{"title":"Pro Shop Tooling — Fixtures, Jigs, Templates \u0026 Handling","description":"\u003cp\u003e\u003cstrong\u003eThe tooling we built for our own shop floor, because buying it wasn't an option.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEverything in this collection exists because we needed it on a car that was already apart. Weld fixtures that hold a Split Bus windshield frame in the right place while you tack it. Magnetic templates that put turn signal holes, clock locations and framehead caster cuts exactly where the factory put them, on every car, without measuring twice. Reamers sized for the pins we sell. Rolling gear that lets one person move a bodyless pan across a shop.\u003c\/p\u003e\n\u003ch3\u003eWho this is for\u003c\/h3\u003e\n\u003cp\u003eIf you restore one car every few years, most of this is more tool than you need — buy the part and take your time. This page is for the person doing it repeatedly: a professional restoration shop, a fabricator taking in outside work, or a builder deep enough into air-cooled Volkswagens that the same job keeps coming back around.\u003c\/p\u003e\n\u003ch3\u003eThe math a shop cares about\u003c\/h3\u003e\n\u003cp\u003eA $65 weld jig that saves two hours of fitting and prevents one scrapped panel pays for itself before lunch on the first car. A $30 magnetic template turns a measure-mark-check-recheck sequence into a place-and-cut. Repeatability across cars is the whole point — the second Bus should take less time than the first, and the tenth should take less than the second.\u003c\/p\u003e\n\u003ch3\u003eMade where the parts are made\u003c\/h3\u003e\n\u003cp\u003eAll of it is designed, CNC-cut, machined and welded in-house at Washburn's Metal in Orange, California, on the same equipment that makes our parts. If you need a fixture for something we don't list, ask — we make one-offs for our own jobs constantly and can usually make yours.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShop or trade buyer?\u003c\/strong\u003e Ask us about trade pricing on the tooling line and on \u003ca href=\"\/collections\/washburn-originals\"\u003eWashburn's Originals\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"vw-bus-4-leg-rolling-transport-cart-kit-1955-1970","title":"Washburn's Metal 4-Leg Rolling Transport Kit | 1955-1970 VW Bus | Bolt-On, 6\" Steel Casters (T03)","description":"\u003ch2\u003e\u003cb\u003eWashburn's Metal 4-Leg Rolling Transport Kit — 1955–1970 VW Bus\u003c\/b\u003e\u003c\/h2\u003e\u003cp\u003eThe \u003cb\u003eWashburn's Metal 4-Leg Rolling Transport Kit\u003c\/b\u003e is the same setup we use under every split window Bus we build at the shop. Designed for \u003cb\u003e1955–1970 VW Buses\u003c\/b\u003e, it lets you safely roll a bodyless Bus pan around your garage or shop without a forklift or a second set of hands.\u003c\/p\u003e\u003cp\u003eThe kit includes four legs and all necessary hardware. The legs bolt to existing factory mounting points and are rated for the full weight of a VW Bus pan.\u003c\/p\u003e\u003ch3\u003e\u003cb\u003eVehicle Fitment\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\n\u003cb\u003eVW Type 2 Split Window Bus:\u003c\/b\u003e 1955–1970\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003e\u003cb\u003eWhy Choose Washburn's Metal?\u003c\/b\u003e\u003c\/h3\u003e\u003cp\u003eThis is shop-proven equipment — the exact rolling transport setup we rely on under every split window Bus we restore, built and finished in-house in \u003cb\u003eOrange, CA\u003c\/b\u003e.\u003c\/p\u003e\u003ch3\u003e\u003cb\u003eKey Features \u0026amp; Benefits\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eMove a bodyless pan solo:\u003c\/b\u003e Roll a Bus pan around your garage or shop without a forklift or a second set of hands.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBolt-on installation:\u003c\/b\u003e Legs bolt to existing factory mounting points.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFull-pan load rating:\u003c\/b\u003e Rated for the full weight of a VW Bus pan.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlexible configuration:\u003c\/b\u003e Available as weld-in or bolt-on depending on configuration.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eConfiguration:\u003c\/b\u003e Four-leg kit with hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCasters:\u003c\/b\u003e 6\" steel casters\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish:\u003c\/b\u003e Powder coated\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting:\u003c\/b\u003e Bolt-on to factory points (weld-in available)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMade In:\u003c\/b\u003e Orange, CA\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePart Number:\u003c\/b\u003e T03\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eHow do the legs attach?\u003c\/b\u003e The legs bolt to existing factory mounting points, and the kit is available as weld-in or bolt-on depending on configuration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHow much weight will it hold?\u003c\/b\u003e The kit is rated for the full weight of a VW Bus pan.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eIs local pickup available?\u003c\/b\u003e Yes — local pickup is available for assembled units.\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr\u003e\u003ch3\u003e\u003cb\u003eExplore Related Categories\u003c\/b\u003e\u003c\/h3\u003e\u003cp\u003e\u003ca href=\"\/collections\/restoration-tools\"\u003eRestoration Tools\u003c\/a\u003e, \u003ca href=\"\/collections\/vw-bus\"\u003eVW Bus\u003c\/a\u003e, \u003ca href=\"\/collections\/all-vw-aircooled\"\u003eAll VW Aircooled\u003c\/a\u003e\u003c\/p\u003e","brand":"Washburn's Metal","offers":[{"title":"Default Title","offer_id":31759326118003,"sku":"T03","price":650.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/IMG_20240808_145703.jpg?v=1723596389"},{"product_id":"vw-bus-rotisserie-kit-weld-it-yourself","title":"Washburn's VW Bus Rotisserie Kit | 1950-1967 Type 2 Split-Window | Weld-It-Yourself, CNC-Cut Steel (T05)","description":"\u003ch2\u003e\u003cb\u003eWashburn's VW Bus Rotisserie Kit — Weld-It-Yourself, 1950–1967 Type 2\u003c\/b\u003e\u003c\/h2\u003e\u003cp\u003eThe \u003cb\u003eWashburn's VW Bus Rotisserie Kit\u003c\/b\u003e is a weld-it-yourself kit designed to make \u003cb\u003efull 360° rotation\u003c\/b\u003e of your Bus body possible without breaking the bank on a commercial rotisserie. The kit includes all \u003cb\u003eCNC-cut steel components\u003c\/b\u003e needed to build one complete rotisserie.\u003c\/p\u003e\u003cp\u003eWelding is required for assembly, and wheels are not included.\u003c\/p\u003e\u003ch3\u003e\u003cb\u003eVehicle Fitment\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\n\u003cb\u003eVW Type 2 Bus:\u003c\/b\u003e 1950–1967 (split-window, standard body dimensions)\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003e\u003cb\u003eWhy Choose Washburn's Metal?\u003c\/b\u003e\u003c\/h3\u003e\u003cp\u003eThis kit gives you a shop-grade rotisserie at a fraction of the cost of a commercial unit — CNC-cut from steel by Washburn's Metal so the components fit together cleanly when you weld it up.\u003c\/p\u003e\u003ch3\u003e\u003cb\u003eKey Features \u0026amp; Benefits\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eFull 360° rotation:\u003c\/b\u003e Spin the Bus body for easier access during body and floor pan work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBudget-friendly:\u003c\/b\u003e Build your own rotisserie without paying commercial-unit prices.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eComplete CNC-cut kit:\u003c\/b\u003e Includes all CNC-cut steel components needed to build one complete rotisserie.