\n\u003ch2 style=\"color:#ffffff;font-family:Inter,sans-serif;text-transform:none\"\u003eWhich years these 911 and 912 panels actually fit\u003c\/h2\u003e\n\u003cp\u003eNearly everything in this collection is catalogued 1965-1973 for the 911 and 1965-1969 for the 912. That is not an approximation, it is the fitment recorded against each panel, and it is the window in which the two cars share structure. A few pieces sit outside it: some front inner-fender splash panels and wheelhouse repair sections also list 930 1975-1989, and a wheel-housing skin or two is 911 F-model only.\u003c\/p\u003e\n\u003ch3 style=\"color:#ffffff;font-family:Inter,sans-serif;text-transform:none\"\u003eCheck before you cut\u003c\/h3\u003e\n\u003cul style=\"margin:0 0 14px;padding-left:20px;list-style:disc\"\u003e\n\u003cli style=\"list-style:disc;margin:0 0 6px\"\u003e\n\u003cstrong\u003eFull panel or repair section?\u003c\/strong\u003e Both exist here - full rocker panels and partial rockers, full rear quarters and partial quarters, complete floor pan halves and front floor sections. Buy the smallest piece that reaches good metal.\u003c\/li\u003e\n\u003cli style=\"list-style:disc;margin:0 0 6px\"\u003e\n\u003cstrong\u003eLeft and right are separate part numbers.\u003c\/strong\u003e Doors, quarters, hinge pillars, hinge reinforcements, fender floors and A-pillars are all handed.\u003c\/li\u003e\n\u003cli style=\"list-style:disc;margin:0 0 6px\"\u003e\n\u003cstrong\u003eAluminum or steel.\u003c\/strong\u003e Front hoods are listed both ways. Know which one the car left with and which one your build wants.\u003c\/li\u003e\n\u003cli style=\"list-style:disc;margin:0 0 6px\"\u003e\n\u003cstrong\u003eConfirm the year from the number.\u003c\/strong\u003e The \u003ca href=\"\/pages\/porsche-911-chassis-decoder\"\u003e911 chassis decoder\u003c\/a\u003e and the \u003ca href=\"\/pages\/porsche-912-chassis-decoder\"\u003e912 chassis decoder\u003c\/a\u003e both read early cars straight off the chassis stamping.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"color:#ffffff;font-family:Inter,sans-serif;text-transform:none\"\u003eWeld-in parts need a shop, not just a shopping cart\u003c\/h3\u003e\n\u003cp\u003eA repair panel is stamped to fit an undamaged car. Yours is not undamaged, which is why it needs the panel. We cut, form, fit and weld in-house in Orange, California, including making sections nobody reproduces. If a quarter or a floor will not line up, we would rather tell you what the car is actually doing than sell you a second one.\u003c\/p\u003e\n\u003cp\u003eRelated: \u003ca href=\"\/collections\/porsche-911\"\u003eall 911 and 912 parts\u003c\/a\u003e, \u003ca href=\"\/collections\/porsche-356-body-panels\"\u003e356 body panels\u003c\/a\u003e, \u003ca href=\"\/pages\/metal-work\"\u003emetal work\u003c\/a\u003e, \u003ca href=\"\/pages\/chassis-work\"\u003echassis work\u003c\/a\u003e. Parts line \u003ca href=\"tel:+16574387002\"\u003e(657) 438-7002\u003c\/a\u003e, Monday to Friday 8am-5pm Pacific.\u003c\/p\u003e\n\u003c\/div\u003e","products":[{"product_id":"chassis-floor-porsche-911-912-jp-1971-0","title":"Chassis Floor — Porsche 911 \/ 912 (JP-1971-0)","description":"\u003cp\u003eFull chassis floor section for Porsche 911 \/ 912, manufactured by JP Group. This weld-in steel restoration panel replaces a badly rusted floor pan with a complete one-piece section, restoring the car's structural foundation.\u003c\/p\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePorsche 911 \/ 912, classic long-hood chassis (1965–1973) — confirm your exact chassis before ordering\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStamped steel to the original floor profile for a correct weld-in fit\u003c\/li\u003e\n\u003cli\u003eFull-floor coverage simplifies repair versus patching multiple small sections\u003c\/li\u003e\n\u003cli\u003eCross-references OE Porsche part 1683100700\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eJP Group Part #: JP-1971-0\u003c\/li\u003e\n\u003cli\u003eAlternate\/OE cross-reference: 1683100700\u003c\/li\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eInstallation: Weld-in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eQ: Does this replace both floor pan halves?\u003c\/strong\u003e\u003cbr\u003eA: Yes, this is a full one-piece chassis floor; individual left\/right halves are also sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: Is welding required?\u003c\/strong\u003e\u003cbr\u003eA: Yes, this is a structural weld-in panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProp 65 Warning:\u003c\/strong\u003e This product can expose you to chemicals including lead, known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.p65warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"JP GROUP","offers":[{"title":"Default Title","offer_id":45064379498611,"sku":"JP-1971-0","price":549.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/1683100700-scaled.jpg?v=1780467822"},{"product_id":"floor-pan-half-left-porsche-911-912-jp-1967-0","title":"Floor Pan Half, Left — Porsche 911 \/ 912 (JP-1967-0)","description":"\u003cp\u003eLeft floor pan half for Porsche 911 \/ 912, manufactured by JP Group. This weld-in steel restoration panel replaces the driver-side floor section without requiring full-floor replacement.\u003c\/p\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePorsche 911 \/ 912, classic long-hood chassis (1965–1973) — confirm your exact chassis before ordering\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStamped steel to the original floor profile for a correct weld-in fit\u003c\/li\u003e\n\u003cli\u003eTargets left-side floor rust without disturbing the right side\u003c\/li\u003e\n\u003cli\u003eCross-references OE Porsche part 911-501-935-00\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eJP Group Part #: JP-1967-0\u003c\/li\u003e\n\u003cli\u003eAlternate\/OE cross-reference: 1683100170 \/ 911-501-935-00\u003c\/li\u003e\n\u003cli\u003ePosition: Left\u003c\/li\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eInstallation: Weld-in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eQ: Do I need the right half too?\u003c\/strong\u003e\u003cbr\u003eA: Only if the passenger-side floor is also rusted; order our matching right floor pan half (JP-1968-0) separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: Is welding required?\u003c\/strong\u003e\u003cbr\u003eA: Yes, this is a structural weld-in panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProp 65 Warning:\u003c\/strong\u003e This product can expose you to chemicals including lead, known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.p65warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"JP GROUP","offers":[{"title":"Default Title","offer_id":45064379596915,"sku":"JP-1967-0","price":324.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/JP-1967-0.jpg?v=1780467828"},{"product_id":"floor-pan-half-right-porsche-911-912-jp-1968-0","title":"Floor Pan Half, Right — Porsche 911 \/ 912 (JP-1968-0)","description":"\u003cp\u003eRight floor pan half for Porsche 911 \/ 912, manufactured by JP Group. This weld-in steel restoration panel replaces the passenger-side floor section without requiring full-floor replacement.\u003c\/p\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePorsche 911 \/ 912, classic long-hood chassis (1965–1973) — confirm your exact chassis before ordering\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStamped steel to the original floor profile for a correct weld-in fit\u003c\/li\u003e\n\u003cli\u003eTargets right-side floor rust without disturbing the left side\u003c\/li\u003e\n\u003cli\u003eCross-references OE Porsche part 911-501-936-00\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eJP Group Part #: JP-1968-0\u003c\/li\u003e\n\u003cli\u003eAlternate\/OE cross-reference: 1683100180 \/ 911-501-936-00\u003c\/li\u003e\n\u003cli\u003ePosition: Right\u003c\/li\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eInstallation: Weld-in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eQ: Do I need the left half too?\u003c\/strong\u003e\u003cbr\u003eA: Only if the driver-side floor is also rusted; order our matching left floor pan half (JP-1967-0) separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: Is welding required?\u003c\/strong\u003e\u003cbr\u003eA: Yes, this is a structural weld-in panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProp 65 Warning:\u003c\/strong\u003e This product can expose you to chemicals including lead, known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.p65warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"JP GROUP","offers":[{"title":"Default Title","offer_id":45064379629683,"sku":"JP-1968-0","price":284.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/JP-1968-0.jpg?v=1780467832"},{"product_id":"floor-pan-front-with-hook-porsche-911-912-jp-1973-0","title":"Floor Pan Front, with Hook — Porsche 911 \/ 912 (JP-1973-0)","description":"\u003cp\u003eFront floor pan section with integrated jack hook for Porsche 911 \/ 912, manufactured by JP Group. This weld-in steel restoration panel replaces the front floor area including the factory jack point.\u003c\/p\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePorsche 911 \/ 912, classic long-hood chassis (1965–1973) — confirm your exact chassis before ordering\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStamped steel to the original front floor profile, including jack hook\u003c\/li\u003e\n\u003cli\u003eRestores a correct, structurally sound jack point\u003c\/li\u003e\n\u003cli\u003eCross-references OE Porsche part 901-501-580-20\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eJP Group Part #: JP-1973-0\u003c\/li\u003e\n\u003cli\u003eAlternate\/OE cross-reference: 1683101800 \/ 901-501-580-20\u003c\/li\u003e\n\u003cli\u003eIncludes: Jack hook\u003c\/li\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eInstallation: Weld-in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eQ: What makes this different from the standard front floor pan?\u003c\/strong\u003e\u003cbr\u003eA: This version includes the integrated jack hook; see JP-1974-0\/JP-1975-0 for versions without it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: Is welding required?\u003c\/strong\u003e\u003cbr\u003eA: Yes, this is a structural weld-in panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProp 65 Warning:\u003c\/strong\u003e This product can expose you to chemicals including lead, known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.p65warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"JP GROUP","offers":[{"title":"Default Title","offer_id":45064379891827,"sku":"JP-1973-0","price":349.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/JP-1973-0.jpg?v=1780467836"},{"product_id":"floor-pan-front-porsche-911-912-jp-1974-0","title":"Floor Pan Front — Porsche 911 \/ 912 (JP-1974-0)","description":"\u003cp\u003eFront floor pan section for Porsche 911 \/ 912, manufactured by JP Group. This weld-in steel restoration panel replaces a rusted front floor area.\u003c\/p\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePorsche 911 \/ 912, classic long-hood chassis (1965–1973) — confirm your exact chassis and jack-hook configuration before ordering\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStamped steel to the original front floor profile\u003c\/li\u003e\n\u003cli\u003eRestores structural integrity to the front floor area\u003c\/li\u003e\n\u003cli\u003eCross-references OE Porsche part 1683102300\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eJP Group Part #: JP-1974-0\u003c\/li\u003e\n\u003cli\u003eAlternate\/OE cross-reference: 1683102300\u003c\/li\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eInstallation: Weld-in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eQ: Does this include the jack hook?\u003c\/strong\u003e\u003cbr\u003eA: No — see JP-1973-0 for the version with integrated jack hook.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: Is welding required?\u003c\/strong\u003e\u003cbr\u003eA: Yes, this is a structural weld-in panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProp 65 Warning:\u003c\/strong\u003e This product can expose you to chemicals including lead, known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.p65warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"JP GROUP","offers":[{"title":"Default Title","offer_id":45064380383347,"sku":"JP-1974-0","price":424.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/JP-1974-0.jpg?v=1780467839"},{"product_id":"floor-pan-front-porsche-911-912-jp-1975-0","title":"Floor Pan Front — Porsche 911 \/ 912 (JP-1975-0)","description":"\u003cp\u003eFront floor pan section for Porsche 911 \/ 912, manufactured by JP Group. This weld-in steel restoration panel replaces a rusted front floor area, an alternate profile\/vintage to our JP-1974-0 listing.\u003c\/p\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePorsche 911 \/ 912, classic long-hood chassis (1965–1973) — confirm your exact chassis and panel profile before ordering\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStamped steel to the original front floor profile\u003c\/li\u003e\n\u003cli\u003eRestores structural integrity to the front floor area\u003c\/li\u003e\n\u003cli\u003eCross-references OE Porsche part 1683102400\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eJP Group Part #: JP-1975-0\u003c\/li\u003e\n\u003cli\u003eAlternate\/OE cross-reference: 1683102400\u003c\/li\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eInstallation: Weld-in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eQ: How is this different from JP-1974-0?\u003c\/strong\u003e\u003cbr\u003eA: These are two distinct front floor pan part numbers\/profiles from JP Group — verify which matches your chassis before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: Is welding required?\u003c\/strong\u003e\u003cbr\u003eA: Yes, this is a structural weld-in panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProp 65 Warning:\u003c\/strong\u003e This product can expose you to chemicals including lead, known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.p65warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"JP GROUP","offers":[{"title":"Default Title","offer_id":45064380842099,"sku":"JP-1975-0","price":424.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/JP-1975-0.jpg?v=1780467844"},{"product_id":"floor-pan-reinforcement-porsche-911-912-jp-1976-0","title":"Floor Pan Reinforcement — Porsche 911 \/ 912 (JP-1976-0)","description":"\u003cp\u003eFloor pan reinforcement piece for Porsche 911 \/ 912, manufactured by JP Group. This weld-in steel restoration panel adds back structural reinforcement to a repaired or original floor section.\u003c\/p\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePorsche 911 \/ 912, classic long-hood chassis (1965–1973) — confirm your exact chassis before ordering\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStamped steel to the original reinforcement profile\u003c\/li\u003e\n\u003cli\u003eRestores floor stiffness at a common stress point\u003c\/li\u003e\n\u003cli\u003eCross-references OE Porsche part 1683150200\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eJP Group Part #: JP-1976-0\u003c\/li\u003e\n\u003cli\u003eAlternate\/OE cross-reference: 1683150200\u003c\/li\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eInstallation: Weld-in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eQ: When would I need this piece?