{"title":"VW Lug Bolts, Studs, Adapters \u0026 Spacers","description":"\u003cp\u003e\u003cstrong\u003eChoose lug hardware by your wheel's seat and your hub's thread.\u003c\/strong\u003e Stock VW steel wheels use ball-seat (radius) lug bolts: M12x1.5 on 5x205 Beetle, Ghia and Type 3, and M14x1.5 on 4x130 cars and the 5x205 Bus. The 1971–79 Bus uses M14x1.5 studs and nuts. Most EMPI and aftermarket alloys need 60° cone-seat hardware. A ball-seat bolt in a cone-seat wheel, or the other way round, only touches the wheel on a thin ring. It can work loose, so never mix them.\u003c\/p\u003e\n\u003cp\u003eHere you'll find restored German OEM ball-seat bolts (KAMAX, HWE, Bulten), EMPI chrome ball-seat and 60° bolts, Porsche-style lug nuts, King Performance titanium lug nuts, press-in and screw-in stud conversions, extra-long bolts and studs for spacers, 3\" spacers, and EMPI steel adapters from 5x205 VW hubs to 5x130 Porsche wheels.\u003c\/p\u003e\n\u003cp\u003eWhen you add a spacer or adapter, check thread engagement. Longer bolts or studs are usually required.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/pages\/vw-wheel-fitment-guide\"\u003eNot sure which pattern you have? Read our VW wheel fitment guide.\u003c\/a\u003e\u003c\/p\u003e","products":[{"product_id":"restored-genuine-german-kamax-lug-bolts-14mm-x-1-5-sets-of-5","title":"KAMAX German OEM Lug Bolts, Restoration Line — 14mm x 1.5 Ball Seat, Black Zinc, Set of 5 | VW Beetle, Ghia, Type 3, Bus \u0026 Thing","description":"\u003ch2\u003e\u003cb\u003eRestored Genuine German KAMAX Lug Bolts | 14mm x 1.5 (Set of 5)\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cb\u003eShort answer:\u003c\/b\u003e These are restored genuine German KAMAX lug bolts, 14mm x 1.5 ball seat with a 19mm hex in black zinc, sold as a set of 5. They are listed for the 1968–1979 Beetle and Super Beetle, 1967–1974 Karmann Ghia, 1966–1973 Type 3, 1955–1970 Bus and 1973–1974 Thing with factory steel wheels.\u003c\/p\u003e\n\u003cp\u003eUpgrade your restoration with the structural integrity of original factory hardware. These are not modern reproductions; they are authentic \u003cb\u003eGerman-made KAMAX lug bolts\u003c\/b\u003e, the gold standard for vintage Volkswagen wheel fitment.\u003c\/p\u003e\n\u003cp\u003eEvery bolt in this set has been meticulously sourced, inspected for thread integrity and seat wear, and professionally refinished to exceed original factory aesthetics.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eVehicle Fitment\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp\u003eThese 14mm x 1.5 ball-seat bolts fit factory steel wheels on 4-lug (4x130) Beetles, Ghias, Type 3s and Things, and on the 5-lug 1955–1970 Bus:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eVW Beetle \u0026amp; Super Beetle:\u003c\/b\u003e 1968–1979\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVW Karmann Ghia:\u003c\/b\u003e 1967–1974\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVW Type 3 (Fastback, Squareback):\u003c\/b\u003e 1966–1973\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVW Bus (Type 2):\u003c\/b\u003e 1955–1970 (Wide 5 pattern)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVW Thing:\u003c\/b\u003e 1973–1974\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eKey Features \u0026amp; Benefits\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eDeep Cleaned:\u003c\/b\u003e All road grime and age-related oxidation removed via media blasting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected:\u003c\/b\u003e Each bolt is hand-inspected to ensure the hex head is not rounded and the 14mm x 1.5 threads are crisp.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBlack Zinc Plating:\u003c\/b\u003e Finished in a premium black zinc coating for superior corrosion resistance and a sleek, understated look that complements both original steel wheels and high-end restorations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e KAMAX (Original German OEM).\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSize:\u003c\/b\u003e 14mm x 1.5 thread pitch.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSeat Type:\u003c\/b\u003e Ball Seat (Radius) — essential for correct torque and safety on factory steel wheels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHex Size:\u003c\/b\u003e 19mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFeature:\u003c\/b\u003e Iconic recessed \"dimple\" head design and KAMAX headstamp.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSold As:\u003c\/b\u003e Set of 5.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eWill these work on aftermarket aluminum wheels?\u003c\/b\u003e These are Ball Seat bolts designed for factory steel wheels. If you run aftermarket aluminum wheels, verify whether your wheels require a conical (tapered) seat before installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHow many bolts are included?\u003c\/b\u003e This listing is sold as a set of 5.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAre these genuine German parts?\u003c\/b\u003e Yes — they are authentic German-made KAMAX bolts, restored and black-zinc plated, not reproductions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDoes this fit a 1967 VW Beetle?\u003c\/b\u003e No. The 1967 Beetle uses 5-lug 12mm hardware. These 14mm bolts are listed for the 1968–1979 Beetle, 1971–1979 Super Beetle, 1967–1974 Karmann Ghia, 1966–1973 Type 3, 1955–1970 Bus and 1973–1974 Thing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWhat is the part number?\u003c\/b\u003e These are genuine KAMAX-stamped German lug bolts restored by Washburn's Metal; the 14 x 1.5 ball-seat bolt is also sold by JBugs as 251601139.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003e\u003cb\u003eExplore Related Categories\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp\u003eFitting wheels? Browse more \u003ca href=\"\/collections\/wheels\"\u003eWheels\u003c\/a\u003e, \u003ca href=\"\/collections\/hardware\"\u003eHardware\u003c\/a\u003e, and \u003ca href=\"\/collections\/all-vw-aircooled\"\u003eAir-Cooled VW\u003c\/a\u003e parts.\u003c\/p\u003e\u003ch3\u003e\u003cb\u003eProp 65 Warning\u003c\/b\u003e\u003c\/h3\u003e\u003cp\u003eWARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.p65warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Washburn's Metal","offers":[{"title":"Default Title","offer_id":44466379128947,"sku":null,"price":22.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/20260306_181241.jpg?v=1774113896"},{"product_id":"hwe-14mm-x-1-5-ball-seat-lug-bolts-original-german-oem-refurbished-sold-in-sets-of-5","title":"HWE German OEM Ball Seat Lug Bolts, Restoration Line — 14mm x 1.5, Black Zinc, Set of 5 | Air-Cooled VW Beetle, Ghia, Type 3, Bus \u0026 Thing","description":"\u003ch2\u003e\u003cb\u003eHWE German OEM Ball Seat Lug Bolts — 14mm x 1.5 (Set of 5)\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cb\u003eShort answer:\u003c\/b\u003e These are genuine German OEM HWE\/KAMAX ball seat lug bolts, 14mm x 1.5 with a 19mm hex, restored in black zinc and sold as a set of 5. They fit factory steel wheels on 1968–1979 VW Beetle and Super Beetle, Karmann Ghia, Type 3, Thing and 1955–1970 Wide-5 Bus.\u003c\/p\u003e\n\u003cp\u003eGenuine \u003cb\u003eOEM German-made lug bolts\u003c\/b\u003e — the original equipment supplied for Volkswagen and Porsche — featuring the sought-after \u003cb\u003eHWE\u003c\/b\u003e and \u003cb\u003eKAMAX\u003c\/b\u003e headstamps. Each bolt is rescued from vintage stock, hand-inspected, and refinished for high-end, show-quality restorations.\u003c\/p\u003e\n\u003cp\u003eRestored with a \u003cb\u003epremium black zinc finish\u003c\/b\u003e for durable corrosion resistance and a clean, factory-correct look.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eVehicle Fitment\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eVW Beetle \u0026amp; Super Beetle:\u003c\/b\u003e 1968–1979\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVW Karmann Ghia:\u003c\/b\u003e 1967–1974\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVW Type 3 (Fastback, Squareback, Notchback):\u003c\/b\u003e 1966–1973\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVW Bus (Type 2):\u003c\/b\u003e 1955–1970 (Wide 5 pattern)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVW Thing:\u003c\/b\u003e 1973–1974\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eKey Features \u0026amp; Benefits\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eGenuine OEM:\u003c\/b\u003e HWE \/ KAMAX headstamps with the iconic recessed \"dimple\" head and factory logos.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMedia Cleaned:\u003c\/b\u003e Stripped of decades of grime and oxidation to reveal the original high-strength steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHand-Inspected:\u003c\/b\u003e Threads verified crisp and 19mm hex heads checked free of rounding or impact damage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBlack Zinc Finish:\u003c\/b\u003e Corrosion-resistant and more durable than paint or low-grade plating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturers:\u003c\/b\u003e HWE \/ KAMAX (Original German OEM)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread Size:\u003c\/b\u003e 14mm x 1.5\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSeat Profile:\u003c\/b\u003e Ball Seat (Radius) — correct for factory steel wheels\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHex Size:\u003c\/b\u003e 19mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSold As:\u003c\/b\u003e Set of 5 (one wheel)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBoxed Dimensions:\u003c\/b\u003e 4 x 4 x 2 in (approx.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eAre these ball seat or conical?\u003c\/b\u003e Ball seat (radius), engineered for original German steel wheels. If you run aftermarket aluminum wheels, confirm they don't require a 60° conical (tapered) seat before installing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHow many bolts are included?\u003c\/b\u003e Sold as a set of 5 — enough for one wheel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAre these genuine OEM?\u003c\/b\u003e Yes — genuine German OEM bolts with HWE and KAMAX headstamps, restored and refinished.\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cb\u003eDoes this fit a 1971 VW Beetle?\u003c\/b\u003e Yes, on factory ball-seat steel wheels. They are listed for 1968–1979 Beetle and Super Beetle, 1967–1974 Ghia, 1966–1973 Type 3, 1955–1970 Wide-5 Bus and 1973–1974 Thing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWhat is the part number?\u003c\/b\u003e These restored HWE\/KAMAX bolts do not carry a catalog number yet; order by this listing (one set = one wheel).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003e\u003cb\u003eExplore Related Categories\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"\/collections\/wheels\"\u003eWheels\u003c\/a\u003e, \u003ca href=\"\/collections\/hardware\"\u003eHardware\u003c\/a\u003e, \u003ca href=\"\/collections\/all-vw-aircooled\"\u003eAll Air-Cooled VW\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eProp 65 Warning\u003c\/b\u003e\u003c\/h3\u003e\u003cp\u003eWARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.p65warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Washburn's Metal","offers":[{"title":"Default Title","offer_id":44466380341363,"sku":null,"price":22.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/20260306_181342.jpg?v=1774114328"},{"product_id":"restored-genuine-vw-bulten-lug-bolts-14mm-x-1-5-sold-in-packs-of-5","title":"Bulten VW OEM Ball Seat Lug Bolts, Restoration Line — 14mm x 1.5, Black Zinc, Set of 5 | VW Beetle, Ghia, Type 3, Bus \u0026 Thing","description":"\u003ch2\u003e\u003cb\u003eBulten VW OEM Ball Seat Lug Bolts — 14mm x 1.5 (Set of 5)\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cb\u003eShort answer:\u003c\/b\u003e These are genuine VW\/Bulten OEM ball seat lug bolts, 14mm x 1.5 with a 19mm hex, restored in black zinc and sold in packs of 5 (one wheel). They fit factory German steel wheels on the VW Beetle (1968–1979), Super Beetle (1971–1979), Karmann Ghia (1967–1974), Type 3 (1966–1973), Bus (1955–1970) and Thing (1973–1974).\u003c\/p\u003e\n\u003cp\u003eGenuine \u003cb\u003eOEM Volkswagen lug bolts\u003c\/b\u003e featuring the rare and sought-after \u003cb\u003eVW + Bulten headstamps\u003c\/b\u003e. Manufactured by Bulten, a premier Swedish fastener supplier, specifically for Volkswagen's factory production lines — not generic aftermarket hardware.\u003c\/p\u003e\n\u003cp\u003eEach bolt is rescued, meticulously inspected, and refinished in a \u003cb\u003epremium black zinc coating\u003c\/b\u003e for a high-end, period-correct solution for your air-cooled restoration.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eVehicle Fitment\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eVW Beetle:\u003c\/b\u003e 1968–1979\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVW Super Beetle:\u003c\/b\u003e 1971–1979\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVW Karmann Ghia:\u003c\/b\u003e 1967–1974\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVW Type 3 (Fastback, Squareback):\u003c\/b\u003e 1966–1973\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVW Bus (Type 2):\u003c\/b\u003e 1955–1970\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVW Thing:\u003c\/b\u003e 1973–1974\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eKey Features \u0026amp; Benefits\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eGenuine OEM:\u003c\/b\u003e Features the iconic \"V over W\" circle logo and the stylized \"B\" Bulten trademark.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDeep Cleaned:\u003c\/b\u003e Decades of road debris and factory oxidation removed for a clean, smooth surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eStructurally Inspected:\u003c\/b\u003e Every bolt is hand-checked for crisp 19mm hex heads and perfect threads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBlack Zinc Plating:\u003c\/b\u003e Superior corrosion resistance versus paint, highlighting the original factory stampings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e Bulten (Original VW OEM Supplier)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread Size:\u003c\/b\u003e 14mm x 1.5\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSeat Type:\u003c\/b\u003e Ball Seat (Radius) — designed for factory German steel wheels\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHex Size:\u003c\/b\u003e 19mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSold As:\u003c\/b\u003e Pack of 5 (one wheel)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eAre these ball seat or conical?\u003c\/b\u003e Ball seat (radius), designed for factory German steel wheels. If you run aftermarket aluminum wheels (Empi, BRM, etc.), confirm your wheel's seat requirements before ordering, as they often require 60° conical hardware.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHow many bolts are included?\u003c\/b\u003e Sold in packs of 5 — a set for one wheel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAre these genuine OEM?\u003c\/b\u003e Yes — genuine VW OEM bolts with VW and Bulten headstamps, restored and refinished.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDoes this fit a 1970 VW Beetle?\u003c\/b\u003e Yes, on factory steel wheels. They fit the Beetle 1968–1979, Super Beetle 1971–1979, Karmann Ghia 1967–1974, Type 3 1966–1973, Bus 1955–1970 and Thing 1973–1974.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWhat is the part number?\u003c\/b\u003e These restored bolts interchange with VW 251 601 139, the 14mm x 1.5 ball seat lug bolt.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003e\u003cb\u003eExplore Related Categories\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"\/collections\/wheels\"\u003eWheels\u003c\/a\u003e, \u003ca href=\"\/collections\/hardware\"\u003eHardware\u003c\/a\u003e, \u003ca href=\"\/collections\/all-vw-aircooled\"\u003eAll Air-Cooled VW\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eProp 65 Warning\u003c\/b\u003e\u003c\/h3\u003e\u003cp\u003eWARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.p65warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Washburn's Metal","offers":[{"title":"Default Title","offer_id":44466384404595,"sku":null,"price":22.