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e Weld-it-yourself Bus rotisserie kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e CNC-cut steel components\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAssembly:\u003c\/b\u003e Welding required\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWheels:\u003c\/b\u003e Not included\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRotation:\u003c\/b\u003e Full 360°\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e Washburn's Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePart Number:\u003c\/b\u003e T05\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eDo I need to weld?\u003c\/b\u003e Yes, this is a weld-it-yourself kit; all CNC-cut steel components are included but assembly requires welding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAre wheels included?\u003c\/b\u003e No, wheels are not included in this kit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCan it rotate the body a full 360°?\u003c\/b\u003e Yes — that is the purpose of a rotisserie: full rotation for easier access during body and floor pan work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWhat years of Bus does it fit?\u003c\/b\u003e VW Type 2 Bus, 1950–1967, with standard body dimensions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr\u003e\u003ch3\u003e\u003cb\u003eExplore Related Categories\u003c\/b\u003e\u003c\/h3\u003e\u003cp\u003e\u003ca href=\"\/collections\/restoration-tools\"\u003eRestoration Tools\u003c\/a\u003e, \u003ca href=\"\/collections\/vw-bus\"\u003eVW Bus\u003c\/a\u003e, \u003ca href=\"\/collections\/all-vw-aircooled\"\u003eAll VW Aircooled\u003c\/a\u003e\u003c\/p\u003e","brand":"Washburn's Metal","offers":[{"title":"Default Title","offer_id":44094134812787,"sku":"T05","price":1200.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/products\/image_12b975d0-4d89-4a3f-a249-9f918d2f097e.jpg?v=1720730657"},{"product_id":"vw-bus-cargo-door-pin-reamer-quarter-inch","title":"Washburn's 1\/4\" Hand Reamer | VW Type 2 Bus Cargo-Door Hinge | Pairs with #BS01 Oversized Pin (T09)","description":"\u003ch2\u003e\u003cb\u003eWashburn's 1\/4\" Hand Reamer — VW Type 2 Bus Cargo-Door Hinge Restoration\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003eThe companion tool to the \u003cb\u003e#BS01 oversized hinge pin\u003c\/b\u003e: a \u003cb\u003e1\/4\" hand reamer\u003c\/b\u003e that cleans, sizes, and trues a worn VW Bus cargo-door hinge hole so the oversized pin seats tight. The right way to fix a sloppy cargo-door hinge.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eVehicle Fitment\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\n\u003cb\u003eVW Type 2 Bus:\u003c\/b\u003e Early cargo-door hinge restoration, used with the #BS01 oversized hinge pin\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eWhy Choose Washburn's Metal?\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp\u003eMade in-house by \u003cb\u003eWashburn's Metal\u003c\/b\u003e of Orange, California, this is a reusable shop tool built to do the hinge job correctly — and keep in the toolbox for the next one.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eKey Features \u0026amp; Benefits\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003ePrecise sizing:\u003c\/b\u003e Cleans and trues the worn hinge bore for an exact oversized-pin fit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePurpose-matched:\u003c\/b\u003e Pairs with the #BS01 oversized cargo-door hinge pin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReusable:\u003c\/b\u003e A hand tool you keep for the next hinge job.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e 1\/4\" hand reamer\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePart Number:\u003c\/b\u003e T09\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e Washburn's Metal (Orange, CA)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eWhat's this used for?\u003c\/b\u003e Truing a worn cargo-door hinge hole so the #BS01 oversized pin fits correctly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eIs it reusable?\u003c\/b\u003e Yes — it's a hand reamer you keep in the toolbox for the next hinge job.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003e\u003cb\u003eExplore Related Categories\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"\/collections\/restoration-tools\"\u003eRestoration Tools\u003c\/a\u003e · \u003ca href=\"\/collections\/vw-bus\"\u003eVW Bus\u003c\/a\u003e · \u003ca href=\"\/collections\/hardware\"\u003eHardware\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e⚠️ WARNING (California Prop 65):\u003c\/strong\u003e This product can expose you to chemicals which are known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Washburn's Metal","offers":[{"title":"Default Title","offer_id":40302454210675,"sku":"#T09","price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/products\/image_bd6c777d-642c-4221-99a4-89be966f83a6.jpg?v=1658827181"},{"product_id":"vw-split-bus-windshield-frame-opening-fixtures","title":"Washburn's Windshield Frame Opening Fixtures | VW Split Window Bus (1950-1963) | Weld Fixture Pair","description":"\u003ch2\u003e\u003cb\u003eWashburn's Windshield Frame Opening Fixtures — VW Split Window Bus (Pair)\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003eDesigned and made in-house at \u003cb\u003eWashburn's Metal\u003c\/b\u003e, these \u003cb\u003ewindshield frame opening fixtures\u003c\/b\u003e keep the frame opening in correct dimension during nose-skin welding or frame repair — so the glass fits properly when you're done. Sold as a pair, available with or without the Safari window recession.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eVehicle Fitment\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\n\u003cb\u003eVW Type 2 Split Window Bus:\u003c\/b\u003e 1950–1963 (all years)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eWhy Choose Washburn's Metal?\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp\u003eDesigned and machined in-house by \u003cb\u003eWashburn's Metal\u003c\/b\u003e of Orange, California, these fixtures are purpose-built to hold a Split Bus windshield opening true through the toughest sheet-metal work.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eKey Features \u0026amp; Benefits\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eHolds correct dimension:\u003c\/b\u003e Keeps the windshield frame opening true during nose-skin welding or frame repair.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProper glass fitment:\u003c\/b\u003e Ensures the windshield fits correctly once the work is complete.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSold as a pair:\u003c\/b\u003e Both fixtures needed for the job.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSafari option:\u003c\/b\u003e Available with or without the Safari window recession.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e Windshield frame opening fixtures\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSold As:\u003c\/b\u003e Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOptions:\u003c\/b\u003e With or without Safari window recession\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVehicle:\u003c\/b\u003e VW Type 2 Split Window Bus (1950–1963)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e Washburn's Metal (Orange, CA)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eWhat are these fixtures for?\u003c\/b\u003e Keeping the windshield frame opening in correct dimension during nose-skin welding or frame repair, so the glass fits properly afterward.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAre they sold individually or as a pair?\u003c\/b\u003e Sold as a pair.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDo they work with Safari windows?\u003c\/b\u003e Yes — they're available with or without the Safari window recession.