\u003c\/strong\u003e\u003cbr\u003eA: When reinforcing a repaired floor pan or replacing a rusted-out original reinforcement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: Is welding required?\u003c\/strong\u003e\u003cbr\u003eA: Yes, this is a structural weld-in panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProp 65 Warning:\u003c\/strong\u003e This product can expose you to chemicals including lead, known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.p65warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"JP GROUP","offers":[{"title":"Default Title","offer_id":45064381202547,"sku":"JP-1976-0","price":16.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/JP-1976-0.jpg?v=1780467848"},{"product_id":"rear-quarter-panel-right-full-porsche-911-912-jp-1837-0","title":"Rear Quarter Panel, Right (Full) — Porsche 911 \/ 912 (JP-1837-0)","description":"\u003cp\u003eFull right rear quarter panel for Porsche 911 \/ 912, manufactured by JP Group. This weld-in steel restoration panel replaces the entire passenger-side rear quarter section, from wheel arch to rear valance.\u003c\/p\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePorsche 911 \/ 912, classic long-hood chassis (1965–1973) — confirm your exact chassis before ordering\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFull-panel coverage for extensive quarter panel rust or collision damage\u003c\/li\u003e\n\u003cli\u003eStamped steel to the original quarter panel profile\u003c\/li\u003e\n\u003cli\u003eCross-references OE Porsche part 1680400380\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eJP Group Part #: JP-1837-0\u003c\/li\u003e\n\u003cli\u003eAlternate\/OE cross-reference: 1680400380\u003c\/li\u003e\n\u003cli\u003ePosition: Right, Full panel\u003c\/li\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eInstallation: Weld-in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eQ: Full panel vs. partial — which do I need?\u003c\/strong\u003e\u003cbr\u003eA: Choose this full panel for extensive damage; see our partial (JP-1841-0) or standard (JP-1839-0) right quarter panel listings for lesser repairs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: Is welding required?\u003c\/strong\u003e\u003cbr\u003eA: Yes, this is a structural weld-in panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProp 65 Warning:\u003c\/strong\u003e This product can expose you to chemicals including lead, known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.p65warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"JP GROUP","offers":[{"title":"Default Title","offer_id":45064382185587,"sku":"JP-1837-0","price":1569.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/1680400380-scaled.jpg?v=1780467856"},{"product_id":"rear-quarter-panel-left-porsche-911-912-jp-1838-0","title":"Rear Quarter Panel, Left — Porsche 911 \/ 912 (JP-1838-0)","description":"\u003cp\u003eLeft rear quarter panel for Porsche 911 \/ 912, manufactured by JP Group. This weld-in steel restoration panel replaces the driver-side rear quarter section for standard-scope repairs.\u003c\/p\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePorsche 911 \/ 912, classic long-hood chassis (1965–1973) — confirm your exact chassis before ordering\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStamped steel to the original quarter panel profile\u003c\/li\u003e\n\u003cli\u003eStandard coverage for common rust\/damage areas\u003c\/li\u003e\n\u003cli\u003eCross-references OE Porsche part 1680400570\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eJP Group Part #: JP-1838-0\u003c\/li\u003e\n\u003cli\u003eAlternate\/OE cross-reference: 1680400570\u003c\/li\u003e\n\u003cli\u003ePosition: Left\u003c\/li\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eInstallation: Weld-in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eQ: How is this different from the full panel (JP-1836-0)?\u003c\/strong\u003e\u003cbr\u003eA: This is a smaller-coverage standard panel; choose the full panel (JP-1836-0) for more extensive damage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: Is welding required?\u003c\/strong\u003e\u003cbr\u003eA: Yes, this is a structural weld-in panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProp 65 Warning:\u003c\/strong\u003e This product can expose you to chemicals including lead, known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.p65warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"JP GROUP","offers":[{"title":"Default Title","offer_id":45064382546035,"sku":"JP-1838-0","price":1569.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/1680400570-scaled.jpg?v=1780467861"},{"product_id":"rear-quarter-panel-right-porsche-911-912-jp-1839-0","title":"Rear Quarter Panel, Right — Porsche 911 \/ 912 (JP-1839-0)","description":"\u003cp\u003eRight rear quarter panel for Porsche 911 \/ 912, manufactured by JP Group. This weld-in steel restoration panel replaces the passenger-side rear quarter section for standard-scope repairs.\u003c\/p\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePorsche 911 \/ 912, classic long-hood chassis (1965–1973) — confirm your exact chassis before ordering\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStamped steel to the original quarter panel profile\u003c\/li\u003e\n\u003cli\u003eStandard coverage for common rust\/damage areas\u003c\/li\u003e\n\u003cli\u003eCross-references OE Porsche part 1680400580\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eJP Group Part #: JP-1839-0\u003c\/li\u003e\n\u003cli\u003eAlternate\/OE cross-reference: 1680400580\u003c\/li\u003e\n\u003cli\u003ePosition: Right\u003c\/li\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eInstallation: Weld-in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eQ: How is this different from the full panel (JP-1837-0)?\u003c\/strong\u003e\u003cbr\u003eA: This is a smaller-coverage standard panel; choose the full panel (JP-1837-0) for more extensive damage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: Is welding required?\u003c\/strong\u003e\u003cbr\u003eA: Yes, this is a structural weld-in panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProp 65 Warning:\u003c\/strong\u003e This product can expose you to chemicals including lead, known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.p65warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"JP GROUP","offers":[{"title":"Default Title","offer_id":45064382873715,"sku":"JP-1839-0","price":1459.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/JP-1839-0.jpg?v=1780467866"},{"product_id":"rear-lower-panel-porsche-911-912-jp-1866-0","title":"Rear Lower Panel — Porsche 911 \/ 912 (JP-1866-0)","description":"\u003cp\u003eRear lower body panel for Porsche 911 \/ 912, manufactured by JP Group. This weld-in steel restoration panel restores the lower rear valance\/body section, a common rust and stone-chip damage area.\u003c\/p\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePorsche 911 \/ 912, classic long-hood chassis (1965–1973) — confirm your exact chassis before ordering\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStamped steel to the original lower rear panel profile\u003c\/li\u003e\n\u003cli\u003eRestores structural and cosmetic integrity to the rear lower body\u003c\/li\u003e\n\u003cli\u003eCross-references OE Porsche part 1680600100\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eJP Group Part #: JP-1866-0\u003c\/li\u003e\n\u003cli\u003eAlternate\/OE cross-reference: 1680600100\u003c\/li\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eInstallation: Weld-in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eQ: Where on the car is this panel located?\u003c\/strong\u003e\u003cbr\u003eA: The lower rear body\/valance section, below the engine lid.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: Is welding required?\u003c\/strong\u003e\u003cbr\u003eA: Yes, this is a structural weld-in panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProp 65 Warning:\u003c\/strong\u003e This product can expose you to chemicals including lead, known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.p65warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"JP GROUP","offers":[{"title":"Default Title","offer_id":45064384086131,"sku":"JP-1866-0","price":909.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/1680600100.jpg?v=1780467880"},{"product_id":"lower-rear-panel-porsche-911-912-jp-1876-0","title":"Lower Rear Panel — Porsche 911 \/ 912 (JP-1876-0)","description":"\u003cp\u003eLower rear body panel for Porsche 911 \/ 912, manufactured by JP Group. This weld-in steel restoration panel restores an alternate lower rear body section, a common rust and stone-chip damage area.\u003c\/p\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePorsche 911 \/ 912, classic long-hood chassis (1965–1973) — confirm your exact chassis and panel profile before ordering\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStamped steel to the original lower rear panel profile\u003c\/li\u003e\n\u003cli\u003eRestores structural and cosmetic integrity to the rear lower body\u003c\/li\u003e\n\u003cli\u003eCross-references OE Porsche part 1680601400\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eJP Group Part #: JP-1876-0\u003c\/li\u003e\n\u003cli\u003eAlternate\/OE cross-reference: 1680601400\u003c\/li\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eInstallation: Weld-in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eQ: How is this different from JP-1866-0?\u003c\/strong\u003e\u003cbr\u003eA: These are two distinct JP Group lower rear panel part numbers\/profiles — verify which matches your chassis before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: Is welding required?\u003c\/strong\u003e\u003cbr\u003eA: Yes, this is a structural weld-in panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProp 65 Warning:\u003c\/strong\u003e This product can expose you to chemicals including lead, known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.p65warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"JP GROUP","offers":[{"title":"Default Title","offer_id":45064384381043,"sku":"JP-1876-0","price":889.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/1680601400-scaled.jpg?v=1780467884"},{"product_id":"lower-rear-panel-porsche-911-912-jp-1881-0","title":"Lower Rear Panel — Porsche 911 \/ 912 (JP-1881-0)","description":"\u003cp\u003eStop rust in its tracks. This JP Group lower rear body panel is a direct, weld-in replacement for the Porsche 911\/912's original steel panel — built to the factory profile so your restoration or rust-repair goes back together the way it left the factory.\u003c\/p\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1965–1973 Porsche 911; 1965–1969 Porsche 912\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStamped from steel to match the original factory panel profile for accurate, weld-in fitment\u003c\/li\u003e\n\u003cli\u003eBare steel finish — ready for weld-in installation, seam sealing, epoxy primer, and paint\u003c\/li\u003e\n\u003cli\u003eEliminates the need to fabricate a repair section by hand or source hard-to-find used sheet metal\u003c\/li\u003e\n\u003cli\u003eManufactured by JP Group (Denmark), a long-established supplier of classic Porsche restoration sheet metal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart #: JP-1881-0 · Interchange\/OEM ref: 1680602900\u003c\/li\u003e\n\u003cli\u003eMaterial: Stamped steel\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: Denmark\u003c\/li\u003e\n\u003cli\u003eCondition: New, aftermarket reproduction\u003c\/li\u003e\n\u003cli\u003eApproximate shipping dimensions: 46 x 22 x 6 in (L x W x H), 22 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this panel made from?\u003c\/strong\u003e\u003cbr\u003eStamped steel, supplied bare and ready for weld-in installation, seam sealing, and paint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Porsche part or an aftermarket reproduction?\u003c\/strong\u003e\u003cbr\u003eThis is an aftermarket reproduction manufactured by JP Group of Denmark, built to match the factory panel's fit and profile — it is not a genuine Porsche OEM part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it require welding to install?\u003c\/strong\u003e\u003cbr\u003eYes. This is a weld-in restoration panel intended for installation by a qualified body shop or experienced fabricator using standard MIG or spot-welding techniques.\u003c\/p\u003e\u003cp class=\"prop65-warning\"\u003e\u003cstrong\u003e⚠ WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"JP GROUP","offers":[{"title":"Default Title","offer_id":45064384610419,"sku":"JP-1881-0","price":879.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/1680602900-scaled.jpg?v=1780467887"},{"product_id":"lower-rear-panel-porsche-911-912-jp-1882-0","title":"Lower Rear Panel — Porsche 911 \/ 912 (JP-1882-0)","description":"\u003cp\u003eStop rust in its tracks. This JP Group lower rear body panel is a direct, weld-in replacement for the Porsche 911\/912's original steel panel — built to the factory profile so your restoration or rust-repair goes back together the way it left the factory.\u003c\/p\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1965–1973 Porsche 911; 1965–1969 Porsche 912\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStamped from steel to match the original factory panel profile for accurate, weld-in fitment\u003c\/li\u003e\n\u003cli\u003eBare steel finish — ready for weld-in installation, seam sealing, epoxy primer, and paint\u003c\/li\u003e\n\u003cli\u003eEliminates the need to fabricate a repair section by hand or source hard-to-find used sheet metal\u003c\/li\u003e\n\u003cli\u003eManufactured by JP Group (Denmark), a long-established supplier of classic Porsche restoration sheet metal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart #: JP-1882-0 · Interchange\/OEM ref: 1680603000\u003c\/li\u003e\n\u003cli\u003eMaterial: Stamped steel\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: Denmark\u003c\/li\u003e\n\u003cli\u003eCondition: New, aftermarket reproduction\u003c\/li\u003e\n\u003cli\u003eApproximate shipping dimensions: 34 x 18 x 5 in (L x W x H), 12 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this panel made from?\u003c\/strong\u003e\u003cbr\u003eStamped steel, supplied bare and ready for weld-in installation, seam sealing, and paint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Porsche part or an aftermarket reproduction?\u003c\/strong\u003e\u003cbr\u003eThis is an aftermarket reproduction manufactured by JP Group of Denmark, built to match the factory panel's fit and profile — it is not a genuine Porsche OEM part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it require welding to install?\u003c\/strong\u003e\u003cbr\u003eYes. This is a weld-in restoration panel intended for installation by a qualified body shop or experienced fabricator using standard MIG or spot-welding techniques.