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/20260306_181423.jpg?v=1774114794"},{"product_id":"empi-wheel-lug-bolts-nuts-aftermarket-wheel-hardware-air-cooled-vw","title":"EMPI Wheel Lug Bolts \u0026 Nuts | Air-Cooled VW | Conical, Ball Seat \u0026 Mag Hardware","description":"\u003ch2\u003e\u003cb\u003eEMPI Wheel Lug Bolts \u0026amp; Nuts — Aftermarket Wheel Hardware\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003eWheel lug hardware from EMPI for air-cooled VW and aftermarket wheels. Match the \u003cb\u003eseat type and thread\u003c\/b\u003e to your wheels: \u003cb\u003e60° conical seats\u003c\/b\u003e for most aftermarket alloys and steelies, a \u003cb\u003eball seat\u003c\/b\u003e for 911-style alloys, and \u003cb\u003eacorn\/mag nuts\u003c\/b\u003e for 1\/2-20 stud-mount applications.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eVehicle Fitment\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eVW Beetle:\u003c\/b\u003e All years\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVW Bus:\u003c\/b\u003e All years\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVW Karmann Ghia:\u003c\/b\u003e All years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003e\u003cb\u003eKey Features \u0026amp; Benefits\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCorrect Seat Types:\u003c\/b\u003e 60° conical for most aftermarket alloys and steelies; ball seat for 911-style alloys.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eStud-Mount Options:\u003c\/b\u003e 1\/2-20 acorn and mag nuts for stud-mount applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMultiple Threads \u0026amp; Finishes:\u003c\/b\u003e 12mm and 14mm bolts, plus chrome sets with install tool.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e14mm VW Style Lug Bolt, 17mm Head — Set of 5:\u003c\/b\u003e 70-2863-0\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e12mm-1.5, 60° Bolt, 23mm Thread — Set of 4:\u003c\/b\u003e 70-2706-0\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e14mm-1.5, 60° Bolt, 23mm Thread — Set of 4:\u003c\/b\u003e 70-2707-0\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e14mm-1.5 Ball Seat (911 Alloys), 25mm Thread — Set of 4:\u003c\/b\u003e 70-2708-0\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e1\/2-20 Acorn Nut — Set of 4:\u003c\/b\u003e 70-2704-0\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e1\/2-20 Mag Nut — Set of 4:\u003c\/b\u003e 70-2703-0\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e1\/2\" 60° Chrome w\/Tool, 5x112 — Set of 5:\u003c\/b\u003e 00-9548-0\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e12mm 60° Chrome w\/Tool, 5x112 — Set of 5:\u003c\/b\u003e 00-9549-0\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e14mm 60° Chrome w\/Tool, 5x112 — Set of 5:\u003c\/b\u003e 00-9547-0\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eWhich seat type do aftermarket alloys and steel wheels use?\u003c\/b\u003e Most use a 60° conical seat bolt.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWhich option fits 911-style alloys?\u003c\/b\u003e The 14mm-1.5 ball-seat bolt (25mm thread, 70-2708-0).\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWhat about 1\/2-20 stud-mount wheels?\u003c\/b\u003e Use the 1\/2-20 acorn (70-2704-0) or mag (70-2703-0) nuts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003e\u003cb\u003eExplore Related Categories\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp\u003eBolt it up right: browse all \u003ca href=\"\/collections\/wheels\"\u003eWheels\u003c\/a\u003e, more \u003ca href=\"\/collections\/hardware\"\u003eHardware\u003c\/a\u003e, and the full \u003ca href=\"\/collections\/all-vw-aircooled\"\u003eAir-Cooled VW\u003c\/a\u003e catalog.\u003c\/p\u003e","brand":"EMPI","offers":[{"title":"14mm VW Lug Bolt 17mm Head (Set\/5)","offer_id":45064314355827,"sku":"70-2863-0","price":17.49,"currency_code":"USD","in_stock":true},{"title":"12mm-1.5 60deg 23mm (Set\/4)","offer_id":45064314454131,"sku":"70-2706-0","price":41.96,"currency_code":"USD","in_stock":true},{"title":"14mm-1.5 60deg 23mm (Set\/4)","offer_id":45064314486899,"sku":"70-2707-0","price":41.96,"currency_code":"USD","in_stock":true},{"title":"14mm-1.5 Ball Seat 911 (Set\/4)","offer_id":45064314519667,"sku":"70-2708-0","price":41.96,"currency_code":"USD","in_stock":true},{"title":"1\/2-20 Acorn Nut (Set\/4)","offer_id":45064314552435,"sku":"70-2704-0","price":22.85,"currency_code":"USD","in_stock":true},{"title":"1\/2-20 Mag Nut (Set\/4)","offer_id":45064314585203,"sku":"70-2703-0","price":22.85,"currency_code":"USD","in_stock":true},{"title":"1\/2in 60deg Chrome 5x112 (Set\/5)","offer_id":45064314617971,"sku":"00-9548-0","price":22.42,"currency_code":"USD","in_stock":true},{"title":"12mm 60deg Chrome 5x112 (Set\/5)","offer_id":45064314650739,"sku":"00-9549-0","price":22.85,"currency_code":"USD","in_stock":true},{"title":"14mm 60deg Chrome 5x112 (Set\/5)","offer_id":45064314683507,"sku":"00-9547-0","price":22.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/70-2863-0.jpg?v=1780461956"},{"product_id":"empi-3-wheel-spacers-pair-air-cooled-vw-00-9485-0","title":"EMPI 3\" Wheel Spacers | Air-Cooled VW | Widen Track, Pair (00-9485-0)","description":"\u003ch2\u003e\u003cb\u003eEMPI 3\" Wheel Spacers — Pair (00-9485-0)\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cb\u003e3\" wheel spacers\u003c\/b\u003e from EMPI, sold as a \u003cb\u003epair\u003c\/b\u003e, for air-cooled VW. Widen track width for a wider stance or to gain clearance for brakes and suspension.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eVehicle Fitment\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eVW Beetle:\u003c\/b\u003e All years\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVW Bus:\u003c\/b\u003e All years\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVW Karmann Ghia:\u003c\/b\u003e All years\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eNote:\u003c\/b\u003e Confirm stud length and fitment for your application.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eKey Features \u0026amp; Benefits\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eWider Stance:\u003c\/b\u003e Pushes the wheels out to widen track width.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAdded Clearance:\u003c\/b\u003e Helps clear brake and suspension components.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSold as a Pair:\u003c\/b\u003e Two spacers per set.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eThickness:\u003c\/b\u003e 3\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSold As:\u003c\/b\u003e Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePart Number:\u003c\/b\u003e 00-9485-0\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eHow many spacers come in this listing?\u003c\/b\u003e Two — they are sold as a pair.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWhat are wheel spacers used for?\u003c\/b\u003e Widening track width for a wider stance or to clear brakes and suspension.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAnything to check before ordering?\u003c\/b\u003e Confirm stud length and fitment for your application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003e\u003cb\u003eExplore Related Categories\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp\u003eDial in your stance: browse all \u003ca href=\"\/collections\/wheels\"\u003eWheels\u003c\/a\u003e, more \u003ca href=\"\/collections\/hardware\"\u003eHardware\u003c\/a\u003e, and the full \u003ca href=\"\/collections\/all-vw-aircooled\"\u003eAir-Cooled VW\u003c\/a\u003e catalog.\u003c\/p\u003e","brand":"EMPI","offers":[{"title":"Default Title","offer_id":45064314421363,"sku":"00-9485-0","price":207.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/00-9485-0-scaled.jpg?v=1780461956"},{"product_id":"empi-wheel-adapter-set-5-lug-vw-to-5-x-130-steel-9-5-mm-2-per-set-complete-set-porsche-356-1950-1965-00-9481-0","title":"EMPI Wheel Adapter Set — VW 5-Lug to Porsche 5x130mm, Steel, 9.5mm, 2 per Set | Porsche 356\/356A\/356B\/356C 1950-1965 (00-9481-0)","description":"\u003cp\u003eThe wheels you want wear Porsche's 5x130 pattern; the hubs you have speak VW five-lug, and the two will not meet on their own. These steel adapters, 9.5mm thick and machined hub-centric, translate one pattern to the other so the wheel sits true and centered.\u003c\/p\u003e\u003ch3\u003e\u003cb\u003eFeatures\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSteel wheel adapters converting VW 5-lug to the Porsche 5x130mm bolt pattern\u003c\/li\u003e\n\u003cli\u003e9.5mm thickness, machined for a true, hub-centric fit\u003c\/li\u003e\n\u003cli\u003eTwo adapters per set, enough for one axle\u003c\/li\u003e\n\u003cli\u003eOpens up Porsche 5x130 wheel choices for VW 5-lug builds\u003c\/li\u003e\n\u003cli\u003eGenuine EMPI part\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003e\u003cb\u003eFitment\u003c\/b\u003e\u003c\/h3\u003e\u003cp\u003eFits VW 5-lug hubs on Type 1, 2, and 3, Karmann Ghia, Buggy, and Baja, and suits Porsche 356-series 5x130mm wheel setups. If you are unsure this fits your car, contact us with your year and model before ordering.\u003c\/p\u003e\u003ch3\u003e\u003cb\u003eSpecifications\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart number: 00-9481-0\u003c\/li\u003e\n\u003cli\u003eManufacturer: EMPI\u003c\/li\u003e\n\u003cli\u003eBoxed dimensions: 10 x 10 x 2 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 8.05 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes this fit my Porsche?\u003c\/strong\u003e Yes, if you're running VW 5-lug hubs and want to mount 5x130mm Porsche-pattern wheels. Two adapters cover one axle; order two sets for a full car.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this part?\u003c\/strong\u003e They're 9.5mm steel adapters that bolt to a VW 5-lug hub and provide a Porsche 5x130mm mounting face for the wheel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the part number?\u003c\/strong\u003e EMPI part number 00-9481-0.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does it ship?\u003c\/strong\u003e Ships standard ground from our shop in Orange, California.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow thick are the adapters?\u003c\/strong\u003e Each adapter is 9.5mm thick.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many come in a set?\u003c\/strong\u003e Two adapters per set, enough for one axle. Order two sets for all four wheels.\u003c\/p\u003e\u003ch3\u003e\u003cb\u003eProp 65 Warning\u003c\/b\u003e\u003c\/h3\u003e\u003cp\u003eThis product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"EMPI","offers":[{"title":"Default Title","offer_id":45307950891123,"sku":"00-9481-0","price":88.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/00-9481-0.jpg?v=1785946452"},{"product_id":"empi-wheel-studs-m14-1-5-both-ends-set-of-5-porsche-complete-set-porsche-911-1965-1989-00-9517-0","title":"EMPI Wheel Studs — M14-1.5 Double-Ended, Porsche Thread, Set of 5 | Air-Cooled VW \u0026 Porsche 5-Lug (00-9517-0)","description":"\u003cp\u003eA stud that has stretched or stripped its threads is not a thing to trust to luck at speed. This set of five double-ended studs is cut to the M14-1.5 Porsche thread, threading firm into the hub and standing ready for the lug nut to clamp against.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSet of five wheel studs, threaded on both ends\u003c\/li\u003e\n\u003cli\u003eM14-1.5 Porsche thread pitch\u003c\/li\u003e\n\u003cli\u003eDouble-ended design threads into the hub and accepts the lug nut\u003c\/li\u003e\n\u003cli\u003eThe right replacement for stripped, stretched, or damaged studs\u003c\/li\u003e\n\u003cli\u003eGenuine EMPI part\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Fits air-cooled VW Type 1, Type 3, Karmann Ghia, Buggy, and Baja 5-lug hubs using the M14-1.5 Porsche thread pattern. If you are unsure this fits your car, contact us with your year and model before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: 00-9517-0\u003c\/li\u003e\n\u003cli\u003eManufacturer: EMPI\u003c\/li\u003e\n\u003cli\u003eBoxed dimensions: 6 x 5 x 2 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 0.45 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes this fit my Porsche?\u003c\/strong\u003e Yes, for air-cooled VW 5-lug hubs (Type 1, Type 3, Ghia, Buggy, Baja) that use the M14-1.5 Porsche thread. Confirm your hub thread before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this part?\u003c\/strong\u003e They're double-ended M14-1.5 wheel studs that thread into the hub and provide the stud your lug nut clamps onto.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the part number?\u003c\/strong\u003e EMPI part number 00-9517-0.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does it ship?\u003c\/strong\u003e Ships standard ground from our shop in Orange, California.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 Warning:\u003c\/strong\u003e This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"EMPI","offers":[{"title":"Default Title","offer_id":45307950923891,"sku":"00-9517-0","price":9.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/00-9517-0-scaled.jpg?v=1785946452"},{"product_id":"empi-porsche-style-nut-zinc-m14-1-5-ball-seat-set-of-5-complete-set-porsche-356-911-914-70-2860-0","title":"EMPI Porsche-Style Lug Nut — Zinc, M14-1.5 Ball Seat, Set of 5 | Porsche 356\/911\/914 (70-2860-0)","description":"\u003cp\u003eA ball-seat wheel wants a radiused nut to draw down true and hold, not a taper that never fully beds. This set of five zinc-plated M14-1.5 Porsche-style lug nuts seats correctly against original-style Porsche and VW wheels.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSet of 5 genuine EMPI Porsche-style lug nuts\u003c\/li\u003e\n\u003cli\u003eM14-1.5 thread with a radius ball seat matching factory wheels\u003c\/li\u003e\n\u003cli\u003eZinc plating resists corrosion for a clean, lasting finish\u003c\/li\u003e\n\u003cli\u003eCorrect seat prevents wheels from working loose\u003c\/li\u003e\n\u003cli\u003eEnough to do one wheel on a five-lug hub\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Fits Porsche 356 (1950-1965), 911 (1966-1977), 914 (1969-1976), 924, and VW Transporter T2\/T3 with M14-1.5 ball-seat studs. If you are unsure this fits your car, contact us with your year and model before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: 70-2860-0\u003c\/li\u003e\n\u003cli\u003eManufacturer: EMPI\u003c\/li\u003e\n\u003cli\u003eBoxed dimensions: 6 x 5 x 1 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 0.43 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes this fit my Porsche?\u003c\/strong\u003e It fits M14-1.5 ball-seat hubs on the Porsche 356, 911, 914, 924, and VW Transporter T2\/T3.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this part?\u003c\/strong\u003e A zinc-plated Porsche-style ball-seat lug nut, sold as a set of five to fasten one five-lug wheel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the part number?\u003c\/strong\u003e EMPI part number 70-2860-0.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does it ship?\u003c\/strong\u003e ships standard ground from our Orange, California shop\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 Warning:\u003c\/strong\u003e This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"EMPI","offers":[{"title":"Default Title","offer_id":45307985821811,"sku":"70-2860-0","price":13.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/70-2860-0-scaled.jpg?v=1785946635"},{"product_id":"empi-bulk-porsche-style-nut-zinc-m14-1-5-ball-seat-ea-empi-quality-replacement-porsche-356-911-914-70-2860-7","title":"EMPI Porsche-Style Lug Nut — Zinc, M14-1.5 Ball Seat, Each | Porsche 356\/911\/914 (70-2860-7)","description":"\u003cp\u003eOne nut gone missing should not cost you a full set. This single US-made zinc M14-1.5 ball-seat lug nut cross-references OE N020-112-1, drawing down true against a factory-style wheel.