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003e\u003cb\u003eExplore Related Categories\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"\/collections\/restoration-tools\"\u003eRestoration Tools\u003c\/a\u003e · \u003ca href=\"\/collections\/vw-bus\"\u003eVW Bus\u003c\/a\u003e · \u003ca href=\"\/collections\/body-panels\"\u003eBody Panels\u003c\/a\u003e\u003c\/p\u003e","brand":"Washburn's Metal","offers":[{"title":"With Safari Recession","offer_id":40429619740787,"sku":"","price":85.0,"currency_code":"USD","in_stock":true},{"title":"Without Safari Recession","offer_id":40429619773555,"sku":"","price":85.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/products\/image_bcf534b6-a3c5-4289-887c-d63efd4094e8.jpg?v=1660438222"},{"product_id":"vw-split-bus-pop-out-window-hinge-welding-fixture","title":"Washburn's Pop-Out Window Hinge Welding Fixture | VW Split Window Bus (1950-1963) | Weld Jig (BS04)","description":"\u003ch2\u003e\u003cb\u003eWashburn's Pop-Out Side Window Hinge Welding Fixture — VW Split Window Bus\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003eDesigned and made in-house at \u003cb\u003eWashburn's Metal\u003c\/b\u003e, this \u003cb\u003ewelding fixture\u003c\/b\u003e holds a pop-out side-window hinge in precise position while you weld — so you don't end up with a hinge that's close but not quite right. A must-have jig for any serious Split Bus restoration.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eVehicle Fitment\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\n\u003cb\u003eVW Type 2 Split Window Bus:\u003c\/b\u003e 1950–1963, pop-out side window hinges\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eWhy Choose Washburn's Metal?\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp\u003eDesigned and machined in-house by \u003cb\u003eWashburn's Metal\u003c\/b\u003e of Orange, California, this jig is purpose-built to make hinge placement accurate and repeatable on Split Bus restoration and conversion projects.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eKey Features \u0026amp; Benefits\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003ePrecise placement:\u003c\/b\u003e Holds the pop-out hinge in exact position while you weld.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRepeatable results:\u003c\/b\u003e Delivers consistent hinge placement across restoration and conversion projects.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRestoration-grade jig:\u003c\/b\u003e A must-have tool for serious Split Bus work.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e Pop-out side window hinge welding fixture (jig)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePart Number:\u003c\/b\u003e BS04\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVehicle:\u003c\/b\u003e VW Type 2 Split Window Bus (1950–1963)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e Washburn's Metal (Orange, CA)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eWhat does this fixture do?\u003c\/b\u003e It holds the pop-out side-window hinge in precise position while you weld, so the hinge ends up correctly placed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWill it give repeatable results?\u003c\/b\u003e Yes — it's built for repeatable hinge placement across restoration and conversion projects.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003e\u003cb\u003eExplore Related Categories\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"\/collections\/restoration-tools\"\u003eRestoration Tools\u003c\/a\u003e · \u003ca href=\"\/collections\/vw-bus\"\u003eVW Bus\u003c\/a\u003e · \u003ca href=\"\/collections\/body-panels\"\u003eBody Panels\u003c\/a\u003e\u003c\/p\u003e","brand":"Washburn's Metal","offers":[{"title":"Default Title","offer_id":40357376852083,"sku":"BS04","price":65.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/products\/image_a1ccf2c6-e910-4435-8877-956ed105c690.jpg?v=1660435381"},{"product_id":"1962-1967-type-2-turn-signal-template","title":"Washburn's Magnetic Turn Signal Templates | 1962–1967 VW Type 2 Bus | CNC-Cut L\/R Set (T13)","description":"\u003ch2\u003e\u003cb\u003eVW Type 2 Bus Magnetic Turn Signal Templates (1962–1967) | CNC-Cut Left \u0026amp; Right Set\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003eIf you've cut turn-signal openings into a fresh nose skin by hand, you know the problem: aftermarket skins come blank so they fit every year, which leaves you measuring and cutting your good metal and hoping you got it right. These \u003cb\u003emagnetic templates\u003c\/b\u003e fix the signal openings for the \u003cb\u003e1962–1967 Type 2\u003c\/b\u003e in the exact factory location, so you scribe and cut with confidence instead of guesswork.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eVehicle Fitment\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eVW Type 2 Transporter \/ Bus:\u003c\/b\u003e 1962–1967 (confirmed)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eWhy Choose Washburn's Metal?\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp\u003eMade in-house at \u003cb\u003eWashburn's Metal, Orange, CA\u003c\/b\u003e, these are heavy-duty, thick magnetic templates built to hold position against the metal while you work — not flimsy stick-ons.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eKey Features \u0026amp; Benefits\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003ePrecision Fit:\u003c\/b\u003e CNC-cut to seat the turn-signal opening where the factory put it on 1962–1967 buses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHeavy-Duty Magnets:\u003c\/b\u003e Thick magnetic templates that hold position against the metal while you work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAccurate Alignment:\u003c\/b\u003e Seats against the upper corner outer flange and body line for repeatable placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eComplete Set:\u003c\/b\u003e Includes both driver (left) and passenger (right) templates.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eHow to Use\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003ePlace:\u003c\/b\u003e Set the magnetic template into the upper corner of the nose skin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eScribe:\u003c\/b\u003e Trace the cut opening onto your metal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCut:\u003c\/b\u003e Remove the template and cut to the line.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eSet:\u003c\/b\u003e Left and right templates\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eConstruction:\u003c\/b\u003e CNC-cut magnetic template\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Washburn's-original, Orange, CA\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePart Number:\u003c\/b\u003e T13\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eWhat years does this fit?\u003c\/b\u003e The 1962–1967 Type 2. For 1955–1962 bullet-signal buses, see our separate T12 template set.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDo I get both sides?\u003c\/b\u003e Yes — driver and passenger templates are both included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWill it hold while I work?