\u003c\/p\u003e\u003cp class=\"prop65-warning\"\u003e\u003cstrong\u003e⚠ WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"JP GROUP","offers":[{"title":"Default Title","offer_id":45064384839795,"sku":"JP-1882-0","price":404.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/JP-1882-0.jpg?v=1780467893"},{"product_id":"rear-right-panel-porsche-911-912-jp-1870-0","title":"Rear Right Panel — Porsche 911 \/ 912 (JP-1870-0)","description":"\u003cp\u003eStop rust in its tracks. This JP Group rear right body panel is a direct, weld-in replacement for the Porsche 911\/912's original steel panel — built to the factory profile so your restoration or rust-repair goes back together the way it left the factory.\u003c\/p\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1965–1973 Porsche 911; 1965–1969 Porsche 912\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStamped from steel to match the original factory panel profile for accurate, weld-in fitment\u003c\/li\u003e\n\u003cli\u003eBare steel finish — ready for weld-in installation, seam sealing, epoxy primer, and paint\u003c\/li\u003e\n\u003cli\u003eEliminates the need to fabricate a repair section by hand or source hard-to-find used sheet metal\u003c\/li\u003e\n\u003cli\u003eManufactured by JP Group (Denmark), a long-established supplier of classic Porsche restoration sheet metal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart #: JP-1870-0 · Interchange\/OEM ref: 1680600580\u003c\/li\u003e\n\u003cli\u003eMaterial: Stamped steel\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: Denmark\u003c\/li\u003e\n\u003cli\u003eCondition: New, aftermarket reproduction\u003c\/li\u003e\n\u003cli\u003eApproximate shipping dimensions: 24 x 14 x 4 in (L x W x H), 6 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this panel made from?\u003c\/strong\u003e\u003cbr\u003eStamped steel, supplied bare and ready for weld-in installation, seam sealing, and paint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Porsche part or an aftermarket reproduction?\u003c\/strong\u003e\u003cbr\u003eThis is an aftermarket reproduction manufactured by JP Group of Denmark, built to match the factory panel's fit and profile — it is not a genuine Porsche OEM part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it require welding to install?\u003c\/strong\u003e\u003cbr\u003eYes. This is a weld-in restoration panel intended for installation by a qualified body shop or experienced fabricator using standard MIG or spot-welding techniques.\u003c\/p\u003e\u003cp class=\"prop65-warning\"\u003e\u003cstrong\u003e⚠ WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"JP GROUP","offers":[{"title":"Default Title","offer_id":45064385134707,"sku":"JP-1870-0","price":134.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/1680600580.jpg?v=1780467897"},{"product_id":"rear-center-panel-porsche-911-912-jp-1867-0","title":"Rear Center Panel — Porsche 911 \/ 912 (JP-1867-0)","description":"\u003cp\u003eStop rust in its tracks. This JP Group rear center body panel is a direct, weld-in replacement for the Porsche 911\/912's original steel panel — built to the factory profile so your restoration or rust-repair goes back together the way it left the factory.\u003c\/p\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1965–1973 Porsche 911; 1965–1969 Porsche 912\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStamped from steel to match the original factory panel profile for accurate, weld-in fitment\u003c\/li\u003e\n\u003cli\u003eBare steel finish — ready for weld-in installation, seam sealing, epoxy primer, and paint\u003c\/li\u003e\n\u003cli\u003eEliminates the need to fabricate a repair section by hand or source hard-to-find used sheet metal\u003c\/li\u003e\n\u003cli\u003eManufactured by JP Group (Denmark), a long-established supplier of classic Porsche restoration sheet metal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart #: JP-1867-0 · Interchange\/OEM ref: 1680600200 \/ 901-501-031-21\u003c\/li\u003e\n\u003cli\u003eMaterial: Stamped steel\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: Denmark\u003c\/li\u003e\n\u003cli\u003eCondition: New, aftermarket reproduction\u003c\/li\u003e\n\u003cli\u003eApproximate shipping dimensions: 28 x 16 x 4 in (L x W x H), 7 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this panel made from?\u003c\/strong\u003e\u003cbr\u003eStamped steel, supplied bare and ready for weld-in installation, seam sealing, and paint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Porsche part or an aftermarket reproduction?\u003c\/strong\u003e\u003cbr\u003eThis is an aftermarket reproduction manufactured by JP Group of Denmark, built to match the factory panel's fit and profile — it is not a genuine Porsche OEM part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it require welding to install?\u003c\/strong\u003e\u003cbr\u003eYes. This is a weld-in restoration panel intended for installation by a qualified body shop or experienced fabricator using standard MIG or spot-welding techniques.\u003c\/p\u003e\u003cp class=\"prop65-warning\"\u003e\u003cstrong\u003e⚠ WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"JP GROUP","offers":[{"title":"Default Title","offer_id":45064385429619,"sku":"JP-1867-0","price":429.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/1680600200-scaled.jpg?v=1780467900"},{"product_id":"parcel-shelf-porsche-911-912-jp-1873-0","title":"Parcel Shelf — Porsche 911 \/ 912 (JP-1873-0)","description":"\u003cp\u003eStop rust in its tracks. This JP Group parcel shelf panel is a direct, weld-in replacement for the Porsche 911\/912's original steel panel — built to the factory profile so your restoration or rust-repair goes back together the way it left the factory.\u003c\/p\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1965–1973 Porsche 911; 1965–1969 Porsche 912\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStamped from steel to match the original factory panel profile for accurate, weld-in fitment\u003c\/li\u003e\n\u003cli\u003eBare steel finish — ready for weld-in installation, seam sealing, epoxy primer, and paint\u003c\/li\u003e\n\u003cli\u003eEliminates the need to fabricate a repair section by hand or source hard-to-find used sheet metal\u003c\/li\u003e\n\u003cli\u003eManufactured by JP Group (Denmark), a long-established supplier of classic Porsche restoration sheet metal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart #: JP-1873-0 · Interchange\/OEM ref: 1680600900\u003c\/li\u003e\n\u003cli\u003eMaterial: Stamped steel\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: Denmark\u003c\/li\u003e\n\u003cli\u003eCondition: New, aftermarket reproduction\u003c\/li\u003e\n\u003cli\u003eApproximate shipping dimensions: 30 x 18 x 4 in (L x W x H), 8 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this panel made from?\u003c\/strong\u003e\u003cbr\u003eStamped steel, supplied bare and ready for weld-in installation, seam sealing, and paint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Porsche part or an aftermarket reproduction?\u003c\/strong\u003e\u003cbr\u003eThis is an aftermarket reproduction manufactured by JP Group of Denmark, built to match the factory panel's fit and profile — it is not a genuine Porsche OEM part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it require welding to install?\u003c\/strong\u003e\u003cbr\u003eYes. This is a weld-in restoration panel intended for installation by a qualified body shop or experienced fabricator using standard MIG or spot-welding techniques.\u003c\/p\u003e\u003cp class=\"prop65-warning\"\u003e\u003cstrong\u003e⚠ WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"JP GROUP","offers":[{"title":"Default Title","offer_id":45064385921139,"sku":"JP-1873-0","price":279.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/JP-1873-0.jpg?v=1780467905"},{"product_id":"front-panel-porsche-911-912-jp-1846-0","title":"Front Panel — Porsche 911 \/ 912 (JP-1846-0)","description":"\u003cp\u003eStop rust in its tracks. This JP Group front body panel is a direct, weld-in replacement for the Porsche 911\/912's original steel panel — built to the factory profile so your restoration or rust-repair goes back together the way it left the factory.\u003c\/p\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1965–1973 Porsche 911; 1965–1969 Porsche 912\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStamped from steel to match the original factory panel profile for accurate, weld-in fitment\u003c\/li\u003e\n\u003cli\u003eBare steel finish — ready for weld-in installation, seam sealing, epoxy primer, and paint\u003c\/li\u003e\n\u003cli\u003eEliminates the need to fabricate a repair section by hand or source hard-to-find used sheet metal\u003c\/li\u003e\n\u003cli\u003eManufactured by JP Group (Denmark), a long-established supplier of classic Porsche restoration sheet metal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart #: JP-1846-0 · Interchange\/OEM ref: 1680500100\u003c\/li\u003e\n\u003cli\u003eMaterial: Stamped steel\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: Denmark\u003c\/li\u003e\n\u003cli\u003eCondition: New, aftermarket reproduction\u003c\/li\u003e\n\u003cli\u003eApproximate shipping dimensions: 40 x 16 x 5 in (L x W x H), 12 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this panel made from?\u003c\/strong\u003e\u003cbr\u003eStamped steel, supplied bare and ready for weld-in installation, seam sealing, and paint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Porsche part or an aftermarket reproduction?\u003c\/strong\u003e\u003cbr\u003eThis is an aftermarket reproduction manufactured by JP Group of Denmark, built to match the factory panel's fit and profile — it is not a genuine Porsche OEM part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it require welding to install?\u003c\/strong\u003e\u003cbr\u003eYes. This is a weld-in restoration panel intended for installation by a qualified body shop or experienced fabricator using standard MIG or spot-welding techniques.\u003c\/p\u003e\u003cp class=\"prop65-warning\"\u003e\u003cstrong\u003e⚠ WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"JP GROUP","offers":[{"title":"Default Title","offer_id":45064389394547,"sku":"JP-1846-0","price":494.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/1680500100-scaled.jpg?v=1780467914"},{"product_id":"front-panel-porsche-911-912-jp-1847-0","title":"Front Panel — Porsche 911 \/ 912 (JP-1847-0)","description":"\u003cp\u003eStop rust in its tracks. This JP Group front body panel is a direct, weld-in replacement for the Porsche 911\/912's original steel panel — built to the factory profile so your restoration or rust-repair goes back together the way it left the factory.\u003c\/p\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1965–1973 Porsche 911; 1965–1969 Porsche 912\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStamped from steel to match the original factory panel profile for accurate, weld-in fitment\u003c\/li\u003e\n\u003cli\u003eBare steel finish — ready for weld-in installation, seam sealing, epoxy primer, and paint\u003c\/li\u003e\n\u003cli\u003eEliminates the need to fabricate a repair section by hand or source hard-to-find used sheet metal\u003c\/li\u003e\n\u003cli\u003eManufactured by JP Group (Denmark), a long-established supplier of classic Porsche restoration sheet metal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart #: JP-1847-0 · Interchange\/OEM ref: 1680500200 \/ 901-501-031-21\u003c\/li\u003e\n\u003cli\u003eMaterial: Stamped steel\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: Denmark\u003c\/li\u003e\n\u003cli\u003eCondition: New, aftermarket reproduction\u003c\/li\u003e\n\u003cli\u003eApproximate shipping dimensions: 40 x 16 x 5 in (L x W x H), 12 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this panel made from?\u003c\/strong\u003e\u003cbr\u003eStamped steel, supplied bare and ready for weld-in installation, seam sealing, and paint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Porsche part or an aftermarket reproduction?\u003c\/strong\u003e\u003cbr\u003eThis is an aftermarket reproduction manufactured by JP Group of Denmark, built to match the factory panel's fit and profile — it is not a genuine Porsche OEM part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it require welding to install?\u003c\/strong\u003e\u003cbr\u003eYes. This is a weld-in restoration panel intended for installation by a qualified body shop or experienced fabricator using standard MIG or spot-welding techniques.\u003c\/p\u003e\u003cp class=\"prop65-warning\"\u003e\u003cstrong\u003e⚠ WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"JP GROUP","offers":[{"title":"Default Title","offer_id":45064389427315,"sku":"JP-1847-0","price":444.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/1680500200-scaled.jpg?v=1780467920"},{"product_id":"front-apron-porsche-911-912-jp-1850-0","title":"Front Apron — Porsche 911 \/ 912 (JP-1850-0)","description":"\u003cp\u003eStop rust in its tracks. This JP Group front apron panel is a direct, weld-in replacement for the Porsche 911\/912's original steel panel — built to the factory profile so your restoration or rust-repair goes back together the way it left the factory.\u003c\/p\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1965–1973 Porsche 911; 1965–1969 Porsche 912\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStamped from steel to match the original factory panel profile for accurate, weld-in fitment\u003c\/li\u003e\n\u003cli\u003eBare steel finish — ready for weld-in installation, seam sealing, epoxy primer, and paint\u003c\/li\u003e\n\u003cli\u003eEliminates the need to fabricate a repair section by hand or source hard-to-find used sheet metal\u003c\/li\u003e\n\u003cli\u003eManufactured by JP Group (Denmark), a long-established supplier of classic Porsche restoration sheet metal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart #: JP-1850-0 · Interchange\/OEM ref: 1680500700\u003c\/li\u003e\n\u003cli\u003eMaterial: Stamped steel\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: Denmark\u003c\/li\u003e\n\u003cli\u003eCondition: New, aftermarket reproduction\u003c\/li\u003e\n\u003cli\u003eApproximate shipping dimensions: 44 x 20 x 6 in (L x W x H), 16 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this panel made from?\u003c\/strong\u003e\u003cbr\u003eStamped steel, supplied bare and ready for weld-in installation, seam sealing, and paint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Porsche part or an aftermarket reproduction?\u003c\/strong\u003e\u003cbr\u003eThis is an aftermarket reproduction manufactured by JP Group of Denmark, built to match the factory panel's fit and profile — it is not a genuine Porsche OEM part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it require welding to install?\u003c\/strong\u003e\u003cbr\u003eYes. This is a weld-in restoration panel intended for installation by a qualified body shop or experienced fabricator using standard MIG or spot-welding techniques.\u003c\/p\u003e\u003cp class=\"prop65-warning\"\u003e\u003cstrong\u003e⚠ WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"JP GROUP","offers":[{"title":"Default Title","offer_id":45064389460083,"sku":"JP-1850-0","price":699.