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSold individually so you buy only what you need\u003c\/li\u003e\n\u003cli\u003eMade in the USA to OE reference N020-112-1\u003c\/li\u003e\n\u003cli\u003eM14-1.5 thread with a radius ball seat for factory wheels\u003c\/li\u003e\n\u003cli\u003eZinc plating for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eCorrect seat keeps clamp load true and wheels secure\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Fits Porsche 356 (1950-1965), 911 (1966-1977), 914 (1969-1976), 924, and VW Transporter T2\/T3 with M14-1.5 ball-seat studs. If you are unsure this fits your car, contact us with your year and model before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: 70-2860-7\u003c\/li\u003e\n\u003cli\u003eOE \/ interchange: N020-112-1\u003c\/li\u003e\n\u003cli\u003eManufacturer: EMPI\u003c\/li\u003e\n\u003cli\u003eBoxed dimensions: 2 x 2 x 1 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 0.034 lb\u003c\/li\u003e\n\u003cli\u003eOrigin: Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes this fit my Porsche?\u003c\/strong\u003e It fits M14-1.5 ball-seat hubs on the Porsche 356, 911, 914, 924, and VW Transporter T2\/T3.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this part?\u003c\/strong\u003e A single US-made zinc Porsche-style ball-seat lug nut, cross-referencing OE part N020-112-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the part number?\u003c\/strong\u003e EMPI part number 70-2860-7.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does it ship?\u003c\/strong\u003e ships standard ground from our Orange, California shop\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 Warning:\u003c\/strong\u003e This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"EMPI","offers":[{"title":"Default Title","offer_id":45307985887347,"sku":"70-2860-7","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/70-2860-7.jpg?v=1785946635"},{"product_id":"empi-porsche-style-alloy-lug-nuts-aluminum-black-anodized-set-of-5-black-finish-porsche-911-1965-1989-70-2865-0","title":"EMPI Porsche-Style Alloy Lug Nut — Black Anodized Aluminum, M14-1.5, Set of 5 | Porsche 356\/911\/914 (70-2865-0)","description":"\u003cp\u003eDark hardware at the hub, and a little rotating weight shed while you are at it. This set of five EMPI black anodized aluminum M14-1.5 Porsche-style lug nuts (70-2865-0) pairs a stealth face with light, corrosion-resistant threads.\u003c\/p\u003e\u003ch3\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSet of 5 genuine EMPI Porsche-style alloy lug nuts\u003c\/li\u003e\n\u003cli\u003eMachined aluminum for reduced weight over steel\u003c\/li\u003e\n\u003cli\u003eBlack anodized finish resists corrosion and looks clean\u003c\/li\u003e\n\u003cli\u003eM14-1.5 thread for Porsche-style hubs\u003c\/li\u003e\n\u003cli\u003eEnough to fasten one five-lug wheel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003e\u003cb\u003eFitment\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eConfirmed:\u003c\/b\u003e Porsche 911 (1965–1989) with M14-1.5 Porsche-style hubs\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAlso listed for:\u003c\/b\u003e M14-1.5 Porsche-style hubs on the Porsche 356 and 914 and matching VW applications\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCheck first:\u003c\/b\u003e confirm your hub thread is M14-1.5 and how many lug nuts your wheels take. If you are unsure this fits your car, contact us with your year and model before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003e\u003cb\u003eSpecifications\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003ePart number:\u003c\/b\u003e 70-2865-0\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e EMPI\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread:\u003c\/b\u003e M14-1.5\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial \/ finish:\u003c\/b\u003e aluminum, black anodized\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePack:\u003c\/b\u003e set of 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBoxed dimensions:\u003c\/b\u003e 8 x 6 x 2 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShipping weight:\u003c\/b\u003e 0.3 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eDoes this fit my Porsche?\u003c\/b\u003e It fits M14-1.5 Porsche-style hubs on the Porsche 356, 911, and 914 and matching VW wheels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWhat is this part?\u003c\/b\u003e A black anodized aluminum Porsche-style lug nut, sold as a set of five for one five-lug wheel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWhat is the part number?\u003c\/b\u003e EMPI part number 70-2865-0.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWhat thread are they?\u003c\/b\u003e M14-1.5.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWhat are they made of?\u003c\/b\u003e Machined aluminum with a black anodized finish, lighter than steel lug nuts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHow does it ship?\u003c\/b\u003e Standard ground from our Orange, California shop.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 Warning:\u003c\/strong\u003e This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"EMPI","offers":[{"title":"Default Title","offer_id":45307990245491,"sku":"70-2865-0","price":37.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/70-2865-0.jpg?v=1785946636"},{"product_id":"empi-porsche-style-alloy-lug-nuts-aluminum-chrome-finish-set-of-5-chrome-plated-porsche-911-1965-1989-70-2867-0","title":"EMPI Porsche-Style Alloy Lug Nut — Chrome Aluminum, M14-1.5, Set of 5 | Porsche 356\/911\/914 (70-2867-0)","description":"\u003cp\u003eA bright hub without asking the wheel to carry the weight of steel. This set of five chrome-finish aluminum M14-1.5 Porsche-style lug nuts adds shine while keeping rotating mass down.\u003c\/p\u003e\u003ch3\u003e\u003cb\u003eFeatures\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSet of 5 genuine EMPI Porsche-style alloy lug nuts\u003c\/li\u003e\n\u003cli\u003eMachined aluminum for reduced weight over steel\u003c\/li\u003e\n\u003cli\u003eChrome finish for a bright, polished look\u003c\/li\u003e\n\u003cli\u003eM14-1.5 thread for Porsche-style hubs\u003c\/li\u003e\n\u003cli\u003eEnough to fasten one five-lug wheel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003e\u003cb\u003eFitment\u003c\/b\u003e\u003c\/h3\u003e\u003cp\u003eFits M14-1.5 Porsche-style hubs on air-cooled Porsche 356, 911, and 914 and matching VW applications. If you are unsure this fits your car, contact us with your year and model before ordering.\u003c\/p\u003e\u003ch3\u003e\u003cb\u003eSpecifications\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart number: 70-2867-0\u003c\/li\u003e\n\u003cli\u003eManufacturer: EMPI\u003c\/li\u003e\n\u003cli\u003eBoxed dimensions: 8 x 6 x 2 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 0.275 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes this fit my Porsche?\u003c\/strong\u003e It fits M14-1.5 Porsche-style hubs on the Porsche 356, 911, and 914 and matching VW wheels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this part?\u003c\/strong\u003e A chrome-finish aluminum Porsche-style lug nut, sold as a set of five for one five-lug wheel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the part number?\u003c\/strong\u003e EMPI part number 70-2867-0.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does it ship?\u003c\/strong\u003e Ships standard ground from our Orange, California shop.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat thread are they?\u003c\/strong\u003e M14-1.5.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many lug nuts are in the set?\u003c\/strong\u003e Five, enough to fasten one five-lug wheel.\u003c\/p\u003e\u003ch3\u003e\u003cb\u003eProp 65 Warning\u003c\/b\u003e\u003c\/h3\u003e\u003cp\u003eThis product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"EMPI","offers":[{"title":"Default Title","offer_id":45307990409331,"sku":"70-2867-0","price":35.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/70-2867-0-scaled.jpg?v=1785946636"},{"product_id":"empi-porsche-style-alloy-lug-nuts-steel-with-chrome-finish-set-of-5-chrome-plated-porsche-911-1965-1989-70-2868-0","title":"EMPI Porsche-Style Lug Nut — Chrome Steel, M14-1.5, Set of 5 | Porsche 356\/911\/914 (70-2868-0)","description":"\u003cp\u003eWhen you want the clamp of steel behind a bright face. This set of five chrome-finish steel M14-1.5 Porsche-style lug nuts brings durable holding power and a clean shine to the hub.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSet of 5 genuine EMPI Porsche-style lug nuts\u003c\/li\u003e\n\u003cli\u003eSteel construction for maximum clamp strength\u003c\/li\u003e\n\u003cli\u003eChrome finish for a bright, corrosion-resistant face\u003c\/li\u003e\n\u003cli\u003eM14-1.5 thread for Porsche-style hubs\u003c\/li\u003e\n\u003cli\u003eEnough to fasten one five-lug wheel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Fits M14-1.5 Porsche-style hubs on air-cooled Porsche 356, 911, and 914 and matching VW applications. If you are unsure this fits your car, contact us with your year and model before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: 70-2868-0\u003c\/li\u003e\n\u003cli\u003eManufacturer: EMPI\u003c\/li\u003e\n\u003cli\u003eBoxed dimensions: 8 x 6 x 2 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 0.65 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes this fit my Porsche?\u003c\/strong\u003e It fits M14-1.5 Porsche-style hubs on the Porsche 356, 911, and 914 and matching VW wheels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this part?\u003c\/strong\u003e A chrome-finish steel Porsche-style lug nut, sold as a set of five for one five-lug wheel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the part number?\u003c\/strong\u003e EMPI part number 70-2868-0.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does it ship?\u003c\/strong\u003e ships standard ground from our Orange, California shop\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 Warning:\u003c\/strong\u003e This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"EMPI","offers":[{"title":"Default Title","offer_id":45308015706227,"sku":"70-2868-0","price":25.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/70-2868-0-scaled.jpg?v=1785946636"},{"product_id":"empi-porsche-style-alloy-lug-nuts-chrome-ball-seat-m14-1-5-set-of-5-chrome-plated-porsche-911-1965-1989-70-2882-0","title":"EMPI Porsche-Style Alloy Lug Nut — Chrome, M14-1.5 Ball Seat, Set of 5 | Porsche 356\/911\/914 (70-2882-0)","description":"\u003cp\u003eA ball-seat wheel asks for a radiused seat to draw down true, and this one finishes bright. This set of five chrome M14-1.5 Porsche-style ball-seat alloy lug nuts beds correctly against factory-style wheels.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSet of 5 genuine EMPI Porsche-style alloy lug nuts\u003c\/li\u003e\n\u003cli\u003eM14-1.5 thread with a radius ball seat for factory-style wheels\u003c\/li\u003e\n\u003cli\u003eChrome finish for a bright, corrosion-resistant look\u003c\/li\u003e\n\u003cli\u003eCorrect ball seat keeps clamp load true and wheels tight\u003c\/li\u003e\n\u003cli\u003eEnough to fasten one five-lug wheel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Fits M14-1.5 ball-seat Porsche-style hubs on air-cooled Porsche 356, 911, and 914 and matching VW applications. If you are unsure this fits your car, contact us with your year and model before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: 70-2882-0\u003c\/li\u003e\n\u003cli\u003eManufacturer: EMPI\u003c\/li\u003e\n\u003cli\u003eBoxed dimensions: 6 x 5 x 1 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 0.18 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes this fit my Porsche?\u003c\/strong\u003e It fits M14-1.5 ball-seat hubs on the Porsche 356, 911, and 914 and matching VW wheels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this part?\u003c\/strong\u003e A chrome Porsche-style ball-seat lug nut, sold as a set of five to fasten one five-lug wheel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the part number?\u003c\/strong\u003e EMPI part number 70-2882-0.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does it ship?\u003c\/strong\u003e ships standard ground from our Orange, California shop\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 Warning:\u003c\/strong\u003e This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"EMPI","offers":[{"title":"Default Title","offer_id":45308018065523,"sku":"70-2882-0","price":51.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/70-2882-0.jpg?v=1785946637"},{"product_id":"empi-porsche-style-alloy-lug-nuts-chrome-ball-seat-m14-1-5-bulk-each-chrome-plated-porsche-911-1965-1989-70-2882-7","title":"EMPI Porsche-Style Alloy Lug Nut — Chrome, M14-1.5 Ball Seat, Each | Porsche 356\/911\/914 (70-2882-7)","description":"\u003cp\u003eFill out a set, or replace one nut with the correct radius. This single chrome M14-1.5 Porsche-style ball-seat lug nut draws down true against a factory-style wheel.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSold individually for the exact quantity you need\u003c\/li\u003e\n\u003cli\u003eM14-1.5 thread with a radius ball seat for factory-style wheels\u003c\/li\u003e\n\u003cli\u003eChrome finish for a bright, corrosion-resistant look\u003c\/li\u003e\n\u003cli\u003eCorrect ball seat keeps wheels clamped and secure\u003c\/li\u003e\n\u003cli\u003eMatches the 70-2882-0 five-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Fits M14-1.5 ball-seat Porsche-style hubs on air-cooled Porsche 356, 911, and 914 and matching VW applications. If you are unsure this fits your car, contact us with your year and model before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: 70-2882-7\u003c\/li\u003e\n\u003cli\u003eManufacturer: EMPI\u003c\/li\u003e\n\u003cli\u003eBoxed dimensions: 2 x 2 x 1 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 0.014 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes this fit my Porsche?\u003c\/strong\u003e It fits M14-1.5 ball-seat hubs on the Porsche 356, 911, and 914 and matching VW wheels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this part?\u003c\/strong\u003e A single chrome Porsche-style ball-seat lug nut in M14-1.5.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the part number?\u003c\/strong\u003e EMPI part number 70-2882-7.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does it ship?\u003c\/strong\u003e ships standard ground from our Orange, California shop\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 Warning:\u003c\/strong\u003e This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"EMPI","offers":[{"title":"Default Title","offer_id":45308018098291,"sku":"70-2882-7","price":8.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/70-2882-7-scaled.jpg?v=1785946637"},{"product_id":"empi-porsche-style-alloy-lug-nuts-black-ball-seat-m14-1-5-set-of-5-black-finish-porsche-911-1965-1989-70-2883-0","title":"EMPI Porsche-Style Alloy Lug Nuts, Black — M14x1.5 Ball Seat, Set of 5 | Porsche 911\/912\/914 1965-1989 (70-2883-0)","description":"\u003cp\u003eThere is a quiet honesty to a lug nut that beds without complaint, the torque wrench clicking off clean instead of creeping. Finished in black anodize over alloy, these carry the correct M14x1.5 thread and a ball seat that nestles into a radius-seat wheel, five to the corner.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBlack anodized alloy body for a low-key OE-style finish\u003c\/li\u003e\n\u003cli\u003eM14x1.5 thread, correct for VW\/Porsche wheel studs\u003c\/li\u003e\n\u003cli\u003eBall (radius) seat matches Porsche-style alloy wheel seats\u003c\/li\u003e\n\u003cli\u003eSold as a set of five to do one wheel\u003c\/li\u003e\n\u003cli\u003eGenuine EMPI hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Fits Porsche 911, 912, and 914 wheels that use M14x1.5 studs with a ball\/radius lug seat. If you are unsure this fits your car, contact us with your year and model before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: 70-2883-0\u003c\/li\u003e\n\u003cli\u003eManufacturer: EMPI\u003c\/li\u003e\n\u003cli\u003eBoxed dimensions: 6 x 5 x 1 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 0.18 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes this fit my Porsche?\u003c\/strong\u003e Fits Porsche 911, 912, and 914 running studs with M14x1.5 threads and a ball\/radius seat; confirm your wheel uses a ball seat before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this part?\u003c\/strong\u003e A set of five black anodized alloy lug nuts with a ball (radius) seat, used to bolt Porsche-style alloy wheels onto M14x1.5 studs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the part number?\u003c\/strong\u003e EMPI part number 70-2883-0, sold as a set of five.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does it ship?