\u003c\/b\u003e Yes — the magnets are heavy-duty and hold the template flat against the panel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003e\u003cb\u003eExplore Related Categories\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp\u003eRestoring a Bus nose? Browse \u003ca href=\"\/collections\/restoration-tools\"\u003eRestoration Tools\u003c\/a\u003e, \u003ca href=\"\/collections\/body-panels\"\u003eBody Panels\u003c\/a\u003e, and everything for the \u003ca href=\"\/collections\/vw-bus\"\u003eVW Bus\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e⚠ WARNING (California Prop 65):\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Washburn's Metal","offers":[{"title":"Default Title","offer_id":40404130857075,"sku":"T13","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/A20241022_155957.jpg?v=1734644104"},{"product_id":"1955-1962-type-2-magnetic-bullet-turn-signal-template","title":"Washburn's Magnetic Bullet Turn Signal Templates | 1955–1962 VW Type 2 Bus | CNC-Cut L\/R Set (T12)","description":"\u003ch2\u003e\u003cb\u003eVW Type 2 Bus \"Bullet\" Turn Signal Templates (1955–1962) | CNC-Cut Left \u0026amp; Right Set\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003eIf you've cut turn-signal openings into a fresh nose skin by hand, you know the problem: aftermarket skins come blank so they fit every year, which leaves you measuring and cutting your good metal and hoping you got it right. These \u003cb\u003emagnetic templates\u003c\/b\u003e fix the openings for the \u003cb\u003e1955–1962 Type 2 \"bullet\" turn signals\u003c\/b\u003e in the exact factory location, so you scribe and cut with confidence instead of guesswork.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eVehicle Fitment\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eVW Type 2 Transporter \/ Bus:\u003c\/b\u003e 1955–1962, \"bullet\" turn-signal style (confirmed)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eWhy Choose Washburn's Metal?\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp\u003eMade in-house at \u003cb\u003eWashburn's Metal, Orange, CA\u003c\/b\u003e, these are heavy-duty, thick magnetic templates built to hold position against the metal while you work — not flimsy stick-ons.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eKey Features \u0026amp; Benefits\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003ePrecision Fit:\u003c\/b\u003e CNC-cut to seat the \"bullet\" turn-signal opening where the factory put it on 1955–1962 buses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHeavy-Duty Magnets:\u003c\/b\u003e Thick magnetic templates that hold position against the metal while you work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAccurate Alignment:\u003c\/b\u003e Seats against the upper corner outer flange and body line for repeatable placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eComplete Set:\u003c\/b\u003e Includes both driver (left) and passenger (right) templates.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eHow to Use\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003ePlace:\u003c\/b\u003e Set the magnetic template into the upper corner of the nose skin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eScribe:\u003c\/b\u003e Trace the cut opening onto your metal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCut:\u003c\/b\u003e Remove the template and cut to the line.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eSet:\u003c\/b\u003e Left and right templates\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eConstruction:\u003c\/b\u003e CNC-cut magnetic template\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Washburn's-original, Orange, CA\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePart Number:\u003c\/b\u003e T12\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eWhat years does this fit?\u003c\/b\u003e The 1955–1962 Type 2 with \"bullet\" turn signals. For 1962–1967 buses, see our separate T13 template set.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDo I get both sides?\u003c\/b\u003e Yes — driver and passenger templates are both included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWill it hold while I work?\u003c\/b\u003e Yes — the magnets are heavy-duty and hold the template flat against the panel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003e\u003cb\u003eExplore Related Categories\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp\u003eRestoring a Split Bus nose? Browse \u003ca href=\"\/collections\/restoration-tools\"\u003eRestoration Tools\u003c\/a\u003e, \u003ca href=\"\/collections\/body-panels\"\u003eBody Panels\u003c\/a\u003e, and everything for the \u003ca href=\"\/collections\/vw-bus\"\u003eVW Bus\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e⚠ WARNING (California Prop 65):\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Washburn's Metal","offers":[{"title":"Default Title","offer_id":40458503979123,"sku":"T12","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/products\/image_700f84e4-d804-412c-9d48-a3df18ab985b.jpg?v=1663821819"},{"product_id":"volkswagen-frame-head-magnetic-caster-cut-templates-type-1-ghia-thing","title":"Washburn's Magnetic Framehead Caster-Cut Templates | VW Type 1 Beetle, Ghia \u0026 Thing | Reusable (T14)","description":"\u003ch2\u003e\u003cb\u003eVW Type 1 Framehead Caster-Cut Templates | Magnetic, Beetle \/ Ghia \/ Thing\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003eCaster-cutting a VW frame head is all about getting the angle right — guess it and the car never tracks straight. These \u003cb\u003emagnetic layout templates\u003c\/b\u003e snap onto the chassis and give you a \u003cb\u003eprecise, repeatable cut line\u003c\/b\u003e, taking the guesswork out of the job.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eVehicle Fitment\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eVW Type 1 (Beetle), Karmann Ghia \u0026amp; Thing:\u003c\/b\u003e Any year frame head (confirmed)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eWhy Choose Washburn's Metal?\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp\u003eMade by \u003cb\u003eWashburn's Metal, Orange, CA\u003c\/b\u003e, these are a reusable, keep-in-the-shop tool built for repeatable caster cuts.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eKey Features \u0026amp; Benefits\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003ePrecise, Repeatable Cut Line:\u003c\/b\u003e Snap into place to lay out an accurate caster cut every time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMagnetic Hold:\u003c\/b\u003e Magnetic frame-head templates seat onto the chassis and stay put while you work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReusable Shop Tool:\u003c\/b\u003e Use it on every caster job — not a one-time consumable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e Magnetic caster-cut templates\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePart Number:\u003c\/b\u003e T14\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e Washburn's Metal (Orange, CA)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eWhat years does it work on?\u003c\/b\u003e Any year Type 1, Ghia, and Thing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eIs it reusable?\u003c\/b\u003e Yes — the magnetic templates are a keep-in-the-shop tool for every caster job.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003e\u003cb\u003eExplore Related Categories\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp\u003eWorking on your chassis? Browse \u003ca href=\"\/collections\/restoration-tools\"\u003eRestoration Tools\u003c\/a\u003e, \u003ca href=\"\/collections\/chassis-1\"\u003eChassis\u003c\/a\u003e, and everything for the \u003ca href=\"\/collections\/all-vw-aircooled\"\u003eVW Aircooled\u003c\/a\u003e range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e⚠️ WARNING (California Prop 65):\u003c\/strong\u003e This product can expose you to chemicals which are known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Washburn's Metal","offers":[{"title":"Default Title","offer_id":40478076338291,"sku":"T14","price":18.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/products\/image_d6c0f3c7-5d67-4999-ae23-79eb921bcb7a.heic?v=1664490219"},{"product_id":"washburns-metal-bus-deluxe-trim-installation-three-piece-tool-kit","title":"Washburn's VW Bus Deluxe Trim Install Tool Kit | Split-Window Samba \/ 23-Window | 3-Piece Set (BS07)","description":"\u003ch2\u003e\u003cb\u003eVW Bus Deluxe Trim Installation Tool Kit | Three-Piece Set for Samba, 23-Window \u0026amp; Deluxe Trim\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003eA \u003cb\u003ethree-piece tool kit\u003c\/b\u003e designed specifically for installing \u003cb\u003edeluxe trim\u003c\/b\u003e on the VW Split-Window Bus (Samba \/ 23-window \/ 21-window) and other Bus applications using factory deluxe-style aluminum body trim. It eliminates the guesswork and damaged trim that comes with using improvised tools or trying to install with bare hands. Made by \u003cb\u003eWashburn's Metal\u003c\/b\u003e. Part #BS07.