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/1680500700-scaled.jpg?v=1780467923"},{"product_id":"front-apron-porsche-911-912-jp-1851-0","title":"Front Apron — Porsche 911 \/ 912 (JP-1851-0)","description":"\u003cp\u003eStop rust in its tracks. This JP Group front apron panel is a direct, weld-in replacement for the Porsche 911\/912's original steel panel — built to the factory profile so your restoration or rust-repair goes back together the way it left the factory.\u003c\/p\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1965–1973 Porsche 911; 1965–1969 Porsche 912\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStamped from steel to match the original factory panel profile for accurate, weld-in fitment\u003c\/li\u003e\n\u003cli\u003eBare steel finish — ready for weld-in installation, seam sealing, epoxy primer, and paint\u003c\/li\u003e\n\u003cli\u003eEliminates the need to fabricate a repair section by hand or source hard-to-find used sheet metal\u003c\/li\u003e\n\u003cli\u003eManufactured by JP Group (Denmark), a long-established supplier of classic Porsche restoration sheet metal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart #: JP-1851-0 · Interchange\/OEM ref: 1680500800\u003c\/li\u003e\n\u003cli\u003eMaterial: Stamped steel\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: Denmark\u003c\/li\u003e\n\u003cli\u003eCondition: New, aftermarket reproduction\u003c\/li\u003e\n\u003cli\u003eApproximate shipping dimensions: 42 x 20 x 6 in (L x W x H), 15 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this panel made from?\u003c\/strong\u003e\u003cbr\u003eStamped steel, supplied bare and ready for weld-in installation, seam sealing, and paint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Porsche part or an aftermarket reproduction?\u003c\/strong\u003e\u003cbr\u003eThis is an aftermarket reproduction manufactured by JP Group of Denmark, built to match the factory panel's fit and profile — it is not a genuine Porsche OEM part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it require welding to install?\u003c\/strong\u003e\u003cbr\u003eYes. This is a weld-in restoration panel intended for installation by a qualified body shop or experienced fabricator using standard MIG or spot-welding techniques.\u003c\/p\u003e\u003cp class=\"prop65-warning\"\u003e\u003cstrong\u003e⚠ WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"JP GROUP","offers":[{"title":"Default Title","offer_id":45064389492851,"sku":"JP-1851-0","price":729.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/1680500800-scaled.jpg?v=1780467927"},{"product_id":"front-lower-panel-left-porsche-911-912-jp-1852-0","title":"Front Lower Panel, Left — Porsche 911 \/ 912 (JP-1852-0)","description":"\u003cp\u003eStop rust in its tracks. This JP Group front lower left panel is a direct, weld-in replacement for the Porsche 911\/912's original steel panel — built to the factory profile so your restoration or rust-repair goes back together the way it left the factory.\u003c\/p\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1965–1973 Porsche 911; 1965–1969 Porsche 912\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStamped from steel to match the original factory panel profile for accurate, weld-in fitment\u003c\/li\u003e\n\u003cli\u003eBare steel finish — ready for weld-in installation, seam sealing, epoxy primer, and paint\u003c\/li\u003e\n\u003cli\u003eEliminates the need to fabricate a repair section by hand or source hard-to-find used sheet metal\u003c\/li\u003e\n\u003cli\u003eManufactured by JP Group (Denmark), a long-established supplier of classic Porsche restoration sheet metal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart #: JP-1852-0 · Interchange\/OEM ref: 1680500970\u003c\/li\u003e\n\u003cli\u003eMaterial: Stamped steel\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: Denmark\u003c\/li\u003e\n\u003cli\u003eCondition: New, aftermarket reproduction\u003c\/li\u003e\n\u003cli\u003eApproximate shipping dimensions: 20 x 12 x 4 in (L x W x H), 4 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this panel made from?\u003c\/strong\u003e\u003cbr\u003eStamped steel, supplied bare and ready for weld-in installation, seam sealing, and paint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Porsche part or an aftermarket reproduction?\u003c\/strong\u003e\u003cbr\u003eThis is an aftermarket reproduction manufactured by JP Group of Denmark, built to match the factory panel's fit and profile — it is not a genuine Porsche OEM part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it require welding to install?\u003c\/strong\u003e\u003cbr\u003eYes. This is a weld-in restoration panel intended for installation by a qualified body shop or experienced fabricator using standard MIG or spot-welding techniques.\u003c\/p\u003e\u003cp class=\"prop65-warning\"\u003e\u003cstrong\u003e⚠ WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"JP GROUP","offers":[{"title":"Default Title","offer_id":45064389525619,"sku":"JP-1852-0","price":379.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/1680500970.jpg?v=1780467931"},{"product_id":"front-lower-panel-right-porsche-911-912-jp-1853-0","title":"Front Lower Panel, Right — Porsche 911 \/ 912 (JP-1853-0)","description":"\u003cp\u003eStop rust in its tracks. This JP Group front lower right panel is a direct, weld-in replacement for the Porsche 911\/912's original steel panel — built to the factory profile so your restoration or rust-repair goes back together the way it left the factory.\u003c\/p\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1965–1973 Porsche 911; 1965–1969 Porsche 912\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStamped from steel to match the original factory panel profile for accurate, weld-in fitment\u003c\/li\u003e\n\u003cli\u003eBare steel finish — ready for weld-in installation, seam sealing, epoxy primer, and paint\u003c\/li\u003e\n\u003cli\u003eEliminates the need to fabricate a repair section by hand or source hard-to-find used sheet metal\u003c\/li\u003e\n\u003cli\u003eManufactured by JP Group (Denmark), a long-established supplier of classic Porsche restoration sheet metal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart #: JP-1853-0 · Interchange\/OEM ref: 1680500980\u003c\/li\u003e\n\u003cli\u003eMaterial: Stamped steel\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: Denmark\u003c\/li\u003e\n\u003cli\u003eCondition: New, aftermarket reproduction\u003c\/li\u003e\n\u003cli\u003eApproximate shipping dimensions: 20 x 12 x 4 in (L x W x H), 4 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this panel made from?\u003c\/strong\u003e\u003cbr\u003eStamped steel, supplied bare and ready for weld-in installation, seam sealing, and paint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Porsche part or an aftermarket reproduction?\u003c\/strong\u003e\u003cbr\u003eThis is an aftermarket reproduction manufactured by JP Group of Denmark, built to match the factory panel's fit and profile — it is not a genuine Porsche OEM part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it require welding to install?\u003c\/strong\u003e\u003cbr\u003eYes. This is a weld-in restoration panel intended for installation by a qualified body shop or experienced fabricator using standard MIG or spot-welding techniques.\u003c\/p\u003e\u003cp class=\"prop65-warning\"\u003e\u003cstrong\u003e⚠ WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"JP GROUP","offers":[{"title":"Default Title","offer_id":45064389558387,"sku":"JP-1853-0","price":259.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/1680500980.jpg?v=1780467934"},{"product_id":"front-lower-panel-left-large-porsche-911-912-jp-1855-0","title":"Front Lower Panel, Left (Large) — Porsche 911 \/ 912 (JP-1855-0)","description":"\u003cp\u003eStop rust in its tracks. This JP Group large front lower left panel is a direct, weld-in replacement for the Porsche 911\/912's original steel panel — built to the factory profile so your restoration or rust-repair goes back together the way it left the factory.\u003c\/p\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1965–1973 Porsche 911; 1965–1969 Porsche 912\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStamped from steel to match the original factory panel profile for accurate, weld-in fitment\u003c\/li\u003e\n\u003cli\u003eBare steel finish — ready for weld-in installation, seam sealing, epoxy primer, and paint\u003c\/li\u003e\n\u003cli\u003eEliminates the need to fabricate a repair section by hand or source hard-to-find used sheet metal\u003c\/li\u003e\n\u003cli\u003eManufactured by JP Group (Denmark), a long-established supplier of classic Porsche restoration sheet metal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart #: JP-1855-0 · Interchange\/OEM ref: 1680501370\u003c\/li\u003e\n\u003cli\u003eMaterial: Stamped steel\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: Denmark\u003c\/li\u003e\n\u003cli\u003eCondition: New, aftermarket reproduction\u003c\/li\u003e\n\u003cli\u003eApproximate shipping dimensions: 30 x 16 x 5 in (L x W x H), 9 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this panel made from?\u003c\/strong\u003e\u003cbr\u003eStamped steel, supplied bare and ready for weld-in installation, seam sealing, and paint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Porsche part or an aftermarket reproduction?\u003c\/strong\u003e\u003cbr\u003eThis is an aftermarket reproduction manufactured by JP Group of Denmark, built to match the factory panel's fit and profile — it is not a genuine Porsche OEM part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it require welding to install?\u003c\/strong\u003e\u003cbr\u003eYes. This is a weld-in restoration panel intended for installation by a qualified body shop or experienced fabricator using standard MIG or spot-welding techniques.\u003c\/p\u003e\u003cp class=\"prop65-warning\"\u003e\u003cstrong\u003e⚠ WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"JP GROUP","offers":[{"title":"Default Title","offer_id":45064389689459,"sku":"JP-1855-0","price":364.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/JP-1855-0.jpg?v=1780467939"},{"product_id":"front-lower-panel-right-large-porsche-911-912-jp-1856-0","title":"Front Lower Panel, Right (Large) — Porsche 911 \/ 912 (JP-1856-0)","description":"\u003cp\u003eStop rust in its tracks. This JP Group large front lower right panel is a direct, weld-in replacement for the Porsche 911\/912's original steel panel — built to the factory profile so your restoration or rust-repair goes back together the way it left the factory.\u003c\/p\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1965–1973 Porsche 911; 1965–1969 Porsche 912\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStamped from steel to match the original factory panel profile for accurate, weld-in fitment\u003c\/li\u003e\n\u003cli\u003eBare steel finish — ready for weld-in installation, seam sealing, epoxy primer, and paint\u003c\/li\u003e\n\u003cli\u003eEliminates the need to fabricate a repair section by hand or source hard-to-find used sheet metal\u003c\/li\u003e\n\u003cli\u003eManufactured by JP Group (Denmark), a long-established supplier of classic Porsche restoration sheet metal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart #: JP-1856-0 · Interchange\/OEM ref: 1680501380\u003c\/li\u003e\n\u003cli\u003eMaterial: Stamped steel\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: Denmark\u003c\/li\u003e\n\u003cli\u003eCondition: New, aftermarket reproduction\u003c\/li\u003e\n\u003cli\u003eApproximate shipping dimensions: 30 x 16 x 5 in (L x W x H), 9 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this panel made from?\u003c\/strong\u003e\u003cbr\u003eStamped steel, supplied bare and ready for weld-in installation, seam sealing, and paint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Porsche part or an aftermarket reproduction?\u003c\/strong\u003e\u003cbr\u003eThis is an aftermarket reproduction manufactured by JP Group of Denmark, built to match the factory panel's fit and profile — it is not a genuine Porsche OEM part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it require welding to install?\u003c\/strong\u003e\u003cbr\u003eYes. This is a weld-in restoration panel intended for installation by a qualified body shop or experienced fabricator using standard MIG or spot-welding techniques.\u003c\/p\u003e\u003cp class=\"prop65-warning\"\u003e\u003cstrong\u003e⚠ WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"JP GROUP","offers":[{"title":"Default Title","offer_id":45064389722227,"sku":"JP-1856-0","price":364.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/JP-1856-0.jpg?v=1780467942"},{"product_id":"front-tank-mount-porsche-911-912-jp-1854-0","title":"Front Tank Mount — Porsche 911 \/ 912 (JP-1854-0)","description":"\u003cp\u003eStop rust in its tracks. This JP Group front fuel tank mount panel is a direct, weld-in replacement for the Porsche 911\/912's original steel panel — built to the factory profile so your restoration or rust-repair goes back together the way it left the factory.\u003c\/p\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1965–1973 Porsche 911; 1965–1969 Porsche 912\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStamped from steel to match the original factory panel profile for accurate, weld-in fitment\u003c\/li\u003e\n\u003cli\u003eBare steel finish — ready for weld-in installation, seam sealing, epoxy primer, and paint\u003c\/li\u003e\n\u003cli\u003eEliminates the need to fabricate a repair section by hand or source hard-to-find used sheet metal\u003c\/li\u003e\n\u003cli\u003eManufactured by JP Group (Denmark), a long-established supplier of classic Porsche restoration sheet metal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart #: JP-1854-0 · Interchange\/OEM ref: 1680501200\u003c\/li\u003e\n\u003cli\u003eMaterial: Stamped steel\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: Denmark\u003c\/li\u003e\n\u003cli\u003eCondition: New, aftermarket reproduction\u003c\/li\u003e\n\u003cli\u003eApproximate shipping dimensions: 14 x 10 x 3 in (L x W x H), 2 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this panel made from?\u003c\/strong\u003e\u003cbr\u003eStamped steel, supplied bare and ready for weld-in installation, seam sealing, and paint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Porsche part or an aftermarket reproduction?\u003c\/strong\u003e\u003cbr\u003eThis is an aftermarket reproduction manufactured by JP Group of Denmark, built to match the factory panel's fit and profile — it is not a genuine Porsche OEM part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it require welding to install?\u003c\/strong\u003e\u003cbr\u003eYes. This is a weld-in restoration panel intended for installation by a qualified body shop or experienced fabricator using standard MIG or spot-welding techniques.\u003c\/p\u003e\u003cp class=\"prop65-warning\"\u003e\u003cstrong\u003e⚠ WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"JP GROUP","offers":[{"title":"Default Title","offer_id":45064389754995,"sku":"JP-1854-0","price":33.