\u003c\/strong\u003e ships standard ground from our Orange, California shop\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 Warning:\u003c\/strong\u003e This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"EMPI","offers":[{"title":"Default Title","offer_id":45308019277939,"sku":"70-2883-0","price":50.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/70-2883-0.jpg?v=1785946638"},{"product_id":"empi-porsche-style-alloy-lug-nuts-black-ball-seat-m14-1-5-bulk-each-black-finish-porsche-911-1965-1989-70-2883-7","title":"EMPI Porsche-Style Alloy Lug Nut, Black — M14x1.5 Ball Seat, Each | Porsche 911\/912\/914 1965-1989 (70-2883-7)","description":"\u003cp\u003eOne galled nut can sideline an afternoon, and a mismatched replacement offends the eye every time you walk past the wheel. Bought singly, this black anodized alloy nut carries the M14x1.5 thread and ball seat to fall back into ranks with the rest.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSold individually so you replace only what you need\u003c\/li\u003e\n\u003cli\u003eBlack anodized alloy finish to match existing hardware\u003c\/li\u003e\n\u003cli\u003eM14x1.5 thread for VW\/Porsche wheel studs\u003c\/li\u003e\n\u003cli\u003eBall (radius) seat for Porsche-style alloy wheels\u003c\/li\u003e\n\u003cli\u003eGenuine EMPI hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Fits Porsche 911, 912, and 914 wheels that use M14x1.5 studs with a ball\/radius lug seat. If you are unsure this fits your car, contact us with your year and model before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: 70-2883-7\u003c\/li\u003e\n\u003cli\u003eManufacturer: EMPI\u003c\/li\u003e\n\u003cli\u003eBoxed dimensions: 1 x 1 x 1 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 0.014 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes this fit my Porsche?\u003c\/strong\u003e Fits Porsche 911, 912, and 914 running M14x1.5 studs with a ball\/radius seat; match it to your existing nuts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this part?\u003c\/strong\u003e A single black anodized alloy lug nut with a ball (radius) seat for Porsche-style alloy wheels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the part number?\u003c\/strong\u003e EMPI part number 70-2883-7, sold each.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does it ship?\u003c\/strong\u003e ships standard ground from our Orange, California shop\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 Warning:\u003c\/strong\u003e This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"EMPI","offers":[{"title":"Default Title","offer_id":45308019310707,"sku":"70-2883-7","price":10.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/70-2883-7.jpg?v=1785946637"},{"product_id":"empi-porsche-style-alloy-lug-nuts-raw-ball-seat-m14-1-5-set-of-5-complete-set-porsche-911-1965-1989-70-2887-0","title":"EMPI Porsche-Style Alloy Lug Nuts, Raw — M14x1.5 Ball Seat, Set of 5 | Porsche 911\/912\/914 1965-1989 (70-2887-0)","description":"\u003cp\u003eBare alloy under shop light asks to be polished, a blank canvas for anyone who likes their hardware to catch the sun. Raw-finished and cut with the M14x1.5 thread and a ball seat, these five nuts bed into a radius-seat wheel and take a mirror shine as well as you can work them.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRaw bare-alloy finish, ready to polish\u003c\/li\u003e\n\u003cli\u003eM14x1.5 thread for VW\/Porsche wheel studs\u003c\/li\u003e\n\u003cli\u003eBall (radius) seat for Porsche-style alloy wheels\u003c\/li\u003e\n\u003cli\u003eSet of five covers one wheel\u003c\/li\u003e\n\u003cli\u003eGenuine EMPI hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Fits Porsche 911, 912, and 914 wheels that use M14x1.5 studs with a ball\/radius lug seat. If you are unsure this fits your car, contact us with your year and model before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: 70-2887-0\u003c\/li\u003e\n\u003cli\u003eManufacturer: EMPI\u003c\/li\u003e\n\u003cli\u003eBoxed dimensions: 6 x 5 x 1 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 0.18 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes this fit my Porsche?\u003c\/strong\u003e Fits Porsche 911, 912, and 914 running M14x1.5 studs with a ball\/radius seat; confirm your wheel seat type first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this part?\u003c\/strong\u003e A set of five raw-finish alloy lug nuts with a ball (radius) seat for Porsche-style alloy wheels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the part number?\u003c\/strong\u003e EMPI part number 70-2887-0, sold as a set of five.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does it ship?\u003c\/strong\u003e ships standard ground from our Orange, California shop\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 Warning:\u003c\/strong\u003e This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"EMPI","offers":[{"title":"Default Title","offer_id":45308037628019,"sku":"70-2887-0","price":41.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/70-2887-0.jpg?v=1785946667"},{"product_id":"empi-porsche-style-alloy-lug-nuts-raw-ball-seat-m14-1-5-bulk-each-empi-quality-replacement-porsche-911-1965-1989-70-2887-7","title":"EMPI Porsche-Style Alloy Lug Nut, Raw — M14x1.5 Ball Seat, Each | Porsche 911\/912\/914 1965-1989 (70-2887-7)","description":"\u003cp\u003eLost one lug nut, or rounded one off with the wrong socket? This \u003cb\u003eEMPI 70-2887-7\u003c\/b\u003e is a single raw, bare-alloy Porsche-style lug nut with an \u003cb\u003eM14x1.5 thread\u003c\/b\u003e and a \u003cb\u003eball (radius) seat\u003c\/b\u003e, sold each so you can fill out a set without buying a full kit. The raw finish is ready to polish to match the rest.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSold individually to fill out a set\u003c\/li\u003e\n\u003cli\u003eRaw bare-alloy finish, ready to polish\u003c\/li\u003e\n\u003cli\u003eM14x1.5 thread for VW\/Porsche wheel studs\u003c\/li\u003e\n\u003cli\u003eBall (radius) seat for Porsche-style alloy wheels\u003c\/li\u003e\n\u003cli\u003eGenuine EMPI hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eFitment\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCONFIRMED:\u003c\/b\u003e Porsche 911, 912 and 914 wheels that use M14x1.5 studs with a ball\/radius lug seat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNOT CONFIRMED:\u003c\/b\u003e wheels with a conical (60-degree) or flat seat. Match the seat to your existing nuts, and if you are unsure, contact us with your year, model and wheel before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eSpecifications\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePart number: 70-2887-7\u003c\/li\u003e\n\u003cli\u003eManufacturer: EMPI\u003c\/li\u003e\n\u003cli\u003eThread: M14x1.5\u003c\/li\u003e\n\u003cli\u003eSeat: ball (radius)\u003c\/li\u003e\n\u003cli\u003eFinish: raw alloy\u003c\/li\u003e\n\u003cli\u003eSold: each\u003c\/li\u003e\n\u003cli\u003eBoxed dimensions: 2 x 2 x 1 in\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eDoes this fit my Porsche?\u003c\/b\u003e Fits Porsche 911, 912, and 914 running M14x1.5 studs with a ball\/radius seat; match to your existing nuts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWhat is this part?\u003c\/b\u003e A single raw-finish alloy lug nut with a ball (radius) seat for Porsche-style alloy wheels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eIs it sold as a set?\u003c\/b\u003e No. It is sold each, so you can replace one lost or damaged nut or order the exact count you need.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWhat is the part number?\u003c\/b\u003e EMPI part number 70-2887-7, sold each.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHow does it ship?\u003c\/b\u003e Ships standard ground from our Orange, California shop.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 Warning:\u003c\/strong\u003e This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003c\/p\u003e\n","brand":"EMPI","offers":[{"title":"Default Title","offer_id":45308037955699,"sku":"70-2887-7","price":10.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/70-2887-7.jpg?v=1785946667"},{"product_id":"empi-porsche-alloy-lugs-5-17-empi-quality-replacement-porsche-911-1965-1989-78-2869-0","title":"EMPI Porsche-Style Alloy Lug Nuts — Set of 5 | Porsche 911\/912\/914 1965-1989 (78-2869-0)","description":"\u003cp\u003eFresh Porsche-style alloys deserve nuts that look like they were always meant to be there, not an afterthought from the parts bin. This set of five alloy lug nuts finishes a single wheel with the understated, factory-correct face the design intends.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAlloy construction for Porsche-style wheels\u003c\/li\u003e\n\u003cli\u003eSold as a set of five to cover one wheel\u003c\/li\u003e\n\u003cli\u003eFactory-style appearance\u003c\/li\u003e\n\u003cli\u003eGenuine EMPI hardware\u003c\/li\u003e\n\u003cli\u003eCommon replacement for lost or damaged nuts\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Fits Porsche 911, 912, and 914 alloy wheels using the standard Porsche-style lug nut. If you are unsure this fits your car, contact us with your year and model before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: 78-2869-0\u003c\/li\u003e\n\u003cli\u003eManufacturer: EMPI\u003c\/li\u003e\n\u003cli\u003eBoxed dimensions: 8 x 6 x 2 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 0.16 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes this fit my Porsche?\u003c\/strong\u003e Fits Porsche 911, 912, and 914 alloy wheels using Porsche-style lug nuts; confirm your wheel's thread and seat before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this part?\u003c\/strong\u003e A set of five Porsche-style alloy lug nuts used to mount alloy wheels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the part number?\u003c\/strong\u003e EMPI part number 78-2869-0, sold as a set of five.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does it ship?\u003c\/strong\u003e ships standard ground from our Orange, California shop\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 Warning:\u003c\/strong\u003e This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"EMPI","offers":[{"title":"Default Title","offer_id":45308037988467,"sku":"78-2869-0","price":62.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/78-2869-0-scaled.jpg?v=1785946668"},{"product_id":"empi-porsche-alloy-lug-nuts-m14-x-1-5-ball-seat-chrome-aluminum-set-of-5-chrome-plated-porsche-911-1965-1989-78-2871-0","title":"EMPI Porsche-Style Alloy Lug Nuts, Chrome — M14x1.5 Ball Seat, Set of 5 | Porsche 911\/912\/914 1965-1989 (78-2871-0)","description":"\u003cp\u003eChrome catches the eye first, but only if it still beds true behind the shine. These chrome-finished aluminum nuts pair a bright face with the correct M14x1.5 thread and a ball seat that holds torque against a radius-seat wheel, five to the corner.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eChrome-finished aluminum for a bright look\u003c\/li\u003e\n\u003cli\u003eM14x1.5 thread for VW\/Porsche wheel studs\u003c\/li\u003e\n\u003cli\u003eBall (radius) seat for Porsche-style alloy wheels\u003c\/li\u003e\n\u003cli\u003eSet of five covers one wheel\u003c\/li\u003e\n\u003cli\u003eGenuine EMPI hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Fits Porsche 911, 912, and 914 wheels that use M14x1.5 studs with a ball\/radius lug seat. If you are unsure this fits your car, contact us with your year and model before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: 78-2871-0\u003c\/li\u003e\n\u003cli\u003eManufacturer: EMPI\u003c\/li\u003e\n\u003cli\u003eBoxed dimensions: 8 x 6 x 2 in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 0.275 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes this fit my Porsche?\u003c\/strong\u003e Fits Porsche 911, 912, and 914 running M14x1.5 studs with a ball\/radius seat; confirm your wheel seat type first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is this part?\u003c\/strong\u003e A set of five chrome-finished aluminum lug nuts with a ball (radius) seat for Porsche-style alloy wheels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the part number?\u003c\/strong\u003e EMPI part number 78-2871-0, sold as a set of five.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does it ship?\u003c\/strong\u003e ships standard ground from our Orange, California shop\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 Warning:\u003c\/strong\u003e This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"EMPI","offers":[{"title":"Default Title","offer_id":45308038283379,"sku":"78-2871-0","price":64.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/78-2871-0_LIF-scaled.jpg?v=1785946700"},{"product_id":"empi-chrome-lug-bolts-ball-seat-22mm-head-air-cooled-vw-00-9564-9565-9568","title":"EMPI Chrome Lug Bolts | Air-Cooled VW | Ball Seat, 22mm Head | M12 or M14 (00-9564-0 \/ 00-9565-0 \/ 00-9568-0)","description":"\u003ch2\u003e\u003cb\u003eEMPI Chrome Lug Bolts — Ball Seat, 22mm Head | Air-Cooled VW\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003eBright chrome replacement lug bolts with the \u003cb\u003efactory ball seat and a 22mm head\u003c\/b\u003e, offered in three sizes so you can match the thread and length your wheels actually need. These are the correct seat profile for stock VW steel wheels and for aftermarket wheels machined with a radiused seat — the same geometry the car left the factory with.\u003c\/p\u003e\n\u003cp\u003eLug bolts are the one fastener on a VW that nobody notices until they matter enormously. Original bolts rust, the chrome flakes, the heads round off under a cheap lug wrench, and the seats wear until the wheel no longer centres properly. A fresh set is inexpensive insurance and, on a car with new wheels or a fresh paint job, it is the detail that finishes the corner.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eRead This First — Seat Profile and Length\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp\u003eTwo things decide whether a lug bolt is correct for your car, and neither is the year:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eSeat profile.\u003c\/b\u003e These are \u003cb\u003eball (radiused) seat\u003c\/b\u003e bolts. If your wheels have a 60° tapered seat — most modern aftermarket and EMPI custom wheels do — you need the taper-seat bolts (EMPI 00-9711-0 \/ 00-9712-0) instead. Mixing seat profiles is genuinely dangerous: the bolt cannot clamp evenly and the wheel can work loose.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLength.\u003c\/b\u003e Thread engagement must be sufficient without the bolt bottoming out or protruding into the brake. Adding wheel spacers means you need longer bolts. Always test-fit one corner and check clearance behind the drum or rotor before torquing all four wheels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eChoose Your Size\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eM12 x 1.5, 15mm long, Set of 5:\u003c\/b\u003e For steel wheels. The short option — use where the wheel's mounting face is thin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eM12 x 1.5, 20mm long, Set of 5:\u003c\/b\u003e For steel or aluminum wheels needing a little more reach.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eM14 x 1.5, 20.5mm long, Set of 4:\u003c\/b\u003e The 14mm thread size, sold as a set of four for 4-lug applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003ePart Numbers:\u003c\/b\u003e 00-9564-0 (M12, 15mm) \/ 00-9565-0 (M12, 20mm) \/ 00-9568-0 (M14, 20.5mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e EMPI\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSeat:\u003c\/b\u003e Ball \/ radiused\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHead:\u003c\/b\u003e 22mm hex\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish:\u003c\/b\u003e Chrome\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShipping Weight:\u003c\/b\u003e 0.87 lb \/ 0.89 lb \/ 0.75 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePackage Dimensions:\u003c\/b\u003e 4 x 2.5 x 1.25 in \/ 3 x 3 x 1.25 in \/ 3 x 2.25 x 1 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUPC:\u003c\/b\u003e 707924341270 \/ 707924341294 \/ 707924341331\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eInstallation Notes\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCheck clearance before you commit.