\u003c\/p\u003e\n\u003cp\u003eVintage VW Bus deluxe trim is precision-stamped aluminum that bends, dents, or kinks if installed with the wrong tools. This kit gives you the right tools to \u003cb\u003eclip, position, and seat\u003c\/b\u003e the trim cleanly into the body clips without bending the trim or scratching the paint underneath — and the tools are \u003cb\u003ereusable\u003c\/b\u003e for every Bus you ever own.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eVehicle Fitment\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eVW Split-Window Bus (1950–1967):\u003c\/b\u003e Samba 21-window, 23-window, Deluxe, and other trim-equipped variants\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOther Bus applications:\u003c\/b\u003e Any Bus using factory deluxe-style aluminum body trim\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTrim compatibility:\u003c\/b\u003e Works with all major reproduction trim manufacturers (Wolfsburg West, Grumpy's Metal Trim, BBT, etc.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eWhy Choose Washburn's Metal?\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp\u003eVintage deluxe trim was installed at the factory with purpose-designed equipment. Restorers without those tools typically end up with damaged trim and a second order for replacement before the job is done. This \u003cb\u003eWashburn's Metal\u003c\/b\u003e kit gives you the correct tools so the trim goes on clean the first time.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eKey Features \u0026amp; Benefits\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003ePurpose-Built:\u003c\/b\u003e Designed for the specific clip, position, and seat steps of deluxe trim installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProtects Your Trim:\u003c\/b\u003e Seats trim into the body clips without bending the aluminum or scratching the paint underneath.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSaves Money:\u003c\/b\u003e The cost of one bent or scratched piece of replacement deluxe trim usually exceeds the cost of the kit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReusable:\u003c\/b\u003e A keep-in-the-shop tool that works on new reproduction trim and salvaged original trim alike.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eContents:\u003c\/b\u003e Three-piece tool set for deluxe trim installation (centerline block, drill pad, and insert tool)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eApplication:\u003c\/b\u003e Bus deluxe trim (body molding \/ side trim, also called Samba trim, 23-window trim, Wolfsburg West trim)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePart Number:\u003c\/b\u003e #BS07\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e Washburn's Metal (Orange, CA)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eIs this just for Samba Buses?\u003c\/b\u003e The kit is most commonly used on Samba (23-window) and Deluxe (21-window) Split-Window Buses, but it works for any Bus where you're installing the same family of factory-style aluminum side and body trim.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWill I save trim with this tool kit?\u003c\/b\u003e Almost certainly yes, especially if this is your first trim install. For a full Samba trim job, the kit pays for itself many times over.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWhat's in the kit specifically?\u003c\/b\u003e A three-piece set of installation tools designed for the specific clipping, positioning, and seating steps of deluxe trim installation. Check the product photos for the included pieces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCan I use it on used trim?\u003c\/b\u003e Yes. The tools work on new reproduction trim and on salvaged original trim, and are particularly valuable on original trim that is harder to find and more expensive to damage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWill it work with Wolfsburg West trim?\u003c\/b\u003e Yes. Wolfsburg West, BBT, and other major reproduction trim brands all use the same factory-style installation method, and these tools work across the brands.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDo I need any other tools besides this kit?\u003c\/b\u003e Basic hand tools (small hammers, marking tools, soft cloth for protection) plus this kit cover most installations. Some builders also use plastic body clips and trim adhesive depending on their approach.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003e\u003cb\u003eExplore Related Categories\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp\u003eRestoring a Split Bus? Browse \u003ca href=\"\/collections\/restoration-tools\"\u003eRestoration Tools\u003c\/a\u003e, \u003ca href=\"\/collections\/body-panels\"\u003eBody Panels\u003c\/a\u003e, and everything for the \u003ca href=\"\/collections\/vw-bus\"\u003eVW Bus\u003c\/a\u003e.\u003c\/p\u003e","brand":"Washburn's Metal","offers":[{"title":"Default Title","offer_id":40486668697715,"sku":"#BS07","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/20250813_152439A.jpg?v=1755561004"},{"product_id":"frame-horn-dollie","title":"Washburn's Metal Frame Horn Dolly — Single Wheel | VW Beetle, Bus, Ghia, Type 3 | 6\" Locking Caster (T02)","description":"\u003ch2\u003e\u003cb\u003eWashburn's Metal Frame Horn Dolly — Single Wheel | Transmission-Out VW Chassis\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003ePull the transmission and your VW chassis has nowhere to sit — and old jack stands are how projects end up on the floor. The \u003cb\u003eWashburn's Metal Frame Horn Dolly\u003c\/b\u003e bolts to your frame horns and rolls the chassis safely around the shop, no tipping, no falling. This is the \u003cb\u003esingle-wheel version\u003c\/b\u003e.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eVehicle Fitment\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eVW Beetle (Type 1):\u003c\/b\u003e All years\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVW Bus, Karmann Ghia \u0026amp; Type 3:\u003c\/b\u003e Pre-1968 (through 1968)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eNote:\u003c\/b\u003e Bolts to the frame horns after the transmission is removed.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eWhy Choose Washburn's Metal?\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp\u003eEvery dolly is \u003cb\u003eCNC-cut from 1\/4\" steel plate\u003c\/b\u003e, powder-coated, and hand-assembled in the USA — overbuilt to hold a bare chassis steady while you work.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eKey Features \u0026amp; Benefits\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eBolt-on design:\u003c\/b\u003e Mounts directly to the frame horns of a transmission-out VW chassis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLocking swivel caster:\u003c\/b\u003e Single 6\" caster with ball bearings, solid-steel construction, and a serviceable Zerk grease fitting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHeavy-duty build:\u003c\/b\u003e CNC-cut from 1\/4\" steel plate with a powder-coated hammer-tone finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHardware included:\u003c\/b\u003e Ships with all mounting hardware; the supplied M18 bolts store on the cart when not in use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMade in the USA:\u003c\/b\u003e Overbuilt and hand-assembled.