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/1680501200-scaled.jpg?v=1780467947"},{"product_id":"front-compartment-panel-porsche-911-912-jp-1857-0","title":"Front Compartment Panel — Porsche 911 \/ 912 (JP-1857-0)","description":"\u003cp\u003eStop rust in its tracks. This JP Group front compartment panel is a direct, weld-in replacement for the Porsche 911\/912's original steel panel — built to the factory profile so your restoration or rust-repair goes back together the way it left the factory.\u003c\/p\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1965–1973 Porsche 911; 1965–1969 Porsche 912\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStamped from steel to match the original factory panel profile for accurate, weld-in fitment\u003c\/li\u003e\n\u003cli\u003eBare steel finish — ready for weld-in installation, seam sealing, epoxy primer, and paint\u003c\/li\u003e\n\u003cli\u003eEliminates the need to fabricate a repair section by hand or source hard-to-find used sheet metal\u003c\/li\u003e\n\u003cli\u003eManufactured by JP Group (Denmark), a long-established supplier of classic Porsche restoration sheet metal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart #: JP-1857-0 · Interchange\/OEM ref: 1680501700\u003c\/li\u003e\n\u003cli\u003eMaterial: Stamped steel\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: Denmark\u003c\/li\u003e\n\u003cli\u003eCondition: New, aftermarket reproduction\u003c\/li\u003e\n\u003cli\u003eApproximate shipping dimensions: 24 x 14 x 4 in (L x W x H), 6 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this panel made from?\u003c\/strong\u003e\u003cbr\u003eStamped steel, supplied bare and ready for weld-in installation, seam sealing, and paint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Porsche part or an aftermarket reproduction?\u003c\/strong\u003e\u003cbr\u003eThis is an aftermarket reproduction manufactured by JP Group of Denmark, built to match the factory panel's fit and profile — it is not a genuine Porsche OEM part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it require welding to install?\u003c\/strong\u003e\u003cbr\u003eYes. This is a weld-in restoration panel intended for installation by a qualified body shop or experienced fabricator using standard MIG or spot-welding techniques.\u003c\/p\u003e\u003cp class=\"prop65-warning\"\u003e\u003cstrong\u003e⚠ WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"JP GROUP","offers":[{"title":"Default Title","offer_id":45064389787763,"sku":"JP-1857-0","price":229.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/JP-1857-0.jpg?v=1780467951"},{"product_id":"front-cross-panel-no-bumper-bracket-porsche-911-912-jp-1861-0","title":"Front Cross Panel (No Bumper Bracket) — Porsche 911 \/ 912 (JP-1861-0)","description":"\u003cp\u003eStop rust in its tracks. This JP Group front cross panel (without bumper molding bracket) is a direct, weld-in replacement for the Porsche 911\/912's original steel panel — built to the factory profile so your restoration or rust-repair goes back together the way it left the factory.\u003c\/p\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1965–1973 Porsche 911; 1965–1969 Porsche 912\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStamped from steel to match the original factory panel profile for accurate, weld-in fitment\u003c\/li\u003e\n\u003cli\u003eBare steel finish — ready for weld-in installation, seam sealing, epoxy primer, and paint\u003c\/li\u003e\n\u003cli\u003eEliminates the need to fabricate a repair section by hand or source hard-to-find used sheet metal\u003c\/li\u003e\n\u003cli\u003eManufactured by JP Group (Denmark), a long-established supplier of classic Porsche restoration sheet metal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart #: JP-1861-0\u003c\/li\u003e\n\u003cli\u003eMaterial: Stamped steel\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: Denmark\u003c\/li\u003e\n\u003cli\u003eCondition: New, aftermarket reproduction\u003c\/li\u003e\n\u003cli\u003eApproximate shipping dimensions: 40 x 12 x 5 in (L x W x H), 11 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this panel made from?\u003c\/strong\u003e\u003cbr\u003eStamped steel, supplied bare and ready for weld-in installation, seam sealing, and paint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Porsche part or an aftermarket reproduction?\u003c\/strong\u003e\u003cbr\u003eThis is an aftermarket reproduction manufactured by JP Group of Denmark, built to match the factory panel's fit and profile — it is not a genuine Porsche OEM part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it require welding to install?\u003c\/strong\u003e\u003cbr\u003eYes. This is a weld-in restoration panel intended for installation by a qualified body shop or experienced fabricator using standard MIG or spot-welding techniques.\u003c\/p\u003e\u003cp class=\"prop65-warning\"\u003e\u003cstrong\u003e⚠ WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"JP GROUP","offers":[{"title":"Default Title","offer_id":45064389853299,"sku":"JP-1861-0","price":394.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/JP-1861-0-FRO.jpg?v=1780467955"},{"product_id":"firewall-cross-panel-porsche-911-912-jp-1864-0","title":"Firewall Cross Panel — Porsche 911 \/ 912 (JP-1864-0)","description":"\u003cp\u003eStop rust in its tracks. This JP Group firewall cross panel is a direct, weld-in replacement for the Porsche 911\/912's original steel panel — built to the factory profile so your restoration or rust-repair goes back together the way it left the factory.\u003c\/p\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1965–1973 Porsche 911; 1965–1969 Porsche 912\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStamped from steel to match the original factory panel profile for accurate, weld-in fitment\u003c\/li\u003e\n\u003cli\u003eBare steel finish — ready for weld-in installation, seam sealing, epoxy primer, and paint\u003c\/li\u003e\n\u003cli\u003eEliminates the need to fabricate a repair section by hand or source hard-to-find used sheet metal\u003c\/li\u003e\n\u003cli\u003eManufactured by JP Group (Denmark), a long-established supplier of classic Porsche restoration sheet metal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart #: JP-1864-0\u003c\/li\u003e\n\u003cli\u003eMaterial: Stamped steel\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: Denmark\u003c\/li\u003e\n\u003cli\u003eCondition: New, aftermarket reproduction\u003c\/li\u003e\n\u003cli\u003eApproximate shipping dimensions: 44 x 20 x 6 in (L x W x H), 17 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this panel made from?\u003c\/strong\u003e\u003cbr\u003eStamped steel, supplied bare and ready for weld-in installation, seam sealing, and paint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Porsche part or an aftermarket reproduction?\u003c\/strong\u003e\u003cbr\u003eThis is an aftermarket reproduction manufactured by JP Group of Denmark, built to match the factory panel's fit and profile — it is not a genuine Porsche OEM part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it require welding to install?\u003c\/strong\u003e\u003cbr\u003eYes. This is a weld-in restoration panel intended for installation by a qualified body shop or experienced fabricator using standard MIG or spot-welding techniques.\u003c\/p\u003e\u003cp class=\"prop65-warning\"\u003e\u003cstrong\u003e⚠ WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"JP GROUP","offers":[{"title":"Default Title","offer_id":45064389886067,"sku":"JP-1864-0","price":829.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/JP-1864-0-FRO.jpg?v=1780467959"},{"product_id":"rocker-panel-right-porsche-911-912-jp-1898-0","title":"Rocker Panel, Right — Porsche 911 \/ 912 (JP-1898-0)","description":"\u003cp\u003eStop rust in its tracks. This JP Group right rocker panel is a direct, weld-in replacement for the Porsche 911\/912's original steel panel — built to the factory profile so your restoration or rust-repair goes back together the way it left the factory.\u003c\/p\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1965–1973 Porsche 911; 1965–1969 Porsche 912\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStamped from steel to match the original factory panel profile for accurate, weld-in fitment\u003c\/li\u003e\n\u003cli\u003eBare steel finish — ready for weld-in installation, seam sealing, epoxy primer, and paint\u003c\/li\u003e\n\u003cli\u003eEliminates the need to fabricate a repair section by hand or source hard-to-find used sheet metal\u003c\/li\u003e\n\u003cli\u003eManufactured by JP Group (Denmark), a long-established supplier of classic Porsche restoration sheet metal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart #: JP-1898-0 · Interchange\/OEM ref: 1681000580\u003c\/li\u003e\n\u003cli\u003eMaterial: Stamped steel\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: Denmark\u003c\/li\u003e\n\u003cli\u003eCondition: New, aftermarket reproduction\u003c\/li\u003e\n\u003cli\u003eApproximate shipping dimensions: 40 x 10 x 4 in (L x W x H), 3 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this panel made from?\u003c\/strong\u003e\u003cbr\u003eStamped steel, supplied bare and ready for weld-in installation, seam sealing, and paint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Porsche part or an aftermarket reproduction?\u003c\/strong\u003e\u003cbr\u003eThis is an aftermarket reproduction manufactured by JP Group of Denmark, built to match the factory panel's fit and profile — it is not a genuine Porsche OEM part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it require welding to install?\u003c\/strong\u003e\u003cbr\u003eYes. This is a weld-in restoration panel intended for installation by a qualified body shop or experienced fabricator using standard MIG or spot-welding techniques.\u003c\/p\u003e\u003cp class=\"prop65-warning\"\u003e\u003cstrong\u003e⚠ WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"JP GROUP","offers":[{"title":"Default Title","offer_id":45064389918835,"sku":"JP-1898-0","price":46.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/1681000580.jpg?v=1780467967"},{"product_id":"rocker-panel-left-porsche-911-912-jp-1902-0","title":"Rocker Panel, Left — Porsche 911 \/ 912 (JP-1902-0)","description":"\u003cp\u003eStop rust in its tracks. This JP Group left rocker panel is a direct, weld-in replacement for the Porsche 911\/912's original steel panel — built to the factory profile so your restoration or rust-repair goes back together the way it left the factory.\u003c\/p\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1965–1973 Porsche 911; 1965–1969 Porsche 912\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStamped from steel to match the original factory panel profile for accurate, weld-in fitment\u003c\/li\u003e\n\u003cli\u003eBare steel finish — ready for weld-in installation, seam sealing, epoxy primer, and paint\u003c\/li\u003e\n\u003cli\u003eEliminates the need to fabricate a repair section by hand or source hard-to-find used sheet metal\u003c\/li\u003e\n\u003cli\u003eManufactured by JP Group (Denmark), a long-established supplier of classic Porsche restoration sheet metal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart #: JP-1902-0 · Interchange\/OEM ref: 1681000970\u003c\/li\u003e\n\u003cli\u003eMaterial: Stamped steel\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: Denmark\u003c\/li\u003e\n\u003cli\u003eCondition: New, aftermarket reproduction\u003c\/li\u003e\n\u003cli\u003eApproximate shipping dimensions: 44 x 10 x 4 in (L x W x H), 4 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this panel made from?\u003c\/strong\u003e\u003cbr\u003eStamped steel, supplied bare and ready for weld-in installation, seam sealing, and paint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Porsche part or an aftermarket reproduction?\u003c\/strong\u003e\u003cbr\u003eThis is an aftermarket reproduction manufactured by JP Group of Denmark, built to match the factory panel's fit and profile — it is not a genuine Porsche OEM part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it require welding to install?\u003c\/strong\u003e\u003cbr\u003eYes. This is a weld-in restoration panel intended for installation by a qualified body shop or experienced fabricator using standard MIG or spot-welding techniques.\u003c\/p\u003e\u003cp class=\"prop65-warning\"\u003e\u003cstrong\u003e⚠ WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"JP GROUP","offers":[{"title":"Default Title","offer_id":45064389951603,"sku":"JP-1902-0","price":44.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/JP-1902-0.jpg?v=1780467972"},{"product_id":"rocker-panel-left-full-porsche-911-912-jp-1904-0","title":"Rocker Panel, Left (Full) — Porsche 911 \/ 912 (JP-1904-0)","description":"\u003cp\u003eStop rust in its tracks. This JP Group full-length left rocker panel is a direct, weld-in replacement for the Porsche 911\/912's original steel panel — built to the factory profile so your restoration or rust-repair goes back together the way it left the factory.\u003c\/p\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1965–1973 Porsche 911; 1965–1969 Porsche 912\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStamped from steel to match the original factory panel profile for accurate, weld-in fitment\u003c\/li\u003e\n\u003cli\u003eBare steel finish — ready for weld-in installation, seam sealing, epoxy primer, and paint\u003c\/li\u003e\n\u003cli\u003eEliminates the need to fabricate a repair section by hand or source hard-to-find used sheet metal\u003c\/li\u003e\n\u003cli\u003eManufactured by JP Group (Denmark), a long-established supplier of classic Porsche restoration sheet metal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart #: JP-1904-0 · Interchange\/OEM ref: 1681001670\u003c\/li\u003e\n\u003cli\u003eMaterial: Stamped steel\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: Denmark\u003c\/li\u003e\n\u003cli\u003eCondition: New, aftermarket reproduction\u003c\/li\u003e\n\u003cli\u003eApproximate shipping dimensions: 60 x 12 x 5 in (L x W x H), 6 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this panel made from?\u003c\/strong\u003e\u003cbr\u003eStamped steel, supplied bare and ready for weld-in installation, seam sealing, and paint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Porsche part or an aftermarket reproduction?\u003c\/strong\u003e\u003cbr\u003eThis is an aftermarket reproduction manufactured by JP Group of Denmark, built to match the factory panel's fit and profile — it is not a genuine Porsche OEM part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it require welding to install?\u003c\/strong\u003e\u003cbr\u003eYes. This is a weld-in restoration panel intended for installation by a qualified body shop or experienced fabricator using standard MIG or spot-welding techniques.\u003c\/p\u003e\u003cp class=\"prop65-warning\"\u003e\u003cstrong\u003e⚠ WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"JP GROUP","offers":[{"title":"Default Title","offer_id":45064389984371,"sku":"JP-1904-0","price":184.