\u003c\/b\u003e Fit one bolt, spin the wheel, and confirm nothing touches inside the drum or caliper.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eA light anti-seize on the threads only\u003c\/b\u003e — never on the seat. Grease on the seat falsifies your torque reading.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTorque in a star pattern\u003c\/b\u003e and re-check after roughly 50 miles. New bolts bed in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCount your bolts.\u003c\/b\u003e A 4-lug car needs 16, a 5-lug car needs 20 — order sets accordingly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eBall seat or taper seat — how do I tell?\u003c\/b\u003e Look at the seat on your existing bolt and the wheel's bolt hole. A ball seat is a smooth radius; a taper seat is a straight 60° cone. They must match the wheel, and these are ball seat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHow many sets do I need?\u003c\/b\u003e A 4-lug car takes 16 bolts, a 5-lug car takes 20. The M12 options ship 5 per set; the M14 option ships 4 per set.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eI am running spacers — which length?\u003c\/b\u003e Longer than stock, and verified by test-fit. For substantial spacers see the long 12mm bolts, EMPI 70-2875-0.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWill these fit EMPI custom wheels?\u003c\/b\u003e Usually not — most EMPI wheels use a 60° taper seat and take 00-9711-0 or 00-9712-0.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eIs chrome durable enough for a driver?\u003c\/b\u003e Yes for normal road use. In heavy winter salt, expect chrome lug bolts to need attention sooner than plated steel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\u003cp\u003e\u003cb\u003eWARNING:\u003c\/b\u003e This product can expose you to chemicals which are known to the State of California to cause cancer and reproductive harm. For more information, go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" rel=\"noopener\" target=\"_blank\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e. All parts legal for use on pre-pollution controlled vehicles only.\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003ch3\u003e\u003cb\u003eExplore Related Categories\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp\u003eFinishing a set of wheels? Browse \u003ca href=\"\/collections\/wheels\"\u003eWheels, Tires \u0026amp; Lug Hardware\u003c\/a\u003e and \u003ca href=\"\/collections\/hardware\"\u003eHardware \u0026amp; Fasteners\u003c\/a\u003e.\u003c\/p\u003e","brand":"EMPI","offers":[{"title":"M12x1.5, 15mm — Set of 5","offer_id":45481340174451,"sku":"00-9564-0","price":28.31,"currency_code":"USD","in_stock":true},{"title":"M12x1.5, 20mm — Set of 5","offer_id":45481340207219,"sku":"00-9565-0","price":23.59,"currency_code":"USD","in_stock":true},{"title":"M14x1.5, 20.5mm — Set of 4","offer_id":45481340239987,"sku":"00-9568-0","price":21.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/empi-00-9564-0-chrome-lug-bolts-ball-seat-m12-15mm.jpg?v=1789191759"},{"product_id":"empi-chrome-lug-bolts-60-degree-taper-seat-aftermarket-wheels-00-9711-00-9712","title":"EMPI Chrome Lug Bolts | 60° Taper Seat for EMPI \u0026 Aftermarket Wheels | 12mm or 14mm (00-9711-0 \/ 00-9712-0)","description":"\u003ch2\u003e\u003cb\u003eEMPI Chrome Lug Bolts — 60° Taper Seat | For EMPI \u0026amp; Aftermarket Custom Wheels\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003eChrome lug bolts with a \u003cb\u003e60° tapered seat\u003c\/b\u003e, the profile used by most modern EMPI wheels and by the wider aftermarket. If you have just fitted a set of custom wheels to an air-cooled VW, these — not your old factory bolts — are almost certainly what the wheels need.\u003c\/p\u003e\n\u003cp\u003eThis is the single most common wheel-fitting mistake on an air-cooled VW. Factory VW bolts use a rounded ball seat; most aftermarket wheels are machined with a straight 60° cone. Put a ball-seat bolt into a taper-seat wheel and the two surfaces touch on a narrow ring instead of a broad cone. The joint feels tight, torques up normally, and then loosens, because there is almost no clamp area doing the work. It is worth thirty seconds with a flashlight to confirm which seat your wheels have.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eVehicle Fitment\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEMPI custom wheels\u003c\/b\u003e and most aftermarket wheels machined with a 60° taper seat\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAir-cooled VW:\u003c\/b\u003e Beetle, Super Beetle, Karmann Ghia, Bus, Type 3, Thing\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDune buggy, Baja \u0026amp; sandrail\u003c\/b\u003e builds on custom wheels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eWill NOT fit:\u003c\/b\u003e stock VW steel wheels and any wheel with a ball (radiused) seat — use EMPI 00-9564-0 \/ 00-9565-0 \/ 00-9568-0 instead.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eChoose Your Size\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e12mm, Set of 5 — for EMPI 5x205 wheels:\u003c\/b\u003e The wide-5 bolt pattern used on early Beetle, Bus and Type 3 hubs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e14mm, Set of 4 — for EMPI 4x130 wheels:\u003c\/b\u003e The later 4-lug pattern.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003ePart Numbers:\u003c\/b\u003e 00-9711-0 (12mm, 5x205) \/ 00-9712-0 (14mm, 4x130)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eManufacturer:\u003c\/b\u003e EMPI\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSeat:\u003c\/b\u003e 60° taper\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHead:\u003c\/b\u003e 19mm hex\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThreaded Length:\u003c\/b\u003e 24mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish:\u003c\/b\u003e Chrome\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShipping Weight:\u003c\/b\u003e 1.00 lb (12mm) \/ 0.85 lb (14mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePackage Dimensions:\u003c\/b\u003e 6 x 6 x 1.18 in (12mm) \/ 3 x 2.5 x 1 in (14mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUPC:\u003c\/b\u003e 707924408683 \/ 707924408676\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eInstallation Notes\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eConfirm the seat profile\u003c\/b\u003e against your wheel before ordering. This is the whole ballgame.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCheck clearance\u003c\/b\u003e behind the drum or rotor with one bolt fitted before doing all four corners.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAnti-seize on threads only,\u003c\/b\u003e never the seat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTorque in a star pattern,\u003c\/b\u003e then re-check after about 50 miles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRunning spacers?\u003c\/b\u003e You will need extra length — see the long 12mm taper bolts, EMPI 70-2875-0.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eHow do I confirm my wheels are taper seat?\u003c\/b\u003e Look into the bolt hole. A 60° taper is a straight-sided cone; a ball seat is a smooth radius. If the wheels are EMPI or another modern aftermarket brand, taper is the likely answer — but check.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCan I reuse my factory bolts on new wheels?\u003c\/b\u003e Only if the wheels are ball seat. Mismatched seats will not stay tight.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHow many do I need?\u003c\/b\u003e 20 for a 5-lug car, 16 for a 4-lug car.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWhat head size is the wrench?\u003c\/b\u003e 19mm hex — note that this differs from the 22mm head on the ball-seat bolts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDo these work with wheel spacers?\u003c\/b\u003e Only short ones. Anything substantial needs longer bolts and a test fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\u003cp\u003e\u003cb\u003eWARNING:\u003c\/b\u003e This product can expose you to chemicals which are known to the State of California to cause cancer and reproductive harm. For more information, go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" rel=\"noopener\" target=\"_blank\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e. All parts legal for use on pre-pollution controlled vehicles only.\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003ch3\u003e\u003cb\u003eExplore Related Categories\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp\u003eFinishing a set of wheels? Browse \u003ca href=\"\/collections\/wheels\"\u003eWheels, Tires \u0026amp; Lug Hardware\u003c\/a\u003e and \u003ca href=\"\/collections\/hardware\"\u003eHardware \u0026amp; Fasteners\u003c\/a\u003e.\u003c\/p\u003e","brand":"EMPI","offers":[{"title":"12mm — Set of 5 (5x205)","offer_id":45481340338291,"sku":"00-9711-0","price":23.59,"currency_code":"USD","in_stock":true},{"title":"14mm — Set of 4 (4x130)","offer_id":45481340371059,"sku":"00-9712-0","price":23.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/empi-00-9711-0-chrome-lug-bolts-60-degree-12mm.jpg?v=1789191760"},{"product_id":"king-performance-titanium-lug-nuts-m14x1-5-45mm","title":"King Performance Titanium Lug Nuts M14 x 1.5 | Set of 20 | 45mm, 33mm \u0026 20mm | Wide-5 VW, Buggy \u0026 Sand Rail | Raw or Black PVD","description":"\u003cp\u003e\u003cstrong\u003eKing Performance forged titanium lug nuts\u003c\/strong\u003e are the lightest, cleanest way to finish off a set of wheels on a hot-rodded air-cooled VW, dune buggy, sand rail or any build running \u003cstrong\u003eM14 x 1.5 wheel studs\u003c\/strong\u003e. Each nut is hot-forged from aerospace-grade \u003cstrong\u003eTi6Al-4V (Grade 5) titanium\u003c\/strong\u003e, CNC-machined, and finished with rolled threads and a knurled grip — about half the weight of a steel lug nut, and it will never rust. Available in \u003cstrong\u003e45 mm, 33 mm and 20 mm\u003c\/strong\u003e lengths to suit your studs and wheels.\u003c\/p\u003e\n\u003cp\u003eSold as a \u003cstrong\u003eset of 20\u003c\/strong\u003e — five per wheel for a four-wheel wide-five setup. Choose your length — \u003cstrong\u003e45 mm open-end\u003c\/strong\u003e (for long studs), \u003cstrong\u003e45 mm closed-end\u003c\/strong\u003e (a capped, finished look), \u003cstrong\u003e33 mm closed-end\u003c\/strong\u003e or the short \u003cstrong\u003e20 mm open-end\u003c\/strong\u003e — in \u003cstrong\u003eraw titanium\u003c\/strong\u003e or \u003cstrong\u003eblack PVD\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eWhich length do I need?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e45 mm\u003c\/strong\u003e — long or race studs, thick alloy wheels, spacers. Open-end lets the stud pass through; closed-end caps it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e33 mm closed-end\u003c\/strong\u003e — a mid-length capped nut for standard-length studs. Make sure your studs are short enough not to bottom out inside it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e20 mm open-end\u003c\/strong\u003e — a short, low-profile nut for tight clearance; longer studs can pass through it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhatever length you choose, make sure the nut gets \u003cstrong\u003efull thread engagement\u003c\/strong\u003e — as a rule of thumb at least as many millimetres of thread as the stud diameter (14 mm). If you are unsure, tell us your stud length and wheel and we will recommend one.\u003c\/p\u003e\n\n\u003ch3\u003eWhy titanium lug nuts?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight:\u003c\/strong\u003e 31.7 g per 45 mm open-end nut — roughly 45–50% lighter than a comparable steel nut, taking weight off the rotating, unsprung mass at every corner.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrong:\u003c\/strong\u003e Ti6Al-4V rated at 138,000 psi (951 MPa) ultimate tensile strength and 128,000 psi (883 MPa) yield.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorrosion-proof:\u003c\/strong\u003e titanium does not rust — ideal for buggies and sand cars that see water, salt and sand.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRolled threads, not cut:\u003c\/strong\u003e better fatigue resistance and less galling than cut threads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnti-slip knurled head\u003c\/strong\u003e for easy hand-starting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack PVD option:\u003c\/strong\u003e a hard physical-vapor-deposition coating for a stealth look that holds up better than paint or anodizing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits any wheel stud with \u003cstrong\u003eM14 x 1.5 metric thread\u003c\/strong\u003e that accepts a \u003cstrong\u003e19 mm hex\u003c\/strong\u003e lug nut, including:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAir-cooled VW Beetle, Bus, Ghia and Type 3 running \u003cstrong\u003ewide-five or 5-lug stud conversions\u003c\/strong\u003e (stock VW uses lug \u003cem\u003ebolts\u003c\/em\u003e, not nuts)\u003c\/li\u003e\n\u003cli\u003eDune buggies, Meyers Manx-style buggies, Baja Bugs and sand rails on M14 x 1.5 studs\u003c\/li\u003e\n\u003cli\u003eStreet, performance and modified vehicles with M14 x 1.5 studs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBefore you order, confirm two things:\u003c\/strong\u003e (1) your studs are M14 x 1.5 — not 1\/2\"-20 or M12 x 1.5; and (2) the lug seat on your wheels matches these nuts. A lug nut with the wrong seat will not clamp the wheel correctly. Not sure? Send us your wheel brand and model and we will confirm fit before we ship.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eKing Performance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eForged Ti6Al-4V (Grade 5) aerospace titanium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread\u003c\/td\u003e\n\u003ctd\u003eM14 x 1.5, 6H precision, rolled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall length\u003c\/td\u003e\n\u003ctd\u003e45 mm, 33 mm or 20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHex \/ socket size\u003c\/td\u003e\n\u003ctd\u003e19 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStyles\u003c\/td\u003e\n\u003ctd\u003e45 mm open-end, 45 mm closed-end, 33 mm closed-end, 20 mm open-end\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinishes\u003c\/td\u003e\n\u003ctd\u003eRaw titanium or black PVD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight per nut (45 mm)\u003c\/td\u003e\n\u003ctd\u003e31.7 g open-end \/ 34.2 g closed-end\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUltimate tensile strength\u003c\/td\u003e\n\u003ctd\u003e138,000 psi \/ 951 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eYield strength\u003c\/td\u003e\n\u003ctd\u003e128,000 psi \/ 883 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003eSet of 20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eUse a properly fitting \u003cstrong\u003e19 mm socket\u003c\/strong\u003e for installation and removal. Tighten lug nuts evenly to the correct torque specification. \u003cstrong\u003eDo not over-tighten or use excessive force\u003c\/strong\u003e — this can damage the threads or the lug nut. Always confirm the correct wheel-stud thread size and torque specification for your vehicle and wheel before installing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e⚠ WARNING — TITANIUM LUG NUTS: Failure to follow these instructions can leave wheels loose, cause component failure, or lead to loss of vehicle control, resulting in serious injury or death.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHand tools only — never use an impact wrench\u003c\/strong\u003e to tighten or loosen. Impact tools can gall, strip or crack titanium threads. Start every nut by hand and snug with a 19 mm socket.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnti-seize is required.\u003c\/strong\u003e Apply a thin layer of high-quality copper- or nickel-based anti-seize to the threads to prevent galling and seizing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTorque with a calibrated torque wrench\u003c\/strong\u003e to your vehicle or wheel manufacturer's specification, in a star pattern.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRe-torque after the first 50–100 miles\u003c\/strong\u003e and after every track or off-road event.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow many lug nuts come in a set?