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e 1\/4\" steel plate, CNC-cut, powder-coated (hammer-tone)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCaster:\u003c\/b\u003e One 6\" locking\/swivel, ball-bearing, solid steel, Zerk-fitted\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHardware:\u003c\/b\u003e M18 mounting bolts included (store on cart)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVersion:\u003c\/b\u003e Single-wheel (dual-wheel also available)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePart Number:\u003c\/b\u003e T02\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e Washburn's Metal (Orange, CA, USA)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eSingle or dual wheel — which do I need?\u003c\/b\u003e Single-wheel (this listing) is the lighter-duty\/economy option; the dual-wheel version adds stability for heavier or longer-term storage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDoes it lock?\u003c\/b\u003e Yes — the caster locks so the chassis won't roll away while you work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDoes it include hardware?\u003c\/b\u003e Yes — all mounting hardware is included, and the M18 bolts store on the cart when not in use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003e\u003cb\u003eExplore Related Categories\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp\u003eGear up your build: browse \u003ca href=\"\/collections\/restoration-tools\"\u003eRestoration Tools\u003c\/a\u003e, our \u003ca href=\"\/collections\/washburn-originals\"\u003eWashburn's Signature Series\u003c\/a\u003e, and everything for the \u003ca href=\"\/collections\/all-vw-aircooled\"\u003eAir-Cooled VW\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e⚠️ WARNING (California Prop 65):\u003c\/b\u003e This product can expose you to chemicals which are known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Washburn's Metal","offers":[{"title":"Default Title","offer_id":40837583405171,"sku":"T02","price":175.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/20240813_134230_FIXED.jpg?v=1726618776"},{"product_id":"duel-wheel-frame-horn-dollie","title":"Washburn's Metal Frame Horn Dolly — Dual-Wheel | VW Beetle, Bus, Ghia, Type 3 | Dual Heavy-Duty Casters (T01)","description":"\u003ch2\u003e\u003cb\u003eWashburn's Metal Frame Horn Dolly — Dual-Wheel | Transmission-Out VW Chassis\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003ePurpose-built for moving a \u003cb\u003etransmission-out VW chassis\u003c\/b\u003e around the shop or garage without scraping the frame horns or damaging the floor pan. The \u003cb\u003edual-wheel design\u003c\/b\u003e distributes load over both frame horns simultaneously for stable, controlled movement of even a fully-stripped pan.\u003c\/p\u003e\n\u003cp\u003eOnce the transmission is out, the rear of the pan rests on the frame horns instead of rolling on its own wheels. This dolly cradles the frame horns on \u003cb\u003edual heavy-duty casters\u003c\/b\u003e so you can push the chassis with one hand, rotate it in place, and position it precisely for body lowering, alignment, or fabrication.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eVehicle Fitment\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eVW Beetle:\u003c\/b\u003e All years (pre-1968 frame horn geometry preferred)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVW Bus \/ Transporter:\u003c\/b\u003e Pre-1968 split-window and early Bay Window\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVW Karmann Ghia:\u003c\/b\u003e All years\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVW Type 3:\u003c\/b\u003e All years\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVW Thing:\u003c\/b\u003e 1973–1974\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eDesigned for:\u003c\/b\u003e Chassis work where the transmission is removed and the rear of the pan rests on the frame horns.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eWhy Choose Washburn's Metal?\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp\u003eFabricated in the USA by Washburn's Metal, this dolly is overbuilt to support a complete bare VW pan through a full restoration — stable enough to leave under the chassis for months until the transmission goes back in.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eKey Features \u0026amp; Benefits\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eDual-wheel stability:\u003c\/b\u003e Distributes load over both frame horns for controlled movement of a stripped pan.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCradled frame horns:\u003c\/b\u003e Sized cradles hold the VW frame horns securely while still rolling freely.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHeavy-duty casters:\u003c\/b\u003e Serviceable casters with Zerk grease fittings and ball bearings you can re-pack as needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eComplete hardware:\u003c\/b\u003e Includes two M18 frame-horn bolts, all caster mounting bolts, and on-cart bolt storage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMade in the USA:\u003c\/b\u003e Fabricated by Washburn's Metal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eDesign:\u003c\/b\u003e Dual-wheel frame horn dolly\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCapacity:\u003c\/b\u003e Supports a full VW chassis with transmission removed\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWheels:\u003c\/b\u003e Dual heavy-duty casters (serviceable, Zerk-fitted, ball-bearing)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHardware:\u003c\/b\u003e Two M18 frame-horn bolts plus caster mounting bolts included\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePart Number:\u003c\/b\u003e #T01\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e Washburn's Metal (made in USA)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eWhy use a frame horn dolly instead of jack stands?\u003c\/b\u003e Once the transmission is pulled, the rear of the chassis loses its support. A frame horn dolly bolts to the rear frame horns so the chassis stays stable and rollable in your garage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWill this fit any air-cooled VW?\u003c\/b\u003e It fits pre-'68 Bus, Type 3, all years Karmann Ghia, Thing, and Beetle — anything with the standard rear frame-horn bolt pattern.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDual wheels vs. single wheel?\u003c\/b\u003e Dual wheels give more stability and weight capacity if the engine and trans are out long term. Single-wheel dollies are cheaper and easier to maneuver in tight spaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAre the casters serviceable?\u003c\/b\u003e Yes — Zerk grease fittings and ball bearings, so you can re-pack the bearings as needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWhat hardware is included?\u003c\/b\u003e Two M18 bolts for bolting the dolly to your frame horns, all caster mounting bolts, and a storage provision on the cart for the bolts when not in use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003e\u003cb\u003eCustomer Review\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp\u003eSee the Dual-Wheel Frame Horn Dolly in action from a customer's own shop:\u003c\/p\u003e\n\u003cdiv style=\"position:relative; padding-bottom:177.78%; height:0; max-width:400px;\"\u003e\n\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/B0r0ZX1tBxY\" style=\"position:absolute; top:0; left:0; width:100%; height:100%;\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\u003chr\u003e\n\u003ch3\u003e\u003cb\u003eExplore Related Categories\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp\u003eGear up your build: browse \u003ca href=\"\/collections\/restoration-tools\"\u003eRestoration Tools\u003c\/a\u003e, our \u003ca href=\"\/collections\/washburn-originals\"\u003eWashburn's Signature Series\u003c\/a\u003e, and everything for the \u003ca href=\"\/collections\/all-vw-aircooled\"\u003eAir-Cooled VW\u003c\/a\u003e.