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/JP-1904-0.jpg?v=1780467975"},{"product_id":"rocker-panel-right-full-porsche-911-912-jp-1905-0","title":"Rocker Panel, Right (Full) — Porsche 911 \/ 912 (JP-1905-0)","description":"\u003cp\u003eStop rust in its tracks. This JP Group full-length right rocker panel is a direct, weld-in replacement for the Porsche 911\/912's original steel panel — built to the factory profile so your restoration or rust-repair goes back together the way it left the factory.\u003c\/p\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1965–1973 Porsche 911; 1965–1969 Porsche 912\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStamped from steel to match the original factory panel profile for accurate, weld-in fitment\u003c\/li\u003e\n\u003cli\u003eBare steel finish — ready for weld-in installation, seam sealing, epoxy primer, and paint\u003c\/li\u003e\n\u003cli\u003eEliminates the need to fabricate a repair section by hand or source hard-to-find used sheet metal\u003c\/li\u003e\n\u003cli\u003eManufactured by JP Group (Denmark), a long-established supplier of classic Porsche restoration sheet metal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart #: JP-1905-0 · Interchange\/OEM ref: 1681001680\u003c\/li\u003e\n\u003cli\u003eMaterial: Stamped steel\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: Denmark\u003c\/li\u003e\n\u003cli\u003eCondition: New, aftermarket reproduction\u003c\/li\u003e\n\u003cli\u003eApproximate shipping dimensions: 60 x 12 x 5 in (L x W x H), 6 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this panel made from?\u003c\/strong\u003e\u003cbr\u003eStamped steel, supplied bare and ready for weld-in installation, seam sealing, and paint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Porsche part or an aftermarket reproduction?\u003c\/strong\u003e\u003cbr\u003eThis is an aftermarket reproduction manufactured by JP Group of Denmark, built to match the factory panel's fit and profile — it is not a genuine Porsche OEM part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it require welding to install?\u003c\/strong\u003e\u003cbr\u003eYes. This is a weld-in restoration panel intended for installation by a qualified body shop or experienced fabricator using standard MIG or spot-welding techniques.\u003c\/p\u003e\u003cp class=\"prop65-warning\"\u003e\u003cstrong\u003e⚠ WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"JP GROUP","offers":[{"title":"Default Title","offer_id":45064390017139,"sku":"JP-1905-0","price":184.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/JP-1905-0.jpg?v=1780467979"},{"product_id":"a-pillar-left-porsche-911-912-jp-1921-0","title":"A-Pillar, Left — Porsche 911 \/ 912 (JP-1921-0)","description":"\u003cp\u003eStop rust in its tracks. This JP Group left A-pillar panel is a direct, weld-in replacement for the Porsche 911\/912's original steel panel — built to the factory profile so your restoration or rust-repair goes back together the way it left the factory.\u003c\/p\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1965–1973 Porsche 911; 1965–1969 Porsche 912\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStamped from steel to match the original factory panel profile for accurate, weld-in fitment\u003c\/li\u003e\n\u003cli\u003eBare steel finish — ready for weld-in installation, seam sealing, epoxy primer, and paint\u003c\/li\u003e\n\u003cli\u003eEliminates the need to fabricate a repair section by hand or source hard-to-find used sheet metal\u003c\/li\u003e\n\u003cli\u003eManufactured by JP Group (Denmark), a long-established supplier of classic Porsche restoration sheet metal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart #: JP-1921-0 · Interchange\/OEM ref: 1681900570\u003c\/li\u003e\n\u003cli\u003eMaterial: Stamped steel\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: Denmark\u003c\/li\u003e\n\u003cli\u003eCondition: New, aftermarket reproduction\u003c\/li\u003e\n\u003cli\u003eApproximate shipping dimensions: 40 x 14 x 5 in (L x W x H), 7 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this panel made from?\u003c\/strong\u003e\u003cbr\u003eStamped steel, supplied bare and ready for weld-in installation, seam sealing, and paint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Porsche part or an aftermarket reproduction?\u003c\/strong\u003e\u003cbr\u003eThis is an aftermarket reproduction manufactured by JP Group of Denmark, built to match the factory panel's fit and profile — it is not a genuine Porsche OEM part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it require welding to install?\u003c\/strong\u003e\u003cbr\u003eYes. This is a weld-in restoration panel intended for installation by a qualified body shop or experienced fabricator using standard MIG or spot-welding techniques.\u003c\/p\u003e\u003cp class=\"prop65-warning\"\u003e\u003cstrong\u003e⚠ WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"JP GROUP","offers":[{"title":"Default Title","offer_id":45064390049907,"sku":"JP-1921-0","price":64.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/JP-1921-0.jpg?v=1780467984"},{"product_id":"a-pillar-right-porsche-911-912-jp-1922-0","title":"A-Pillar, Right — Porsche 911 \/ 912 (JP-1922-0)","description":"\u003cp\u003eStop rust in its tracks. This JP Group right A-pillar panel is a direct, weld-in replacement for the Porsche 911\/912's original steel panel — built to the factory profile so your restoration or rust-repair goes back together the way it left the factory.\u003c\/p\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1965–1973 Porsche 911; 1965–1969 Porsche 912\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStamped from steel to match the original factory panel profile for accurate, weld-in fitment\u003c\/li\u003e\n\u003cli\u003eBare steel finish — ready for weld-in installation, seam sealing, epoxy primer, and paint\u003c\/li\u003e\n\u003cli\u003eEliminates the need to fabricate a repair section by hand or source hard-to-find used sheet metal\u003c\/li\u003e\n\u003cli\u003eManufactured by JP Group (Denmark), a long-established supplier of classic Porsche restoration sheet metal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart #: JP-1922-0 · Interchange\/OEM ref: 1681900580\u003c\/li\u003e\n\u003cli\u003eMaterial: Stamped steel\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: Denmark\u003c\/li\u003e\n\u003cli\u003eCondition: New, aftermarket reproduction\u003c\/li\u003e\n\u003cli\u003eApproximate shipping dimensions: 40 x 14 x 5 in (L x W x H), 7 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this panel made from?\u003c\/strong\u003e\u003cbr\u003eStamped steel, supplied bare and ready for weld-in installation, seam sealing, and paint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Porsche part or an aftermarket reproduction?\u003c\/strong\u003e\u003cbr\u003eThis is an aftermarket reproduction manufactured by JP Group of Denmark, built to match the factory panel's fit and profile — it is not a genuine Porsche OEM part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it require welding to install?\u003c\/strong\u003e\u003cbr\u003eYes. This is a weld-in restoration panel intended for installation by a qualified body shop or experienced fabricator using standard MIG or spot-welding techniques.\u003c\/p\u003e\u003cp class=\"prop65-warning\"\u003e\u003cstrong\u003e⚠ WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"JP GROUP","offers":[{"title":"Default Title","offer_id":45064390082675,"sku":"JP-1922-0","price":64.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/JP-1922-0.jpg?v=1780468070"},{"product_id":"roof-panel-porsche-911-912-jp-1940-0","title":"Roof Panel — Porsche 911 \/ 912 (JP-1940-0)","description":"\u003cp\u003eStop rust in its tracks. This JP Group full roof panel is a direct, weld-in replacement for the Porsche 911\/912's original steel panel — built to the factory profile so your restoration or rust-repair goes back together the way it left the factory.\u003c\/p\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1965–1973 Porsche 911; 1965–1969 Porsche 912\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStamped from steel to match the original factory panel profile for accurate, weld-in fitment\u003c\/li\u003e\n\u003cli\u003eBare steel finish — ready for weld-in installation, seam sealing, epoxy primer, and paint\u003c\/li\u003e\n\u003cli\u003eEliminates the need to fabricate a repair section by hand or source hard-to-find used sheet metal\u003c\/li\u003e\n\u003cli\u003eManufactured by JP Group (Denmark), a long-established supplier of classic Porsche restoration sheet metal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart #: JP-1940-0 · Interchange\/OEM ref: 1682001000\u003c\/li\u003e\n\u003cli\u003eMaterial: Stamped steel\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: Denmark\u003c\/li\u003e\n\u003cli\u003eCondition: New, aftermarket reproduction\u003c\/li\u003e\n\u003cli\u003eApproximate shipping dimensions: 60 x 52 x 10 in (L x W x H), 45 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this panel made from?\u003c\/strong\u003e\u003cbr\u003eStamped steel, supplied bare and ready for weld-in installation, seam sealing, and paint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Porsche part or an aftermarket reproduction?\u003c\/strong\u003e\u003cbr\u003eThis is an aftermarket reproduction manufactured by JP Group of Denmark, built to match the factory panel's fit and profile — it is not a genuine Porsche OEM part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it require welding to install?\u003c\/strong\u003e\u003cbr\u003eYes. This is a weld-in restoration panel intended for installation by a qualified body shop or experienced fabricator using standard MIG or spot-welding techniques.\u003c\/p\u003e\u003cp class=\"prop65-warning\"\u003e\u003cstrong\u003e⚠ WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"JP GROUP","offers":[{"title":"Default Title","offer_id":45064390115443,"sku":"JP-1940-0","price":3279.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/1682001000-scaled.jpg?v=1780468074"},{"product_id":"door-left-porsche-911-912-jp-1883-0","title":"Door, Left — Porsche 911 \/ 912 (JP-1883-0)","description":"\u003cp\u003eStop rust in its tracks. This JP Group left door shell is a direct, weld-in replacement for the Porsche 911\/912's original steel panel — built to the factory profile so your restoration or rust-repair goes back together the way it left the factory.\u003c\/p\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1965–1973 Porsche 911; 1965–1969 Porsche 912\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStamped from steel to match the original factory panel profile for accurate, weld-in fitment\u003c\/li\u003e\n\u003cli\u003eBare steel finish — ready for weld-in installation, seam sealing, epoxy primer, and paint\u003c\/li\u003e\n\u003cli\u003eEliminates the need to fabricate a repair section by hand or source hard-to-find used sheet metal\u003c\/li\u003e\n\u003cli\u003eManufactured by JP Group (Denmark), a long-established supplier of classic Porsche restoration sheet metal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart #: JP-1883-0 · Interchange\/OEM ref: 1680700370\u003c\/li\u003e\n\u003cli\u003eMaterial: Stamped steel\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: Denmark\u003c\/li\u003e\n\u003cli\u003eCondition: New, aftermarket reproduction\u003c\/li\u003e\n\u003cli\u003eApproximate shipping dimensions: 50 x 40 x 10 in (L x W x H), 42 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this panel made from?\u003c\/strong\u003e\u003cbr\u003eStamped steel, supplied bare and ready for weld-in installation, seam sealing, and paint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Porsche part or an aftermarket reproduction?\u003c\/strong\u003e\u003cbr\u003eThis is an aftermarket reproduction manufactured by JP Group of Denmark, built to match the factory panel's fit and profile — it is not a genuine Porsche OEM part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it require welding to install?\u003c\/strong\u003e\u003cbr\u003eYes. This is a weld-in restoration panel intended for installation by a qualified body shop or experienced fabricator using standard MIG or spot-welding techniques.\u003c\/p\u003e\u003cp class=\"prop65-warning\"\u003e\u003cstrong\u003e⚠ WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"JP GROUP","offers":[{"title":"Default Title","offer_id":45064390180979,"sku":"JP-1883-0","price":3099.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/JP-1883-0.jpg?v=1780468079"},{"product_id":"door-right-porsche-911-912-jp-1884-0","title":"Door, Right — Porsche 911 \/ 912 (JP-1884-0)","description":"\u003cp\u003eStop rust in its tracks. This JP Group right door shell is a direct, weld-in replacement for the Porsche 911\/912's original steel panel — built to the factory profile so your restoration or rust-repair goes back together the way it left the factory.\u003c\/p\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1965–1973 Porsche 911; 1965–1969 Porsche 912\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStamped from steel to match the original factory panel profile for accurate, weld-in fitment\u003c\/li\u003e\n\u003cli\u003eBare steel finish — ready for weld-in installation, seam sealing, epoxy primer, and paint\u003c\/li\u003e\n\u003cli\u003eEliminates the need to fabricate a repair section by hand or source hard-to-find used sheet metal\u003c\/li\u003e\n\u003cli\u003eManufactured by JP Group (Denmark), a long-established supplier of classic Porsche restoration sheet metal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart #: JP-1884-0 · Interchange\/OEM ref: 1680700380\u003c\/li\u003e\n\u003cli\u003eMaterial: Stamped steel\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: Denmark\u003c\/li\u003e\n\u003cli\u003eCondition: New, aftermarket reproduction\u003c\/li\u003e\n\u003cli\u003eApproximate shipping dimensions: 50 x 40 x 10 in (L x W x H), 42 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this panel made from?\u003c\/strong\u003e\u003cbr\u003eStamped steel, supplied bare and ready for weld-in installation, seam sealing, and paint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Porsche part or an aftermarket reproduction?\u003c\/strong\u003e\u003cbr\u003eThis is an aftermarket reproduction manufactured by JP Group of Denmark, built to match the factory panel's fit and profile — it is not a genuine Porsche OEM part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it require welding to install?\u003c\/strong\u003e\u003cbr\u003eYes. This is a weld-in restoration panel intended for installation by a qualified body shop or experienced fabricator using standard MIG or spot-welding techniques.\u003c\/p\u003e\u003cp class=\"prop65-warning\"\u003e\u003cstrong\u003e⚠ WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"JP GROUP","offers":[{"title":"Default Title","offer_id":45064390279283,"sku":"JP-1884-0","price":3099.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/JP-1884-0.jpg?v=1780468083"},{"product_id":"door-right-porsche-911-912-jp-1885-0","title":"Door, Right — Porsche 911 \/ 912 (JP-1885-0)","description":"\u003cp\u003eStop rust in its tracks. This JP Group right door shell is a direct, weld-in replacement for the Porsche 911\/912's original steel panel — built to the factory profile so your restoration or rust-repair goes back together the way it left the factory.