\u003c\/strong\u003e\u003cbr\u003e20 — five per wheel for four wide-five wheels.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill these fit my stock VW Beetle?\u003c\/strong\u003e\u003cbr\u003eOnly if it has been converted to wheel studs. Stock air-cooled VWs use M14 x 1.5 lug \u003cem\u003ebolts\u003c\/em\u003e threaded into the drum or hub. These nuts are for M14 x 1.5 \u003cem\u003estuds\u003c\/em\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat lengths are available?\u003c\/strong\u003e\u003cbr\u003e45 mm open-end, 45 mm closed-end, 33 mm closed-end and 20 mm open-end — all M14 x 1.5 with a 19 mm hex.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOpen-end or closed-end?\u003c\/strong\u003e\u003cbr\u003eOpen-end lets long studs pass through — the usual choice for race and extended studs. Closed-end caps the stud for a clean, finished look but needs enough depth for your stud length.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat socket do I need?\u003c\/strong\u003e\u003cbr\u003e19 mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use an impact gun?\u003c\/strong\u003e\u003cbr\u003eNo. Impact tools can gall, strip or crack titanium threads. Use hand tools and a calibrated torque wrench, with copper- or nickel-based anti-seize on the threads.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre titanium lug nuts strong enough?\u003c\/strong\u003e\u003cbr\u003eYes. Grade 5 titanium is rated at 138,000 psi tensile — comparable to high-grade steel at about half the weight.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eOff-highway use only\u003c\/strong\u003e (per King Performance).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e⚠ WARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"King Performance","offers":[{"title":"45mm Open-End \/ Raw Titanium","offer_id":48379131723891,"sku":"KP-TLN-M14-OE45-RAW","price":295.0,"currency_code":"USD","in_stock":true},{"title":"45mm Open-End \/ Black PVD","offer_id":48379131756659,"sku":"KP-TLN-M14-OE45-BLK","price":295.0,"currency_code":"USD","in_stock":true},{"title":"45mm Closed-End \/ Raw Titanium","offer_id":48379131789427,"sku":"KP-TLN-M14-CE45-RAW","price":295.0,"currency_code":"USD","in_stock":true},{"title":"45mm Closed-End \/ Black PVD","offer_id":48379131822195,"sku":"KP-TLN-M14-CE45-BLK","price":295.0,"currency_code":"USD","in_stock":true},{"title":"33mm Closed-End \/ Raw Titanium","offer_id":48379176386675,"sku":"KP-TLN-M14-33-RAW","price":295.0,"currency_code":"USD","in_stock":true},{"title":"33mm Closed-End \/ Black PVD","offer_id":48379176419443,"sku":"KP-TLN-M14-33-BLK","price":295.0,"currency_code":"USD","in_stock":true},{"title":"20mm Open-End \/ Raw Titanium","offer_id":48379176452211,"sku":"KP-TLN-M14-20-RAW","price":285.0,"currency_code":"USD","in_stock":true},{"title":"20mm Open-End \/ Black PVD","offer_id":48379176484979,"sku":"KP-TLN-M14-20-BLK","price":285.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/king-titanium-lug-nut-m14x1-5-45mm-open-end.webp?v=1789850219"},{"product_id":"empi-chrome-lug-nuts-m14-x-1-5-60-degree-acorn-set-of-4-vw-stud-conversion-00-9519-0","title":"EMPI Chrome Lug Nuts — M14 x 1.5, 60° Acorn Seat, Set of 4 | VW Stud-Conversion \u0026 Dune Buggy Wheels (00-9519-0)","description":"\u003ch2\u003e\u003cb\u003eEMPI Chrome Lug Nuts — M14 x 1.5, 60° Acorn Seat, Set of 4 (00-9519-0)\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003eOnce you have converted a VW to wheel studs, whether for easier wheel changes, a buggy, or aftermarket rims, you need nuts that match both the thread and the wheel seat. EMPI \u003cb\u003e00-9519-0\u003c\/b\u003e is a set of \u003cb\u003efour chrome M14 x 1.5 acorn lug nuts with a 60° conical seat\u003c\/b\u003e, the seat most aftermarket steel and alloy wheels use.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eKey Features \u0026amp; Benefits\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eM14 x 1.5 thread:\u003c\/b\u003e matches EMPI and other M14 VW stud conversions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e60° conical (acorn) seat:\u003c\/b\u003e centers aftermarket wheels that are cut for a tapered nut.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eClosed-end acorn style:\u003c\/b\u003e the chrome cap covers the stud end and keeps the threads clean.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eChrome finish:\u003c\/b\u003e looks right on bare steel wheels and polished rims.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGenuine EMPI:\u003c\/b\u003e  sold by Washburn's Metal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eFitment\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eUniversal to M14 x 1.5 wheel studs with 60° conical-seat wheels.\u003c\/b\u003e The EMPI price file gives no vehicle fitment for this part. Stock air-cooled VWs use lug bolts, so these nuts only fit once the car has studs.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCONFIRMED (EMPI):\u003c\/b\u003e M14 x 1.5 thread, 60° acorn seat, set of 4.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNOT CONFIRMED (depends on your conversion):\u003c\/b\u003e Beetle, Super Beetle, Karmann Ghia, Type 3 and Bus with M14 x 1.5 stud conversions (dealer-listed by JBugs), and dune buggies and sand rails on VW drums or hubs with M14 studs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDoes not fit:\u003c\/b\u003e stock VW lug-bolt hubs without studs, 12 mm or 1\/2-20 studs (see EMPI 00-9537-0 \/ 00-9535-0), ball-seat VW or Porsche wheels, and flat-seat mag wheels (they need a mag nut with a shank).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003ePart Number:\u003c\/b\u003e EMPI 00-9519-0\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eQuantity:\u003c\/b\u003e 4 lug nuts\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread:\u003c\/b\u003e M14 x 1.5\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSeat:\u003c\/b\u003e 60° conical (acorn)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHex:\u003c\/b\u003e 13\/16 in \/ ~21 mm (dealer-listed)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall Height:\u003c\/b\u003e ~1.45 in; thread depth ~1.25 in (dealer-listed)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish:\u003c\/b\u003e Chrome-plated steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInterchange #:\u003c\/b\u003e 00-9519-7 (single), AC6015408\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUPC:\u003c\/b\u003e 707924416596\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCountry of Origin:\u003c\/b\u003e China\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShipping Weight:\u003c\/b\u003e 0.47 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePackage Dimensions:\u003c\/b\u003e 6 x 5 x 1 in\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eInstallation Notes\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCheck the seat first. Hold a nut in a lug hole, and the wheel needs a matching 60° taper. Wrong-seat nuts will loosen.\u003c\/li\u003e\n\u003cli\u003eStart every nut by hand, then snug them in a star pattern with the wheel off the ground.\u003c\/li\u003e\n\u003cli\u003eTorque to the wheel maker's spec on the ground, again in a star pattern, and re-check after the first 50 miles.\u003c\/li\u003e\n\u003cli\u003eMake sure the stud reaches at least as many threads as its diameter (14 mm) of engagement. If it does not, the stud is too short for this wheel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eWill these fit my stock 1970 VW Beetle?\u003c\/b\u003e Not on their own. A stock Beetle uses lug BOLTS that thread into the drum. These are NUTS for M14 x 1.5 wheel studs, so they fit after a stud conversion (for example EMPI 00-9517-0 studs) with wheels that have a 60° conical seat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWhat seat do they have?\u003c\/b\u003e A 60° conical (acorn\/taper) seat, the kind used on most aftermarket steel and alloy wheels. They are not for VW ball-seat (radius) wheels or flat mag-seat wheels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWhat is the part number?\u003c\/b\u003e EMPI 00-9519-0, a set of 4. UPC 707924416596. Singles are EMPI 00-9519-7 (interchange AC6015408).\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHow many do I need?\u003c\/b\u003e A 4-lug car needs 16, so four sets. A 5-lug car needs 20, so buy five sets, or look at EMPI's 5-piece sets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWhat socket do they take?\u003c\/b\u003e 13\/16 in (about 21 mm), dealer-listed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHow does it ship?\u003c\/b\u003e As a small parcel (6 x 5 x 1 in, 0.47 lb). It is not hazmat and has no ground-only restriction.\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003e\u003cb\u003eExplore Related Categories\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp\u003eConverting to studs? See \u003ca href=\"\/products\/empi-wheel-studs-m14-1-5-both-ends-set-of-5-porsche-complete-set-porsche-911-1965-1989-00-9517-0\"\u003eEMPI M14 x 1.5 Wheel Studs (00-9517-0)\u003c\/a\u003e and the \u003ca href=\"\/products\/empi-wheel-lug-bolts-nuts-aftermarket-wheel-hardware-air-cooled-vw\"\u003eEMPI Wheel Lug Bolts \u0026amp; Nuts\u003c\/a\u003e range, or browse \u003ca href=\"\/collections\/dune-buggy\"\u003eDune Buggy Parts\u003c\/a\u003e, \u003ca href=\"\/collections\/hardware\"\u003eHardware\u003c\/a\u003e, the full \u003ca href=\"\/collections\/empi\"\u003eEMPI Parts\u003c\/a\u003e catalog and \u003ca href=\"\/collections\/all-vw-aircooled\"\u003eAll Air-Cooled VW\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eProp 65 Warning\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003e⚠ WARNING:\u003c\/b\u003e This product can expose you to chemicals which are known to the State of California to cause cancer and reproductive harm. For more information go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\" rel=\"nofollow\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e. All parts legal for use on pre-pollution controlled vehicles only.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"Product\", \"name\": \"EMPI Chrome Lug Nuts — M14 x 1.5, 60° Acorn Seat, Set of 4 | VW Stud-Conversion \u0026 Dune Buggy Wheels (00-9519-0)\", \"sku\": \"00-9519-0\", \"mpn\": \"00-9519-0\", \"gtin12\": \"707924416596\", \"brand\": {\"@type\": \"Brand\", \"name\": \"EMPI\"}, \"image\": [\"https:\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/00-9519-0.jpg?v=1789974092\"], \"description\": \"Set of 4 chrome M14 x 1.5 acorn lug nuts with a 60 degree conical seat, for VW stud conversions and dune buggy wheels.\", \"offers\": {\"@type\": \"Offer\", \"url\": \"https:\/\/shop.washburnsmetal.com\/products\/empi-chrome-lug-nuts-m14-x-1-5-60-degree-acorn-set-of-4-vw-stud-conversion-00-9519-0\", \"priceCurrency\": \"USD\", \"price\": \"7.59\", \"itemCondition\": \"https:\/\/schema.org\/NewCondition\", \"seller\": {\"@type\": \"Organization\", \"name\": \"Washburn's Metal\"}}}\u003c\/script\u003e","brand":"EMPI","offers":[{"title":"Default Title","offer_id":48386577825907,"sku":"00-9519-0","price":7.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/00-9519-0.jpg?v=1789974092"},{"product_id":"empi-60-chrome-lug-bolt-kit-set-of-20-m12x1-5-for-empi-5x205-alloys-vw-beetle-1949-67-ghia-4-00-9711-0","title":"EMPI 60° Chrome Lug Bolt Kit, Set of 20 — M12x1.5 for EMPI 5x205 Alloys | VW Beetle 1949–67, Ghia (4× 00-9711-0)","description":"\u003ch2\u003e\u003cb\u003eEMPI 60° Chrome Lug Bolt Kit — Set of 20, M12x1.5, for EMPI 5x205 Alloy Wheels\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cb\u003eShort answer:\u003c\/b\u003e This kit is 20 EMPI 00-9711-0 chrome lug bolts (four sets of five): M12x1.5 thread with a 60° cone seat, the hardware EMPI specifies for its 60° cone-seat 5x205 (wide-five) alloy wheels. Twenty bolts mount a full set of four wheels on a 1949–1967 Beetle, 1956–1966 Karmann Ghia, 1961–1965 Type 3 or a 1973–1974 Thing. It does not fit 4-lug cars, the wide-five Bus, or ball-seat wheels such as the EMPI 911-style 5x205 alloys, the Mobelwagen Vintage 190 and factory VW steel wheels.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePart numbers:\u003c\/b\u003e KIT20-00-9711-0 (kit) · contains 4× EMPI 00-9711-0 \/ 0097110 · single bolt 00-9711-7\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eFitment\u003c\/b\u003e\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1949–1967\u003c\/td\u003e\n\u003ctd\u003eVW Beetle (5x205)\u003c\/td\u003e\n\u003ctd\u003eFits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1956–1966\u003c\/td\u003e\n\u003ctd\u003eVW Karmann Ghia (5x205)\u003c\/td\u003e\n\u003ctd\u003eFits. The 1967 Ghia is 4x130.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1961–1965\u003c\/td\u003e\n\u003ctd\u003eVW Type 3 (5x205)\u003c\/td\u003e\n\u003ctd\u003eFits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1973–1974\u003c\/td\u003e\n\u003ctd\u003eVW Thing (181)\u003c\/td\u003e\n\u003ctd\u003eFits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1963–1967\u003c\/td\u003e\n\u003ctd\u003ePan-based dune buggy on 5x205 drums\u003c\/td\u003e\n\u003ctd\u003eFits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1950–1970\u003c\/td\u003e\n\u003ctd\u003eVW Bus with 5x205 drums\u003c\/td\u003e\n\u003ctd\u003e\n\u003cb\u003eDoes not fit\u003c\/b\u003e — the Split and 1968–1970 Bay Bus use M14x1.5 wheel bolts. EMPI does not list 00-9711-0 for the Bus\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1966–1979\u003c\/td\u003e\n\u003ctd\u003e4-lug (4x130) Beetle 1968–1979, Ghia 1967–1974, Type 3 1966–1973\u003c\/td\u003e\n\u003ctd\u003e\n\u003cb\u003eDoes not fit\u003c\/b\u003e — use KIT16-00-9712-0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAll\u003c\/td\u003e\n\u003ctd\u003eBall-seat wheels: EMPI 911-style (Fuchs-style) 5x205 alloys 10-1108-0, 10-1109-0, 10-1110-0 and 10-1111-0; Mobelwagen Vintage 190 (10-1171-0, 10-1172-0, 10-1174-0); factory VW steel wheels\u003c\/td\u003e\n\u003ctd\u003e\n\u003cb\u003eDoes not fit\u003c\/b\u003e — these wheels have a ball (radius) seat; this kit is 60° cone seat only. Use M12x1.5 ball-seat bolts instead\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003cb\u003eSpecifications\u003c\/b\u003e\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread\u003c\/td\u003e\n\u003ctd\u003eM12 x 1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeat\u003c\/td\u003e\n\u003ctd\u003e60° cone (taper)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eChrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003e20 bolts (4 sets of 5)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFor\u003c\/td\u003e\n\u003ctd\u003eEMPI 60° cone-seat 5x205 alloy wheels (not the ball-seat 911-style or Vintage 190)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKit weight\u003c\/td\u003e\n\u003ctd\u003e4.00 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eComponents\u003c\/td\u003e\n\u003ctd\u003e4× EMPI 00-9711-0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e20 chrome 60° lug bolts, M12x1.5 (four EMPI 00-9711-0 sets of 5)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eNot Included\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eWheels, center caps, valve stems\u003c\/li\u003e\n\u003cli\u003eWheel locks (see EMPI 70-2706-0, 12mm 60° locks)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eWhy It Matters\u003c\/b\u003e\u003c\/h3\u003e\u003cp\u003eWide-five VW drums take lug \u003cb\u003ebolts\u003c\/b\u003e, not studs, and the seat on the bolt has to match the seat machined into the wheel. Factory VW steel wheels use a rounded \u003cb\u003eball\u003c\/b\u003e seat; most EMPI aluminum wheels use a \u003cb\u003e60° cone\u003c\/b\u003e. The exceptions are EMPI's 911-style 5x205 alloys and the Mobelwagen Vintage 190, which are ball seat. Run a ball-seat bolt in a cone-seat wheel, or a cone-seat bolt in a ball-seat wheel, and only a thin ring of metal touches, so the bolt can loosen and the wheel can crack around the hole. This kit gives you the exact EMPI-specified bolt for every hole on a 4-wheel set of cone-seat alloys, at a 5% kit discount over buying four packs.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eInstall Notes\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThread every bolt in by hand first; the threads should start without force.\u003c\/li\u003e\n\u003cli\u003eTighten in a star pattern in two or three passes.