\u003c\/p\u003e","brand":"Washburn's Metal","offers":[{"title":"Default Title","offer_id":40837597659251,"sku":"#T01","price":250.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/20240821_224442A.jpg?v=1726018095"},{"product_id":"beetle-type-3-ghia-thing-body-cart","title":"Washburn's Metal Rolling Body Cart | VW Beetle, Ghia, Type 3, Thing | Weld-Together Restoration Cart (T04)","description":"\u003ch2\u003e\u003cb\u003eWashburn's Metal Rolling Body Cart | VW Beetle, Ghia, Type 3 \u0026amp; Thing Restoration\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003eAfter separating the body from the pan during a restoration, you'll quickly find out you need a safe and easy way to move and transport the body. Our answer is this \u003cb\u003esimple, stout body cart\u003c\/b\u003e — every Beetle body in our shop rides on one of these, and we use them on every restoration we do.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eVehicle Fitment\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eVW Beetle:\u003c\/b\u003e All years (1949–1979), Standard and Super\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVW Karmann Ghia:\u003c\/b\u003e 1956–1974\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVW Type 3:\u003c\/b\u003e 1962–1973 (Notchback, Squareback, Fastback)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVW Thing (Type 181):\u003c\/b\u003e 1973–1974\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eNote:\u003c\/b\u003e Not sized for Bus bodies — those require a different cart.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eTwo Ways to Buy\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eKit (parts only — #T04, $250):\u003c\/b\u003e All steel tubing, wheels, and hardware shipped to you. You weld it together. Best for home builders with welding equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFully Assembled \u0026amp; Welded ($450):\u003c\/b\u003e We build it. Local pickup only at our shop in Orange, California — these are too heavy and bulky for cost-effective shipping fully welded.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eKey Features \u0026amp; Benefits\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eStout steel frame:\u003c\/b\u003e Built from .090\" wall steel tubing to carry a complete Beetle body.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCNC-cut gussets:\u003c\/b\u003e Precise weld joints for a strong, square build.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLocking swivel casters:\u003c\/b\u003e Quality casters for safe, controlled movement — all four lock to keep the body stationary while you work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHeater-channel tie-down:\u003c\/b\u003e Provisions to bolt the heater channels directly to the cart for added safety during transport.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eComplete hardware:\u003c\/b\u003e All hardware included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eFrame:\u003c\/b\u003e .090\" wall steel tubing\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGussets:\u003c\/b\u003e CNC-cut for precise weld joints\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCasters:\u003c\/b\u003e Locking swivel casters\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHardware:\u003c\/b\u003e All hardware included\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePart Number:\u003c\/b\u003e #T04 (kit)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e Washburn's Metal (Orange, CA)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eDo I need to be a welder to build the kit?\u003c\/b\u003e Yes. The kit is designed for stick or MIG welding. If you don't weld, order the fully assembled version and pick it up in Orange, CA.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWill it hold a fully steel Beetle body with fenders?\u003c\/b\u003e Yes — these are built to support a complete Beetle body. We use them daily on full restorations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCan I ship the assembled cart?\u003c\/b\u003e The assembled version is local pickup only. Shipping a welded cart that size costs more than the cart itself.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWill it fit a Bus body?\u003c\/b\u003e No. This is sized for Beetle \/ Ghia \/ Type 3 \/ Thing bodies. Bus bodies need a different cart.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDo the wheels lock?\u003c\/b\u003e Yes — all four casters lock to keep the body stationary when you're working on it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003ePickup Location:\u003c\/b\u003e Washburn's Metal, Orange, California\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003e\u003cb\u003eExplore Related Categories\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp\u003eGear up your build: browse \u003ca href=\"\/collections\/restoration-tools\"\u003eRestoration Tools\u003c\/a\u003e, our \u003ca href=\"\/collections\/washburn-originals\"\u003eWashburn's Signature Series\u003c\/a\u003e, and everything for the \u003ca href=\"\/collections\/all-vw-aircooled\"\u003eAir-Cooled VW\u003c\/a\u003e.\u003c\/p\u003e","brand":"Washburn's Metal","offers":[{"title":"non-welded kit parts for 1 cart","offer_id":42201225134195,"sku":"#T04","price":250.0,"currency_code":"USD","in_stock":true},{"title":"Fully Assembled and Welded Cart","offer_id":42201279529075,"sku":"","price":450.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/image_315b252b-d3a7-4980-bfa4-f5958dcce345.heic?v=1685296785"},{"product_id":"porsche-356-celette-door-isolation-fixtures-pair","title":"356 CELETTE Door Isolation Fixtures | Porsche 356A\/B\/C | Body Restoration Jig, Pair","description":"\u003ch2\u003e\u003cb\u003ePorsche 356 CELETTE Door Isolation Fixtures | In-House Body Restoration Tooling\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003eThese \u003cb\u003ePorsche 356 door isolation fixtures\u003c\/b\u003e are designed and built in-house at \u003cb\u003eWashburn's Metal\u003c\/b\u003e for use with \u003cb\u003eCELETTE-type frame machines\u003c\/b\u003e. They hold both doors in precise, measured position during body restoration to maintain correct door aperture geometry throughout the repair process. Sold as a pair.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eVehicle Fitment\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003ePorsche 356A, 356B, 356C:\u003c\/b\u003e 1950–1965\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eWhy Choose Washburn's Metal?\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp\u003eThis tooling is \u003cb\u003edesigned and built in-house\u003c\/b\u003e by our own shop for professional 356 bodywork, giving you precise, repeatable door positioning on a CELETTE-type bench.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eKey Features \u0026amp; Benefits\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eIn-House Design \u0026amp; Build:\u003c\/b\u003e Made at Washburn's Metal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCELETTE Compatible:\u003c\/b\u003e For use with CELETTE-type frame machines.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePrecise Positioning:\u003c\/b\u003e Holds both doors in measured position.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaintains Geometry:\u003c\/b\u003e Keeps correct door aperture geometry throughout the repair.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSold as a Pair:\u003c\/b\u003e Covers both doors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e Door isolation fixtures (restoration jig)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCompatibility:\u003c\/b\u003e CELETTE-type frame machines\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSold As:\u003c\/b\u003e Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e Washburn's Metal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eWhat does this fixture do?