\u003c\/p\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1965–1973 Porsche 911; 1965–1969 Porsche 912\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStamped from steel to match the original factory panel profile for accurate, weld-in fitment\u003c\/li\u003e\n\u003cli\u003eBare steel finish — ready for weld-in installation, seam sealing, epoxy primer, and paint\u003c\/li\u003e\n\u003cli\u003eEliminates the need to fabricate a repair section by hand or source hard-to-find used sheet metal\u003c\/li\u003e\n\u003cli\u003eManufactured by JP Group (Denmark), a long-established supplier of classic Porsche restoration sheet metal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart #: JP-1885-0 · Interchange\/OEM ref: 1680700480\u003c\/li\u003e\n\u003cli\u003eMaterial: Stamped steel\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: Denmark\u003c\/li\u003e\n\u003cli\u003eCondition: New, aftermarket reproduction\u003c\/li\u003e\n\u003cli\u003eApproximate shipping dimensions: 50 x 40 x 10 in (L x W x H), 40 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this panel made from?\u003c\/strong\u003e\u003cbr\u003eStamped steel, supplied bare and ready for weld-in installation, seam sealing, and paint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Porsche part or an aftermarket reproduction?\u003c\/strong\u003e\u003cbr\u003eThis is an aftermarket reproduction manufactured by JP Group of Denmark, built to match the factory panel's fit and profile — it is not a genuine Porsche OEM part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it require welding to install?\u003c\/strong\u003e\u003cbr\u003eYes. This is a weld-in restoration panel intended for installation by a qualified body shop or experienced fabricator using standard MIG or spot-welding techniques.\u003c\/p\u003e\u003cp class=\"prop65-warning\"\u003e\u003cstrong\u003e⚠ WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"JP GROUP","offers":[{"title":"Default Title","offer_id":45064390312051,"sku":"JP-1885-0","price":3099.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/JP-1885-0.jpg?v=1780468087"},{"product_id":"door-left-porsche-911-912-jp-1886-0","title":"Door, Left — Porsche 911 \/ 912 (JP-1886-0)","description":"\u003cp\u003eStop rust in its tracks. This JP Group left door shell is a direct, weld-in replacement for the Porsche 911\/912's original steel panel — built to the factory profile so your restoration or rust-repair goes back together the way it left the factory.\u003c\/p\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1965–1973 Porsche 911; 1965–1969 Porsche 912\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStamped from steel to match the original factory panel profile for accurate, weld-in fitment\u003c\/li\u003e\n\u003cli\u003eBare steel finish — ready for weld-in installation, seam sealing, epoxy primer, and paint\u003c\/li\u003e\n\u003cli\u003eEliminates the need to fabricate a repair section by hand or source hard-to-find used sheet metal\u003c\/li\u003e\n\u003cli\u003eManufactured by JP Group (Denmark), a long-established supplier of classic Porsche restoration sheet metal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart #: JP-1886-0 · Interchange\/OEM ref: 1680700570\u003c\/li\u003e\n\u003cli\u003eMaterial: Stamped steel\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: Denmark\u003c\/li\u003e\n\u003cli\u003eCondition: New, aftermarket reproduction\u003c\/li\u003e\n\u003cli\u003eApproximate shipping dimensions: 52 x 42 x 12 in (L x W x H), 48 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this panel made from?\u003c\/strong\u003e\u003cbr\u003eStamped steel, supplied bare and ready for weld-in installation, seam sealing, and paint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Porsche part or an aftermarket reproduction?\u003c\/strong\u003e\u003cbr\u003eThis is an aftermarket reproduction manufactured by JP Group of Denmark, built to match the factory panel's fit and profile — it is not a genuine Porsche OEM part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it require welding to install?\u003c\/strong\u003e\u003cbr\u003eYes. This is a weld-in restoration panel intended for installation by a qualified body shop or experienced fabricator using standard MIG or spot-welding techniques.\u003c\/p\u003e\u003cp class=\"prop65-warning\"\u003e\u003cstrong\u003e⚠ WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"JP GROUP","offers":[{"title":"Default Title","offer_id":45064390344819,"sku":"JP-1886-0","price":2569.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/JP-1886-0.jpg?v=1780468091"},{"product_id":"door-right-porsche-911-912-jp-1887-1","title":"Door, Right — Porsche 911 \/ 912 (JP-1887-0)","description":"\u003cp\u003eStop rust in its tracks. This JP Group right door shell is a direct, weld-in replacement for the Porsche 911\/912's original steel panel — built to the factory profile so your restoration or rust-repair goes back together the way it left the factory.\u003c\/p\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1965–1973 Porsche 911; 1965–1969 Porsche 912\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStamped from steel to match the original factory panel profile for accurate, weld-in fitment\u003c\/li\u003e\n\u003cli\u003eBare steel finish — ready for weld-in installation, seam sealing, epoxy primer, and paint\u003c\/li\u003e\n\u003cli\u003eEliminates the need to fabricate a repair section by hand or source hard-to-find used sheet metal\u003c\/li\u003e\n\u003cli\u003eManufactured by JP Group (Denmark), a long-established supplier of classic Porsche restoration sheet metal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart #: JP-1887-0 · Interchange\/OEM ref: 1680700580\u003c\/li\u003e\n\u003cli\u003eMaterial: Stamped steel\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: Denmark\u003c\/li\u003e\n\u003cli\u003eCondition: New, aftermarket reproduction\u003c\/li\u003e\n\u003cli\u003eApproximate shipping dimensions: 52 x 42 x 12 in (L x W x H), 48 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this panel made from?\u003c\/strong\u003e\u003cbr\u003eStamped steel, supplied bare and ready for weld-in installation, seam sealing, and paint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Porsche part or an aftermarket reproduction?\u003c\/strong\u003e\u003cbr\u003eThis is an aftermarket reproduction manufactured by JP Group of Denmark, built to match the factory panel's fit and profile — it is not a genuine Porsche OEM part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it require welding to install?\u003c\/strong\u003e\u003cbr\u003eYes. This is a weld-in restoration panel intended for installation by a qualified body shop or experienced fabricator using standard MIG or spot-welding techniques.\u003c\/p\u003e\u003cp class=\"prop65-warning\"\u003e\u003cstrong\u003e⚠ WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"JP GROUP","offers":[{"title":"Default Title","offer_id":45064390770803,"sku":"JP-1887-0","price":2019.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/JP-1887-0.jpg?v=1780468095"},{"product_id":"door-panel-left-partial-porsche-911-912-jp-1891-0","title":"Door Panel, Left (Partial) — Porsche 911 \/ 912 (JP-1891-0)","description":"\u003cp\u003eStop rust in its tracks. This JP Group partial left door skin panel is a direct, weld-in replacement for the Porsche 911\/912's original steel panel — built to the factory profile so your restoration or rust-repair goes back together the way it left the factory.\u003c\/p\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1965–1973 Porsche 911; 1965–1969 Porsche 912\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStamped from steel to match the original factory panel profile for accurate, weld-in fitment\u003c\/li\u003e\n\u003cli\u003eBare steel finish — ready for weld-in installation, seam sealing, epoxy primer, and paint\u003c\/li\u003e\n\u003cli\u003eEliminates the need to fabricate a repair section by hand or source hard-to-find used sheet metal\u003c\/li\u003e\n\u003cli\u003eManufactured by JP Group (Denmark), a long-established supplier of classic Porsche restoration sheet metal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart #: JP-1891-0 · Interchange\/OEM ref: 1680900270\u003c\/li\u003e\n\u003cli\u003eMaterial: Stamped steel\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: Denmark\u003c\/li\u003e\n\u003cli\u003eCondition: New, aftermarket reproduction\u003c\/li\u003e\n\u003cli\u003eApproximate shipping dimensions: 30 x 16 x 5 in (L x W x H), 6 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this panel made from?\u003c\/strong\u003e\u003cbr\u003eStamped steel, supplied bare and ready for weld-in installation, seam sealing, and paint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Porsche part or an aftermarket reproduction?\u003c\/strong\u003e\u003cbr\u003eThis is an aftermarket reproduction manufactured by JP Group of Denmark, built to match the factory panel's fit and profile — it is not a genuine Porsche OEM part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it require welding to install?\u003c\/strong\u003e\u003cbr\u003eYes. This is a weld-in restoration panel intended for installation by a qualified body shop or experienced fabricator using standard MIG or spot-welding techniques.\u003c\/p\u003e\u003cp class=\"prop65-warning\"\u003e\u003cstrong\u003e⚠ WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"JP GROUP","offers":[{"title":"Default Title","offer_id":45064390803571,"sku":"JP-1891-0","price":159.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/1680900270-scaled.jpg?v=1780468100"},{"product_id":"door-panel-right-partial-porsche-911-912-jp-1892-0","title":"Door Panel, Right (Partial) — Porsche 911 \/ 912 (JP-1892-0)","description":"\u003cp\u003eStop rust in its tracks. This JP Group partial right door skin panel is a direct, weld-in replacement for the Porsche 911\/912's original steel panel — built to the factory profile so your restoration or rust-repair goes back together the way it left the factory.\u003c\/p\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1965–1973 Porsche 911; 1965–1969 Porsche 912\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStamped from steel to match the original factory panel profile for accurate, weld-in fitment\u003c\/li\u003e\n\u003cli\u003eBare steel finish — ready for weld-in installation, seam sealing, epoxy primer, and paint\u003c\/li\u003e\n\u003cli\u003eEliminates the need to fabricate a repair section by hand or source hard-to-find used sheet metal\u003c\/li\u003e\n\u003cli\u003eManufactured by JP Group (Denmark), a long-established supplier of classic Porsche restoration sheet metal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart #: JP-1892-0 · Interchange\/OEM ref: 1680900280\u003c\/li\u003e\n\u003cli\u003eMaterial: Stamped steel\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: Denmark\u003c\/li\u003e\n\u003cli\u003eCondition: New, aftermarket reproduction\u003c\/li\u003e\n\u003cli\u003eApproximate shipping dimensions: 24 x 14 x 4 in (L x W x H), 4 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this panel made from?\u003c\/strong\u003e\u003cbr\u003eStamped steel, supplied bare and ready for weld-in installation, seam sealing, and paint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Porsche part or an aftermarket reproduction?\u003c\/strong\u003e\u003cbr\u003eThis is an aftermarket reproduction manufactured by JP Group of Denmark, built to match the factory panel's fit and profile — it is not a genuine Porsche OEM part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it require welding to install?\u003c\/strong\u003e\u003cbr\u003eYes. This is a weld-in restoration panel intended for installation by a qualified body shop or experienced fabricator using standard MIG or spot-welding techniques.\u003c\/p\u003e\u003cp class=\"prop65-warning\"\u003e\u003cstrong\u003e⚠ WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"JP GROUP","offers":[{"title":"Default Title","offer_id":45064390869107,"sku":"JP-1892-0","price":144.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/1680900280-scaled.jpg?v=1780468104"},{"product_id":"door-panel-right-partial-porsche-911-912-jp-1896-0","title":"Door Panel, Right (Partial) — Porsche 911 \/ 912 (JP-1896-0)","description":"\u003cp\u003eStop rust in its tracks. This JP Group partial right door skin panel is a direct, weld-in replacement for the Porsche 911\/912's original steel panel — built to the factory profile so your restoration or rust-repair goes back together the way it left the factory.\u003c\/p\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1965–1973 Porsche 911; 1965–1969 Porsche 912\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStamped from steel to match the original factory panel profile for accurate, weld-in fitment\u003c\/li\u003e\n\u003cli\u003eBare steel finish — ready for weld-in installation, seam sealing, epoxy primer, and paint\u003c\/li\u003e\n\u003cli\u003eEliminates the need to fabricate a repair section by hand or source hard-to-find used sheet metal\u003c\/li\u003e\n\u003cli\u003eManufactured by JP Group (Denmark), a long-established supplier of classic Porsche restoration sheet metal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart #: JP-1896-0 · Interchange\/OEM ref: 1681000380\u003c\/li\u003e\n\u003cli\u003eMaterial: Stamped steel\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: Denmark\u003c\/li\u003e\n\u003cli\u003eCondition: New, aftermarket reproduction\u003c\/li\u003e\n\u003cli\u003eApproximate shipping dimensions: 24 x 14 x 4 in (L x W x H), 4 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this panel made from?\u003c\/strong\u003e\u003cbr\u003eStamped steel, supplied bare and ready for weld-in installation, seam sealing, and paint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Porsche part or an aftermarket reproduction?\u003c\/strong\u003e\u003cbr\u003eThis is an aftermarket reproduction manufactured by JP Group of Denmark, built to match the factory panel's fit and profile — it is not a genuine Porsche OEM part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it require welding to install?\u003c\/strong\u003e\u003cbr\u003eYes. This is a weld-in restoration panel intended for installation by a qualified body shop or experienced fabricator using standard MIG or spot-welding techniques.\u003c\/p\u003e\u003cp class=\"prop65-warning\"\u003e\u003cstrong\u003e⚠ WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"JP GROUP","offers":[{"title":"Default Title","offer_id":45064390934643,"sku":"JP-1896-0","price":94.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/1681000380-scaled.jpg?v=1780468108"},{"product_id":"door-panel-left-partial-porsche-911-912-jp-1899-0","title":"Door Panel, Left (Partial) — Porsche 911 \/ 912 (JP-1899-0)","description":"\u003cp\u003eStop rust in its tracks. This JP Group partial left door skin panel is a direct, weld-in replacement for the Porsche 911\/912's original steel panel — built to the factory profile so your restoration or rust-repair goes back together the way it left the factory.