\u003c\/li\u003e\n\u003cli\u003eTorque to your vehicle's factory wheel-bolt spec and re-check after the first 50 miles.\u003c\/li\u003e\n\u003cli\u003eDo not use these with wheel spacers; spacers need longer bolts (EMPI 70-2875-0).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eWhat lug bolts do EMPI 5x205 alloy wheels use?\u003c\/b\u003e For EMPI's 60° cone-seat 5x205 alloys, EMPI specifies its 00-9711-0 chrome bolts: M12x1.5 thread with a 60° cone seat. This kit is 20 of them, enough for four wheels. EMPI's 911-style 5x205 alloys are ball seat and need ball-seat bolts instead.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWill these fit my stock VW steel wheels?\u003c\/b\u003e No. Stock VW steel wheels use a ball seat. These are 60° cone-seat bolts for EMPI and other aftermarket alloys.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDo these fit EMPI 911-style (Fuchs-style) 5x205 wheels or the Mobelwagen Vintage 190?\u003c\/b\u003e No. EMPI 911-style 5x205 wheels (10-1108-0, 10-1109-0, 10-1110-0, 10-1111-0) and the Mobelwagen Vintage 190 have a ball (radius) seat. Use M12x1.5 ball-seat lug bolts on them, not this 60° kit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHow many lug bolts do I need for a wide-five Beetle?\u003c\/b\u003e Twenty: five per wheel on four wheels. This kit is exactly 20.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDo these fit a 1968 or later Beetle?\u003c\/b\u003e No. 1968 and later Beetles (and 1967 and later Karmann Ghias) use the 4x130 pattern with M14x1.5 bolts. Use the 16-bolt kit KIT16-00-9712-0.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCan I buy them in smaller quantities?\u003c\/b\u003e Yes, EMPI 00-9711-0 is also listed as a set of 5 in our store.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAre you an authorized EMPI dealer?\u003c\/b\u003e Yes. Washburn's Metal is an authorized EMPI dealer, so this is genuine EMPI hardware shipped from our Orange, California shop.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\u003ch3\u003e\u003cb\u003eExplore Related Categories\u003c\/b\u003e\u003c\/h3\u003e\u003cp\u003e\u003ca href=\"\/collections\/wheels\"\u003eWheels\u003c\/a\u003e, \u003ca href=\"\/collections\/hardware\"\u003eHardware\u003c\/a\u003e, \u003ca href=\"\/search?q=00-9711-0\"\u003eLug bolt sets of 5\u003c\/a\u003e, \u003ca href=\"\/collections\/all-vw-aircooled\"\u003eAir-Cooled VW\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eParts are legal for use on pre-pollution-controlled vehicles only.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eProp 65 Warning\u003c\/b\u003e\u003c\/h3\u003e\u003cp\u003eWARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.p65warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"EMPI","offers":[{"title":"Default Title","offer_id":66941938008179,"sku":"KIT20-00-9711-0","price":89.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/00-9711-0-scaled.jpg?v=1792475345"},{"product_id":"empi-60-chrome-lug-bolt-kit-set-of-16-m14x1-5-for-empi-4x130-alloys-vw-beetle-1968-79-ghia-4-00-9712-0","title":"EMPI 60° Chrome Lug Bolt Kit, Set of 16 — M14x1.5 for EMPI 4x130 Alloys | VW Beetle 1968–79, Ghia (4× 00-9712-0)","description":"\u003ch2\u003e\u003cb\u003eEMPI 60° Chrome Lug Bolt Kit — Set of 16, M14x1.5, for EMPI 4x130 Alloy Wheels\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cb\u003eShort answer:\u003c\/b\u003e This kit is 16 EMPI 00-9712-0 chrome lug bolts (four sets of four): M14x1.5 thread with a 60° cone seat, the bolt EMPI specifies for its 4x130 alloy wheels. Sixteen bolts mount a full set of four wheels on a 1968–1979 Beetle or Super Beetle, 1967–1974 Karmann Ghia or 1966–1973 Type 3. It does not fit wide-five (5x205) cars or factory ball-seat steel wheels.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePart numbers:\u003c\/b\u003e KIT16-00-9712-0 (kit) · contains 4× EMPI 00-9712-0 \/ 0097120 · single bolt 00-9712-7\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eFitment\u003c\/b\u003e\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1968–1979\u003c\/td\u003e\n\u003ctd\u003eVW Beetle (4x130)\u003c\/td\u003e\n\u003ctd\u003eFits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1971–1979\u003c\/td\u003e\n\u003ctd\u003eVW Super Beetle\u003c\/td\u003e\n\u003ctd\u003eFits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1967–1974\u003c\/td\u003e\n\u003ctd\u003eVW Karmann Ghia (4x130)\u003c\/td\u003e\n\u003ctd\u003eFits (front discs and four-lug hubs from the 1967 model year)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1966–1973\u003c\/td\u003e\n\u003ctd\u003eVW Type 3 (4x130)\u003c\/td\u003e\n\u003ctd\u003eFits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1968–1979\u003c\/td\u003e\n\u003ctd\u003eDune buggy \/ Baja on 4x130 drums or rotors\u003c\/td\u003e\n\u003ctd\u003eFits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1949–1967\u003c\/td\u003e\n\u003ctd\u003eWide-five (5x205) Beetle 1949–1967, Ghia 1956–1966, Type 3 1961–1965\u003c\/td\u003e\n\u003ctd\u003e\n\u003cb\u003eDoes not fit\u003c\/b\u003e — use KIT20-00-9711-0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1950–1979\u003c\/td\u003e\n\u003ctd\u003eVW Bus\u003c\/td\u003e\n\u003ctd\u003e\n\u003cb\u003eDoes not fit\u003c\/b\u003e — Bus uses 5x205 or 5x112\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAll\u003c\/td\u003e\n\u003ctd\u003eFactory VW steel wheels (ball seat)\u003c\/td\u003e\n\u003ctd\u003e\n\u003cb\u003eDoes not fit\u003c\/b\u003e — 60° cone seat only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003cb\u003eSpecifications\u003c\/b\u003e\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread\u003c\/td\u003e\n\u003ctd\u003eM14 x 1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeat\u003c\/td\u003e\n\u003ctd\u003e60° cone (taper)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eChrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003e16 bolts (4 sets of 4)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFor\u003c\/td\u003e\n\u003ctd\u003eEMPI 4x130 alloy wheels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKit weight\u003c\/td\u003e\n\u003ctd\u003e3.40 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eComponents\u003c\/td\u003e\n\u003ctd\u003e4× EMPI 00-9712-0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e16 chrome 60° lug bolts, M14x1.5 (four EMPI 00-9712-0 sets of 4)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eNot Included\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eWheels, center caps, valve stems\u003c\/li\u003e\n\u003cli\u003eWheel locks (see EMPI 70-2707-0, 14mm 60° locks)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eWhy It Matters\u003c\/b\u003e\u003c\/h3\u003e\u003cp\u003e4-lug VW drums and rotors take lug \u003cb\u003ebolts\u003c\/b\u003e, and the bolt seat must match the wheel. Factory steel wheels are \u003cb\u003eball\u003c\/b\u003e seat; EMPI alloys are \u003cb\u003e60° cone\u003c\/b\u003e. Mixing them is the most common wheel-fitment mistake we see, and it leaves the wheel held by a thin contact ring that can loosen. This kit is the EMPI-specified bolt for a full set of four 4x130 wheels, priced 5% under four separate packs.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eInstall Notes\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStart every bolt by hand.\u003c\/li\u003e\n\u003cli\u003eTighten in a cross pattern in two or three passes.\u003c\/li\u003e\n\u003cli\u003eTorque to your vehicle's factory wheel-bolt spec and re-check after the first 50 miles.\u003c\/li\u003e\n\u003cli\u003eSpacers require longer bolts; these are standard length.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eWhat lug bolts do EMPI 4x130 alloy wheels use?\u003c\/b\u003e EMPI specifies 00-9712-0: M14x1.5 thread, 60° cone seat, chrome. This kit is 16 of them for four wheels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWill these fit factory VW steel wheels?\u003c\/b\u003e No. Factory steel wheels use a ball seat. These are 60° cone-seat bolts for EMPI and other aftermarket alloys.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHow many lug bolts does a 4-lug Beetle need?\u003c\/b\u003e Sixteen: four per wheel on four wheels. This kit is exactly 16.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDo these fit a 1967 Beetle?\u003c\/b\u003e No. The 1967 Beetle is 5x205 with M12 bolts. Use KIT20-00-9711-0. (A 1967 Karmann Ghia is 4x130 and does take these bolts.)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCan I buy a single set of 4?\u003c\/b\u003e Yes, EMPI 00-9712-0 is also listed as a set of 4 in our store.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAre you an authorized EMPI dealer?\u003c\/b\u003e Yes. Washburn's Metal is an authorized EMPI dealer, so this is genuine EMPI hardware shipped from our Orange, California shop.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\u003ch3\u003e\u003cb\u003eExplore Related Categories\u003c\/b\u003e\u003c\/h3\u003e\u003cp\u003e\u003ca href=\"\/collections\/wheels\"\u003eWheels\u003c\/a\u003e, \u003ca href=\"\/collections\/hardware\"\u003eHardware\u003c\/a\u003e, \u003ca href=\"\/search?q=00-9712-0\"\u003eLug bolt sets of 4\u003c\/a\u003e, \u003ca href=\"\/collections\/all-vw-aircooled\"\u003eAir-Cooled VW\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eParts are legal for use on pre-pollution-controlled vehicles only.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eProp 65 Warning\u003c\/b\u003e\u003c\/h3\u003e\u003cp\u003eWARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.p65warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"EMPI","offers":[{"title":"Default Title","offer_id":66941939023987,"sku":"KIT16-00-9712-0","price":89.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/00-9712-0-scaled.jpg?v=1792475388"},{"product_id":"empi-porsche-style-ball-seat-lug-nut-kit-set-of-20-m14x1-5-5x130-wheels-on-vw-conversions-porsche","title":"EMPI Porsche-Style Ball Seat Lug Nut Kit, Set of 20 — M14x1.5 | 5x130 Wheels on VW Conversions \u0026 Porsche","description":"\u003ch2\u003e\u003cb\u003eEMPI Porsche-Style Lug Nut Kit — Set of 20, M14x1.5 Ball Seat, for 5x130 Wheels\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cb\u003eShort answer:\u003c\/b\u003e This kit is 20 EMPI Porsche-style lug nuts, M14x1.5 thread with a ball seat, for 5x130 wheels that use 14mm ball-seat hardware, such as EMPI's 911 Alloy and Torque Star II. Twenty nuts mount four wheels on a 5x130 hub with M14 studs: a Porsche 911\/912\/914-6 or a VW converted with 5x130 adapters or drums. Choose zinc steel, chrome, black or raw alloy.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePart numbers:\u003c\/b\u003e Kit SKUs KIT20-70-2860-0 \/ KIT20-70-2882-0 \/ KIT20-70-2883-0 \/ KIT20-70-2887-0 · each contains 4× the EMPI set-of-5 part (70-2860-0 zinc, 70-2882-0 chrome alloy, 70-2883-0 black alloy, 70-2887-0 raw alloy)\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eFitment\u003c\/b\u003e\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1965–1989\u003c\/td\u003e\n\u003ctd\u003ePorsche 911 \/ 912 on 5x130 hubs with M14x1.5 studs\u003c\/td\u003e\n\u003ctd\u003eFits ball-seat wheels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1968–1979\u003c\/td\u003e\n\u003ctd\u003eVW Beetle \/ Ghia \/ Type 3 with EMPI 00-9500-0 adapters\u003c\/td\u003e\n\u003ctd\u003eFits (nuts go on the adapter studs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1949–1967\u003c\/td\u003e\n\u003ctd\u003eWide-five VW with EMPI 00-9499-0 adapters\u003c\/td\u003e\n\u003ctd\u003eFits (nuts go on the adapter studs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAll\u003c\/td\u003e\n\u003ctd\u003eVW with 5x130 drums\/rotors and M14 studs\u003c\/td\u003e\n\u003ctd\u003eFits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAll\u003c\/td\u003e\n\u003ctd\u003eStock 4x130 or 5x205 VW hubs\u003c\/td\u003e\n\u003ctd\u003e\n\u003cb\u003eDoes not fit\u003c\/b\u003e — those hubs take bolts, not nuts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAll\u003c\/td\u003e\n\u003ctd\u003e60° cone-seat wheels\u003c\/td\u003e\n\u003ctd\u003e\n\u003cb\u003eDoes not fit\u003c\/b\u003e — use 60° nuts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003cb\u003eSpecifications\u003c\/b\u003e\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread\u003c\/td\u003e\n\u003ctd\u003eM14 x 1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeat\u003c\/td\u003e\n\u003ctd\u003eBall (radius) seat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStyle\u003c\/td\u003e\n\u003ctd\u003ePorsche-style open nut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003e20 nuts (4 sets of 5)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinishes\u003c\/td\u003e\n\u003ctd\u003eZinc-plated steel, chrome aluminum alloy, black aluminum alloy, raw aluminum alloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKit weight\u003c\/td\u003e\n\u003ctd\u003e1.72 lb (zinc) \/ 0.72 lb (alloy)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e20 Porsche-style M14x1.5 ball-seat lug nuts in your chosen finish (four EMPI sets of 5)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eNot Included\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eWheel studs or adapters\u003c\/li\u003e\n\u003cli\u003eWheel locks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eWhy It Matters\u003c\/b\u003e\u003c\/h3\u003e\u003cp\u003eFive-lug Porsche-pattern wheels like EMPI's 911 Alloy and Torque Star II use a \u003cb\u003e14mm ball seat\u003c\/b\u003e. A 60° cone nut will not seat in them correctly. When a VW is converted to 5x130 with adapters, the adapter carries M14x1.5 studs, and these are the nuts that go on them. One kit covers a full car.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eInstall Notes\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eConfirm your wheel's seat type before installing: ball seat only.\u003c\/li\u003e\n\u003cli\u003eStart all nuts by hand, then tighten in a star pattern.\u003c\/li\u003e\n\u003cli\u003eTorque to the wheel or vehicle manufacturer's spec and re-check after 50 miles.\u003c\/li\u003e\n\u003cli\u003eAlloy nuts are lighter; check them at every service.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eWhat lug nuts do 5x130 Fuchs-style wheels need?\u003c\/b\u003e Most, including EMPI's 911 Alloy and Torque Star II, use M14x1.5 ball-seat nuts like these. Check your wheel's seat before ordering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDo I need these for a 4-lug to 5x130 conversion?\u003c\/b\u003e Yes. EMPI's 00-9500-0 adapters have M14x1.5 studs on the wheel side; these 20 nuts mount four wheels on them.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWill these fit a stock VW?\u003c\/b\u003e No. Stock 4x130 and 5x205 VW hubs use lug bolts, not studs, so nuts do not apply.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWhich finish should I pick?\u003c\/b\u003e Zinc steel is the factory-style budget choice. The chrome, black and raw alloy versions are lightweight aluminum.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAre you an authorized EMPI dealer?\u003c\/b\u003e Yes. Washburn's Metal is an authorized EMPI dealer, so this is genuine EMPI hardware shipped from our Orange, California shop.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\u003ch3\u003e\u003cb\u003eExplore Related Categories\u003c\/b\u003e\u003c\/h3\u003e\u003cp\u003e\u003ca href=\"\/collections\/wheels\"\u003eWheels\u003c\/a\u003e, \u003ca href=\"\/collections\/hardware\"\u003eHardware\u003c\/a\u003e, \u003ca href=\"\/search?q=KIT-4L-5X130\"\u003e4-lug to 5x130 conversion kit\u003c\/a\u003e, \u003ca href=\"\/collections\/all-vw-aircooled\"\u003eAir-Cooled VW\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eParts are legal for use on pre-pollution-controlled vehicles only.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eProp 65 Warning\u003c\/b\u003e\u003c\/h3\u003e\u003cp\u003eWARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.p65warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"EMPI","offers":[{"title":"Zinc Steel (4× 70-2860-0)","offer_id":66941939417203,"sku":"KIT20-70-2860-0","price":49.95,"currency_code":"USD","in_stock":true},{"title":"Chrome Alloy (4× 70-2882-0)","offer_id":66941939449971,"sku":"KIT20-70-2882-0","price":196.95,"currency_code":"USD","in_stock":true},{"title":"Black Alloy (4× 70-2883-0)","offer_id":66941939482739,"sku":"KIT20-70-2883-0","price":193.95,"currency_code":"USD","in_stock":true},{"title":"Raw Alloy (4× 70-2887-0)","offer_id":66941939515507,"sku":"KIT20-70-2887-0","price":159.