\u003c\/b\u003e Holds both doors in precise, measured position on a CELETTE-type frame machine during body restoration, maintaining correct door aperture geometry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDoes this work with any frame machine?\u003c\/b\u003e Designed for CELETTE-type machines; verify compatibility with your specific bench before ordering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWhich 356 models does this fit?\u003c\/b\u003e 356A, 356B, and 356C, 1950–1965.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eIs this sold individually or as a pair?\u003c\/b\u003e Sold as a pair (both doors).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003e\u003cb\u003eExplore Related Categories\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp\u003eMore for your 356 build: \u003ca href=\"\/collections\/porsche-356\"\u003ePorsche 356\u003c\/a\u003e, \u003ca href=\"\/collections\/restoration-tools\"\u003eRestoration Tools\u003c\/a\u003e, and \u003ca href=\"\/collections\/all-porsche\"\u003eAll Porsche\u003c\/a\u003e.\u003c\/p\u003e","brand":"Washburn's Metal","offers":[{"title":"Default Title","offer_id":42842344390771,"sku":"","price":2500.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/20240718_175534.jpg?v=1739262333"},{"product_id":"t11-split-bus-clock-location-template","title":"Split Bus Clock Location Template | VW Type 2 Split Window Bus | Magnetic, Made In-House (#T11)","description":"\u003ch2\u003e\u003cb\u003eSplit Bus Clock Location Template — Magnetic Dash Cutting Guide\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003eAdding a factory VW clock to your \u003cb\u003eSplit Window Bus\u003c\/b\u003e dash? This \u003cb\u003emagnetic\u003c\/b\u003e location template shows you exactly where to cut — \u003cb\u003eno guesswork, no misaligned holes\u003c\/b\u003e.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eVehicle Fitment\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eVW Type 2 Split Window Bus:\u003c\/b\u003e Dash clock location\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eWhy Choose Washburn's Metal?\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp\u003eThis template is \u003cb\u003edesigned and made in-house\u003c\/b\u003e at Washburn's Metal.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eKey Features \u0026amp; Benefits\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eMagnetic:\u003c\/b\u003e Holds itself in position on the dash while you mark and cut.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAccurate placement:\u003c\/b\u003e Shows exactly where to cut for a factory VW clock — no guesswork, no misaligned holes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e Magnetic location template\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eApplication:\u003c\/b\u003e Factory VW clock installation on Split Bus dash\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMade:\u003c\/b\u003e In-house at Washburn's Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePart Number:\u003c\/b\u003e #T11\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eWhat is this used for?\u003c\/b\u003e It marks exactly where to cut a Split Bus dash to add a factory VW clock.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHow does it stay in place?\u003c\/b\u003e It is magnetic, so it holds itself on the dash while you work.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003e\u003cb\u003eExplore Related Categories\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"\/collections\/restoration-tools\"\u003eRestoration Tools\u003c\/a\u003e · \u003ca href=\"\/collections\/vw-bus\"\u003eVW Bus\u003c\/a\u003e · \u003ca href=\"\/collections\/washburn-originals\"\u003eWashburn Originals\u003c\/a\u003e\u003c\/p\u003e","brand":"Washburn's Metal","offers":[{"title":"Default Title","offer_id":44022473916531,"sku":"#T11","price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/20251009_180753.jpg?v=1761262693"},{"product_id":"3210-high-speed-steel-straight-flute-reamer-oversized-door-pin-reamer","title":".3210\" HSS Straight Flute Reamer | VW \u0026 Porsche Door Pin Repair | 6\" OAL, Precision Ground","description":"\u003ch2\u003e\u003cb\u003e.3210\" HSS Straight Flute Reamer — Oversized Door Pin Reamer\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003eAchieve precision tolerances with this \u003cb\u003e.3210\" HSS straight flute reamer\u003c\/b\u003e. Ground for final-stage hole finishing, it delivers exact diameters and a smooth surface finish that standard drill bits can't provide — ideal for high-interference fits and precision assemblies.\u003c\/p\u003e\n\u003cp\u003eA shop essential for fitting an \u003cb\u003eoversized door hinge pin\u003c\/b\u003e when restoring a sagging door, as well as general automotive fabrication.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eVehicle Fitment\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp\u003eCommonly used for door hinge pin restoration on:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eVW Karmann Ghia:\u003c\/b\u003e All Years\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePorsche 356:\u003c\/b\u003e All Years\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eKey Features \u0026amp; Benefits\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eHigh-Speed Steel (HSS):\u003c\/b\u003e Excellent wear resistance and a sharp cutting edge under consistent shop use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eStraight Flute Design:\u003c\/b\u003e Easy chip clearance in through-holes and shallow blind holes across a variety of materials.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePrecision Sizing:\u003c\/b\u003e Ground to .3210\" for the critical \"just right\" fit on specialized pins, bolts, or shafts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRound Shank:\u003c\/b\u003e Compatible with standard drill presses, lathes, and milling machines.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eDiameter:\u003c\/b\u003e .3210\" (Decimal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e High-Speed Steel (HSS)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlute Type:\u003c\/b\u003e Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank:\u003c\/b\u003e Straight \/ Round\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLength:\u003c\/b\u003e 6\" Overall Length with a 1-1\/2\" Flute Length\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eWhat is this reamer used for?\u003c\/b\u003e Final-stage hole finishing — commonly to fit an oversized (2nd oversize) door hinge pin when repairing a sagging VW door.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWhat size is it?\u003c\/b\u003e .3210\" decimal diameter, HSS, straight flute, 6\" overall length with a 1-1\/2\" flute length.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWhat machines can drive it?\u003c\/b\u003e Its straight round shank works in standard drill presses, lathes, and milling machines.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003e\u003cb\u003eExplore Related Categories\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"\/collections\/restoration-tools\"\u003eRestoration Tools\u003c\/a\u003e, \u003ca href=\"\/collections\/all-vw-aircooled\"\u003eAll Air-Cooled VW\u003c\/a\u003e, \u003ca href=\"\/collections\/porsche-356\"\u003ePorsche 356\u003c\/a\u003e\u003c\/p\u003e","brand":"Washburn's Metal","offers":[{"title":"Default Title","offer_id":44470217048179,"sku":null,"price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/20260228_221922.jpg?v=1774114915"}],"url":"https:\/\/www.washburnsmetal.com\/collections\/pro-shop-tooling.oembed","provider":"Washburn's Metal","version":"1.0","type":"link"}