\u003c\/p\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1965–1973 Porsche 911; 1965–1969 Porsche 912\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStamped from steel to match the original factory panel profile for accurate, weld-in fitment\u003c\/li\u003e\n\u003cli\u003eBare steel finish — ready for weld-in installation, seam sealing, epoxy primer, and paint\u003c\/li\u003e\n\u003cli\u003eEliminates the need to fabricate a repair section by hand or source hard-to-find used sheet metal\u003c\/li\u003e\n\u003cli\u003eManufactured by JP Group (Denmark), a long-established supplier of classic Porsche restoration sheet metal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart #: JP-1899-0 · Interchange\/OEM ref: 1681000670\u003c\/li\u003e\n\u003cli\u003eMaterial: Stamped steel\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: Denmark\u003c\/li\u003e\n\u003cli\u003eCondition: New, aftermarket reproduction\u003c\/li\u003e\n\u003cli\u003eApproximate shipping dimensions: 30 x 16 x 5 in (L x W x H), 6 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this panel made from?\u003c\/strong\u003e\u003cbr\u003eStamped steel, supplied bare and ready for weld-in installation, seam sealing, and paint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Porsche part or an aftermarket reproduction?\u003c\/strong\u003e\u003cbr\u003eThis is an aftermarket reproduction manufactured by JP Group of Denmark, built to match the factory panel's fit and profile — it is not a genuine Porsche OEM part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it require welding to install?\u003c\/strong\u003e\u003cbr\u003eYes. This is a weld-in restoration panel intended for installation by a qualified body shop or experienced fabricator using standard MIG or spot-welding techniques.\u003c\/p\u003e\u003cp class=\"prop65-warning\"\u003e\u003cstrong\u003e⚠ WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"JP GROUP","offers":[{"title":"Default Title","offer_id":45064390967411,"sku":"JP-1899-0","price":149.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/JP-1899-0.jpg?v=1780468113"},{"product_id":"battery-repair-panel-porsche-911-912-jp-1962-0","title":"Battery Repair Panel — Porsche 911 \/ 912 (JP-1962-0)","description":"\u003cp\u003eStop rust in its tracks. This JP Group battery tray repair panel is a direct, weld-in replacement for the Porsche 911\/912's original steel panel — built to the factory profile so your restoration or rust-repair goes back together the way it left the factory.\u003c\/p\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1965–1973 Porsche 911; 1965–1969 Porsche 912\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStamped from steel to match the original factory panel profile for accurate, weld-in fitment\u003c\/li\u003e\n\u003cli\u003eBare steel finish — ready for weld-in installation, seam sealing, epoxy primer, and paint\u003c\/li\u003e\n\u003cli\u003eEliminates the need to fabricate a repair section by hand or source hard-to-find used sheet metal\u003c\/li\u003e\n\u003cli\u003eManufactured by JP Group (Denmark), a long-established supplier of classic Porsche restoration sheet metal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart #: JP-1962-0 · Interchange\/OEM ref: 1682700570 \/ 901-501-503-00\u003c\/li\u003e\n\u003cli\u003eMaterial: Stamped steel\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: Denmark\u003c\/li\u003e\n\u003cli\u003eCondition: New, aftermarket reproduction\u003c\/li\u003e\n\u003cli\u003eApproximate shipping dimensions: 30 x 18 x 5 in (L x W x H), 9 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this panel made from?\u003c\/strong\u003e\u003cbr\u003eStamped steel, supplied bare and ready for weld-in installation, seam sealing, and paint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Porsche part or an aftermarket reproduction?\u003c\/strong\u003e\u003cbr\u003eThis is an aftermarket reproduction manufactured by JP Group of Denmark, built to match the factory panel's fit and profile — it is not a genuine Porsche OEM part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it require welding to install?\u003c\/strong\u003e\u003cbr\u003eYes. This is a weld-in restoration panel intended for installation by a qualified body shop or experienced fabricator using standard MIG or spot-welding techniques.\u003c\/p\u003e\u003cp class=\"prop65-warning\"\u003e\u003cstrong\u003e⚠ WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"JP GROUP","offers":[{"title":"Default Title","offer_id":45064391000179,"sku":"JP-1962-0","price":204.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/JP-1962-0.jpg?v=1780468117"},{"product_id":"fuel-tank-support-with-battery-tray-porsche-911-912-jp-1960-0","title":"Fuel Tank Support with Battery Tray — Porsche 911 \/ 912 (JP-1960-0)","description":"\u003cp\u003eStop rust in its tracks. This JP Group fuel tank support panel with integrated battery tray is a direct, weld-in replacement for the Porsche 911\/912's original steel panel — built to the factory profile so your restoration or rust-repair goes back together the way it left the factory.\u003c\/p\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1965–1973 Porsche 911; 1965–1969 Porsche 912\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStamped from steel to match the original factory panel profile for accurate, weld-in fitment\u003c\/li\u003e\n\u003cli\u003eBare steel finish — ready for weld-in installation, seam sealing, epoxy primer, and paint\u003c\/li\u003e\n\u003cli\u003eEliminates the need to fabricate a repair section by hand or source hard-to-find used sheet metal\u003c\/li\u003e\n\u003cli\u003eManufactured by JP Group (Denmark), a long-established supplier of classic Porsche restoration sheet metal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart #: JP-1960-0 · Interchange\/OEM ref: 1682700300\u003c\/li\u003e\n\u003cli\u003eMaterial: Stamped steel\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: Denmark\u003c\/li\u003e\n\u003cli\u003eCondition: New, aftermarket reproduction\u003c\/li\u003e\n\u003cli\u003eApproximate shipping dimensions: 24 x 16 x 5 in (L x W x H), 6 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this panel made from?\u003c\/strong\u003e\u003cbr\u003eStamped steel, supplied bare and ready for weld-in installation, seam sealing, and paint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Porsche part or an aftermarket reproduction?\u003c\/strong\u003e\u003cbr\u003eThis is an aftermarket reproduction manufactured by JP Group of Denmark, built to match the factory panel's fit and profile — it is not a genuine Porsche OEM part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it require welding to install?\u003c\/strong\u003e\u003cbr\u003eYes. This is a weld-in restoration panel intended for installation by a qualified body shop or experienced fabricator using standard MIG or spot-welding techniques.\u003c\/p\u003e\u003cp class=\"prop65-warning\"\u003e\u003cstrong\u003e⚠ WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"JP GROUP","offers":[{"title":"Default Title","offer_id":45064391098483,"sku":"JP-1960-0","price":129.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/JP-1960-0.jpg?v=1780468121"},{"product_id":"wheelhouse-repair-panel-right-front-inner-porsche-911-912-930-jp-1952-0","title":"Wheelhouse Repair Panel, Right Front Inner — Porsche 911 \/ 912 \/ 930 (JP-1952-0)","description":"\u003cp\u003eStop rust in its tracks. This JP Group right front inner wheelhouse repair panel is a direct, weld-in replacement for the Porsche 911\/912\/930's original steel panel — built to the factory profile so your restoration or rust-repair goes back together the way it left the factory.\u003c\/p\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1965–1973 Porsche 911; 1965–1969 Porsche 912; 1975–1989 Porsche 930\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStamped from steel to match the original factory panel profile for accurate, weld-in fitment\u003c\/li\u003e\n\u003cli\u003eBare steel finish — ready for weld-in installation, seam sealing, epoxy primer, and paint\u003c\/li\u003e\n\u003cli\u003eEliminates the need to fabricate a repair section by hand or source hard-to-find used sheet metal\u003c\/li\u003e\n\u003cli\u003eManufactured by JP Group (Denmark), a long-established supplier of classic Porsche restoration sheet metal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart #: JP-1952-0\u003c\/li\u003e\n\u003cli\u003eMaterial: Stamped steel\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: Denmark\u003c\/li\u003e\n\u003cli\u003eCondition: New, aftermarket reproduction\u003c\/li\u003e\n\u003cli\u003eApproximate shipping dimensions: 26 x 18 x 5 in (L x W x H), 8 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this panel made from?\u003c\/strong\u003e\u003cbr\u003eStamped steel, supplied bare and ready for weld-in installation, seam sealing, and paint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Porsche part or an aftermarket reproduction?\u003c\/strong\u003e\u003cbr\u003eThis is an aftermarket reproduction manufactured by JP Group of Denmark, built to match the factory panel's fit and profile — it is not a genuine Porsche OEM part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it require welding to install?\u003c\/strong\u003e\u003cbr\u003eYes. This is a weld-in restoration panel intended for installation by a qualified body shop or experienced fabricator using standard MIG or spot-welding techniques.\u003c\/p\u003e\u003cp class=\"prop65-warning\"\u003e\u003cstrong\u003e⚠ WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"JP GROUP","offers":[{"title":"Default Title","offer_id":45064391131251,"sku":"JP-1952-0","price":254.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/JP-1952-0-FRO.jpg?v=1780468126"},{"product_id":"door-hinge-pillar-left-porsche-911-912-jp-1917-0","title":"Door Hinge Pillar, Left — Porsche 911 \/ 912 (JP-1917-0)","description":"\u003cp\u003eStop rust in its tracks. This JP Group left door hinge pillar section is a direct, weld-in replacement for the Porsche 911\/912's original steel panel — built to the factory profile so your restoration or rust-repair goes back together the way it left the factory.\u003c\/p\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1965–1973 Porsche 911; 1965–1969 Porsche 912\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStamped from steel to match the original factory panel profile for accurate, weld-in fitment\u003c\/li\u003e\n\u003cli\u003eBare steel finish — ready for weld-in installation, seam sealing, epoxy primer, and paint\u003c\/li\u003e\n\u003cli\u003eEliminates the need to fabricate a repair section by hand or source hard-to-find used sheet metal\u003c\/li\u003e\n\u003cli\u003eManufactured by JP Group (Denmark), a long-established supplier of classic Porsche restoration sheet metal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart #: JP-1917-0 · Interchange\/OEM ref: 1681900370\u003c\/li\u003e\n\u003cli\u003eMaterial: Stamped steel\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: Denmark\u003c\/li\u003e\n\u003cli\u003eCondition: New, aftermarket reproduction\u003c\/li\u003e\n\u003cli\u003eApproximate shipping dimensions: 30 x 14 x 5 in (L x W x H), 14 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this panel made from?\u003c\/strong\u003e\u003cbr\u003eStamped steel, supplied bare and ready for weld-in installation, seam sealing, and paint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Porsche part or an aftermarket reproduction?\u003c\/strong\u003e\u003cbr\u003eThis is an aftermarket reproduction manufactured by JP Group of Denmark, built to match the factory panel's fit and profile — it is not a genuine Porsche OEM part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it require welding to install?\u003c\/strong\u003e\u003cbr\u003eYes. This is a weld-in restoration panel intended for installation by a qualified body shop or experienced fabricator using standard MIG or spot-welding techniques.\u003c\/p\u003e\u003cp class=\"prop65-warning\"\u003e\u003cstrong\u003e⚠ WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"JP GROUP","offers":[{"title":"Default Title","offer_id":45064391229555,"sku":"JP-1917-0","price":649.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/JP-1917-0.jpg?v=1780468131"},{"product_id":"door-hinge-pillar-right-porsche-911-912-jp-1918-0","title":"Door Hinge Pillar, Right — Porsche 911 \/ 912 (JP-1918-0)","description":"\u003cp\u003eStop rust in its tracks. This JP Group right door hinge pillar section is a direct, weld-in replacement for the Porsche 911\/912's original steel panel — built to the factory profile so your restoration or rust-repair goes back together the way it left the factory.\u003c\/p\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1965–1973 Porsche 911; 1965–1969 Porsche 912\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStamped from steel to match the original factory panel profile for accurate, weld-in fitment\u003c\/li\u003e\n\u003cli\u003eBare steel finish — ready for weld-in installation, seam sealing, epoxy primer, and paint\u003c\/li\u003e\n\u003cli\u003eEliminates the need to fabricate a repair section by hand or source hard-to-find used sheet metal\u003c\/li\u003e\n\u003cli\u003eManufactured by JP Group (Denmark), a long-established supplier of classic Porsche restoration sheet metal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart #: JP-1918-0 · Interchange\/OEM ref: 1681900380\u003c\/li\u003e\n\u003cli\u003eMaterial: Stamped steel\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: Denmark\u003c\/li\u003e\n\u003cli\u003eCondition: New, aftermarket reproduction\u003c\/li\u003e\n\u003cli\u003eApproximate shipping dimensions: 30 x 14 x 5 in (L x W x H), 14 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this panel made from?\u003c\/strong\u003e\u003cbr\u003eStamped steel, supplied bare and ready for weld-in installation, seam sealing, and paint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a genuine Porsche part or an aftermarket reproduction?\u003c\/strong\u003e\u003cbr\u003eThis is an aftermarket reproduction manufactured by JP Group of Denmark, built to match the factory panel's fit and profile — it is not a genuine Porsche OEM part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it require welding to install?\u003c\/strong\u003e\u003cbr\u003eYes. This is a weld-in restoration panel intended for installation by a qualified body shop or experienced fabricator using standard MIG or spot-welding techniques.\u003c\/p\u003e\u003cp class=\"prop65-warning\"\u003e\u003cstrong\u003e⚠ WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"JP GROUP","offers":[{"title":"Default Title","offer_id":45064391295091,"sku":"JP-1918-0","price":649.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/1681900380-scaled.jpg?v=1780468135"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/collections\/1680200300-scaled.jpg?v=1780638282","url":"https:\/\/www.washburnsmetal.com\/collections\/porsche-911-912-body-panels.oembed?page=4","provider":"Washburn's Metal","version":"1.0","type":"link"}