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/70-2860-0-scaled_780bd758-edda-47a1-917f-a16aa7e3b4e7.jpg?v=1792475440"},{"product_id":"empi-60-chrome-lug-nut-kit-set-of-20-m14x1-5-small-diameter-for-5x112-wheels-vw-bus-1971-1979-4-00-9547-0","title":"EMPI 60° Chrome Lug Nut Kit, Set of 20 — M14x1.5 Small Diameter for 5x112 Wheels | VW Bus 1971–1979 (4× 00-9547-0)","description":"\u003ch2\u003e\u003cb\u003eEMPI 60° Chrome Lug Nut Kit — Set of 20, M14x1.5 Small Diameter, for 5x112 Bay Bus Wheels\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cb\u003eShort answer:\u003c\/b\u003e This kit is 20 EMPI 00-9547-0 chrome lug nuts (four sets of five, each set with its install tool): M14x1.5 thread, 60° cone seat, small diameter. EMPI lists 00-9547-0 for all of its 5x112 wheels, so this kit mounts a full set of four EMPI 5x112 alloys on a 1971–1979 VW Bay Window Bus with its factory M14x1.5 studs.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePart numbers:\u003c\/b\u003e KIT20-00-9547-0 (kit) · contains 4× EMPI 00-9547-0 \/ 0095470\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eFitment\u003c\/b\u003e\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1971–1979\u003c\/td\u003e\n\u003ctd\u003eVW Bus (Bay Window), 5x112, M14x1.5 studs\u003c\/td\u003e\n\u003ctd\u003eFits EMPI 5x112 alloy wheels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1950–1970\u003c\/td\u003e\n\u003ctd\u003eVW Bus with 5x205 drums\u003c\/td\u003e\n\u003ctd\u003e\n\u003cb\u003eDoes not fit\u003c\/b\u003e — wide-five Buses use lug bolts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1980–1991\u003c\/td\u003e\n\u003ctd\u003eVW Vanagon (5x112)\u003c\/td\u003e\n\u003ctd\u003eNot listed by EMPI for this kit; confirm your stud thread\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAll\u003c\/td\u003e\n\u003ctd\u003eFactory VW steel or alloy Bus wheels\u003c\/td\u003e\n\u003ctd\u003e\n\u003cb\u003eDoes not fit\u003c\/b\u003e — keep the factory nuts for factory wheels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003cb\u003eSpecifications\u003c\/b\u003e\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread\u003c\/td\u003e\n\u003ctd\u003eM14 x 1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeat\u003c\/td\u003e\n\u003ctd\u003e60° cone (taper)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHead\u003c\/td\u003e\n\u003ctd\u003eSmall diameter, turned with the included tool\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eChrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003e20 nuts + 4 tools (4 sets of 5)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKit weight\u003c\/td\u003e\n\u003ctd\u003e2.60 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e20 chrome 60° small-diameter lug nuts, M14x1.5\u003c\/li\u003e\n\u003cli\u003e4 install tools (one per EMPI set)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eNot Included\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eWheel studs (your Bus keeps its factory M14x1.5 studs)\u003c\/li\u003e\n\u003cli\u003eWheels, center caps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eWhy It Matters\u003c\/b\u003e\u003c\/h3\u003e\u003cp\u003eThe 1971–1979 Bay Bus is lug-centric: the nuts, not the hub bore, center the wheel. That makes the nut seat critical. EMPI specifies this 60° cone-seat, small-diameter nut for all of its 5x112 wheels, turned with the tool supplied in each set. Factory Bus nuts are made for factory wheels and should not be reused on EMPI alloys.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eInstall Notes\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eUse the supplied tool and a torque wrench; do not use an impact gun on chrome nuts.\u003c\/li\u003e\n\u003cli\u003eTighten in a star pattern in stages.\u003c\/li\u003e\n\u003cli\u003eRatwell's Bay Bus guide lists 94 ft-lb for the 1971+ Bus wheel nuts; confirm against your wheel maker's spec.\u003c\/li\u003e\n\u003cli\u003eRe-check torque after the first 50 miles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eWhat lug nuts do EMPI 5x112 Bus wheels use?\u003c\/b\u003e EMPI lists its 00-9547-0 for all of its 5x112 wheels: M14x1.5, 60° cone seat, small diameter, chrome, sold with a tool. This kit is 20 of them.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDo I need new studs on my 1971–1979 Bus?\u003c\/b\u003e No. The Bay Bus already has M14x1.5 studs; this kit replaces only the nuts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWill these work on factory Bus steel wheels?\u003c\/b\u003e No. Keep the factory nuts for factory wheels; these are for EMPI 60° alloys.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWhy is there a tool in each set?\u003c\/b\u003e EMPI packs a tool with each set of its small-diameter nuts for installing and removing them.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAre you an authorized EMPI dealer?\u003c\/b\u003e Yes. Washburn's Metal is an authorized EMPI dealer, so this is genuine EMPI hardware shipped from our Orange, California shop.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\u003ch3\u003e\u003cb\u003eExplore Related Categories\u003c\/b\u003e\u003c\/h3\u003e\u003cp\u003e\u003ca href=\"\/collections\/wheels\"\u003eWheels\u003c\/a\u003e, \u003ca href=\"\/collections\/vw-bus-5x112-wheels\"\u003eBay Bus 5x112 wheels\u003c\/a\u003e, \u003ca href=\"\/collections\/hardware\"\u003eHardware\u003c\/a\u003e, \u003ca href=\"\/collections\/vw-bus\"\u003eVW Bus parts\u003c\/a\u003e, \u003ca href=\"\/collections\/all-vw-aircooled\"\u003eAir-Cooled VW\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eParts are legal for use on pre-pollution-controlled vehicles only.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eProp 65 Warning\u003c\/b\u003e\u003c\/h3\u003e\u003cp\u003eWARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.p65warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"EMPI","offers":[{"title":"Default Title","offer_id":66941939908723,"sku":"KIT20-00-9547-0","price":86.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/00-9547-0.jpg?v=1792475522"},{"product_id":"empi-wheel-adapters-porsche-5x130-wheel-to-vw-4x130-hub-aluminum-26-15mm-pair-vw-beetle-1968-79-00-9500-0","title":"EMPI Wheel Adapters, Porsche 5x130 Wheel to VW 4x130 Hub — Aluminum 26.15mm, Pair | VW Beetle 1968–79 (00-9500-0)","description":"\u003ch2\u003e\u003cb\u003eEMPI 00-9500-0 Wheel Adapters — 5x130 Porsche Wheel on a 4x130 VW Hub, Aluminum, Pair\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cb\u003eShort answer:\u003c\/b\u003e EMPI 00-9500-0 is a pair of 26.15mm aluminum adapters that let you run 5x130 Porsche-pattern wheels (Fuchs-style, 911 Alloy, Torque Star) on a 4x130 VW drum or rotor. The hub side bolts to a 1968–1979 Beetle, Super Beetle, 1967–1974 Ghia or 1966–1973 Type 3; the wheel side has M14x1.5 studs. One pair does two wheels; a car needs two pairs.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePart numbers:\u003c\/b\u003e EMPI 00-9500-0 \/ 0095000 · JBugs 9500 · ISP West MB9500-0 · related bolt spec 00-9500-5 (M14x1.5, 21mm, 17mm head)\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eFitment\u003c\/b\u003e\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1968–1979\u003c\/td\u003e\n\u003ctd\u003eVW Beetle (4x130)\u003c\/td\u003e\n\u003ctd\u003eFits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1971–1979\u003c\/td\u003e\n\u003ctd\u003eVW Super Beetle\u003c\/td\u003e\n\u003ctd\u003eFits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1967–1974\u003c\/td\u003e\n\u003ctd\u003eVW Karmann Ghia (4x130)\u003c\/td\u003e\n\u003ctd\u003eFits (four-lug from the 1967 model year)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1966–1973\u003c\/td\u003e\n\u003ctd\u003eVW Type 3 (4x130)\u003c\/td\u003e\n\u003ctd\u003eFits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1968–1979\u003c\/td\u003e\n\u003ctd\u003eDune buggy \/ Baja on 4x130 drums or rotors\u003c\/td\u003e\n\u003ctd\u003eFits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1949–1967\u003c\/td\u003e\n\u003ctd\u003eWide-five (5x205) VW: Beetle to 1967, Ghia to 1966, Type 3 to 1965\u003c\/td\u003e\n\u003ctd\u003e\n\u003cb\u003eDoes not fit\u003c\/b\u003e — use EMPI 00-9499-0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1950–1979\u003c\/td\u003e\n\u003ctd\u003eVW Bus\u003c\/td\u003e\n\u003ctd\u003e\u003cb\u003eDoes not fit\u003c\/b\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003cb\u003eSpecifications\u003c\/b\u003e\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWheel side (outer face)\u003c\/td\u003e\n\u003ctd\u003e5x130 Porsche pattern, M14x1.5 studs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHub side (inner face)\u003c\/td\u003e\n\u003ctd\u003e4x130 VW drum or rotor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eAluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThickness\u003c\/td\u003e\n\u003ctd\u003e26.15 mm (about 1 in) per adapter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold as\u003c\/td\u003e\n\u003ctd\u003ePair (2 adapters)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStuds supplied\u003c\/td\u003e\n\u003ctd\u003e8 straight studs + 2 conversion studs per pair (per EMPI distributor listing)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHub attachment\u003c\/td\u003e\n\u003ctd\u003e3 M14x1.5 ball-seat VW lug bolts per adapter (not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e5.65 lb per pair\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2 aluminum adapters\u003c\/li\u003e\n\u003cli\u003eWheel studs for the 5x130 face (8 straight + 2 conversion studs per pair, per EMPI distributor listing)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eNot Included\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHub bolts: 3 per adapter, M14x1.5 ball seat (EMPI 70-2863-0, 17mm head, matches EMPI's 00-9500-5 spec)\u003c\/li\u003e\n\u003cli\u003eWheel nuts: M14x1.5 nuts that match your wheel's seat (ball seat for most 5x130 Porsche-style wheels, e.g. EMPI 70-2860-0)\u003c\/li\u003e\n\u003cli\u003eOur complete kit KIT-4L-5X130 includes both pairs, the hub bolts and the wheel nuts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eWhy It Matters\u003c\/b\u003e\u003c\/h3\u003e\u003cp\u003eThe 4x130 to 5x130 swap is the classic way to put Fuchs-style wheels on a late Beetle without changing drums or rotors. Direction matters: this adapter is \u003cb\u003ewheel 5x130, hub 4x130\u003c\/b\u003e. Its 1-inch thickness also pushes each wheel out about an inch per side, so check tire clearance in the fenders, especially with wider rears.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eInstall Notes\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eClean the drum\/rotor face; the adapter must sit flat.\u003c\/li\u003e\n\u003cli\u003eBolt each adapter to the hub with three M14x1.5 ball-seat bolts (17mm head) plus the conversion stud, per EMPI's distributor instructions.\u003c\/li\u003e\n\u003cli\u003eTorque the hub bolts to your vehicle's factory wheel-bolt spec before mounting the wheel.\u003c\/li\u003e\n\u003cli\u003eMount the wheel with M14x1.5 nuts matching the wheel seat; re-check all torque after 50 miles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eWhat does EMPI 00-9500-0 do?\u003c\/b\u003e It lets a 5x130 Porsche-pattern wheel bolt onto a 4x130 VW Beetle, Ghia or Type 3 hub. The wheel side is 5x130 with M14x1.5 studs; the hub side is 4x130.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHow many do I need for a whole car?\u003c\/b\u003e Two pairs. Each 00-9500-0 is a pair for two wheels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWhat hardware do I need besides the adapters?\u003c\/b\u003e Three M14x1.5 ball-seat lug bolts per adapter to hold it to the hub (12 for a car) and 20 M14x1.5 wheel nuts that match your wheel's seat. Our KIT-4L-5X130 includes everything.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHow thick are they?\u003c\/b\u003e 26.15 mm, about 1 inch, per adapter. Your wheels move out by that much.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWill this fit a 1967 Beetle?\u003c\/b\u003e No. The 1967 Beetle is 5x205. Use EMPI 00-9499-0 for wide-five cars. (A 1967 Karmann Ghia is 4x130 and does take this adapter.)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAre you an authorized EMPI dealer?\u003c\/b\u003e Yes. Washburn's Metal is an authorized EMPI dealer, so this is genuine EMPI hardware shipped from our Orange, California shop.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\u003ch3\u003e\u003cb\u003eExplore Related Categories\u003c\/b\u003e\u003c\/h3\u003e\u003cp\u003e\u003ca href=\"\/collections\/wheels\"\u003eWheels\u003c\/a\u003e, \u003ca href=\"\/collections\/5x130-porsche-pattern-wheels\"\u003e5x130 Porsche-pattern wheels\u003c\/a\u003e, \u003ca href=\"\/collections\/vw-4x130-wheels\"\u003eVW 4x130 wheels\u003c\/a\u003e, \u003ca href=\"\/collections\/hardware\"\u003eHardware\u003c\/a\u003e, \u003ca href=\"\/search?q=KIT-4L-5X130\"\u003eComplete 4-lug to 5x130 kit\u003c\/a\u003e, \u003ca href=\"\/collections\/all-vw-aircooled\"\u003eAir-Cooled VW\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eParts are legal for use on pre-pollution-controlled vehicles only.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eProp 65 Warning\u003c\/b\u003e\u003c\/h3\u003e\u003cp\u003eWARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.p65warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"EMPI","offers":[{"title":"Default Title","offer_id":66941940007027,"sku":"00-9500-0","price":97.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/00-9500-0.jpg?v=1792475571"},{"product_id":"empi-4-lug-to-5x130-conversion-kit-adapters-hub-bolts-20-ball-seat-nuts-vw-beetle-1968-79-ghia-type-3","title":"EMPI 4-Lug to 5x130 Conversion Kit — Adapters, Hub Bolts \u0026 20 Ball Seat Nuts | VW Beetle 1968–79, Ghia, Type 3","description":"\u003ch2\u003e\u003cb\u003eEMPI 4-Lug to 5x130 Wheel Conversion Kit — Complete for 4 Wheels\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cb\u003eShort answer:\u003c\/b\u003e Everything to put 5x130 Porsche-pattern ball-seat wheels (Fuchs-style, EMPI 911 Alloy, Torque Star II) on a 4x130 VW: two pairs of EMPI 00-9500-0 aluminum adapters (four adapters, studs supplied), 15 M14x1.5 ball-seat hub bolts with 17mm heads (12 needed, 3 spare) and 20 M14x1.5 ball-seat wheel nuts. Fits 1968–1979 Beetle and Super Beetle, 1967–1974 Ghia and 1966–1973 Type 3.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePart numbers:\u003c\/b\u003e KIT-4L-5X130 (kit) · 2× EMPI 00-9500-0 · 3× EMPI 70-2863-0 · 4× EMPI 70-2860-0\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eFitment\u003c\/b\u003e\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1968–1979\u003c\/td\u003e\n\u003ctd\u003eVW Beetle (4x130)\u003c\/td\u003e\n\u003ctd\u003eFits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1971–1979\u003c\/td\u003e\n\u003ctd\u003eVW Super Beetle\u003c\/td\u003e\n\u003ctd\u003eFits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1967–1974\u003c\/td\u003e\n\u003ctd\u003eVW Karmann Ghia (4x130)\u003c\/td\u003e\n\u003ctd\u003eFits (four-lug from the 1967 model year)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1966–1973\u003c\/td\u003e\n\u003ctd\u003eVW Type 3 (4x130)\u003c\/td\u003e\n\u003ctd\u003eFits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1968–1979\u003c\/td\u003e\n\u003ctd\u003eDune buggy \/ Baja on 4x130 drums or rotors\u003c\/td\u003e\n\u003ctd\u003eFits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1949–1967\u003c\/td\u003e\n\u003ctd\u003eWide-five (5x205) VW: Beetle to 1967, Ghia to 1966, Type 3 to 1965\u003c\/td\u003e\n\u003ctd\u003e\n\u003cb\u003eDoes not fit\u003c\/b\u003e — wide-five cars use EMPI 00-9499-0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAll\u003c\/td\u003e\n\u003ctd\u003e60° cone-seat 5x130 wheels\u003c\/td\u003e\n\u003ctd\u003e\n\u003cb\u003eNuts do not match\u003c\/b\u003e — this kit's nuts are ball seat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003cb\u003eSpecifications\u003c\/b\u003e\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdapter\u003c\/td\u003e\n\u003ctd\u003eEMPI 00-9500-0, aluminum, 26.15 mm, wheel 5x130 \/ hub 4x130\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdapters in kit\u003c\/td\u003e\n\u003ctd\u003e4 (2 pairs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHub bolts\u003c\/td\u003e\n\u003ctd\u003e15× EMPI 70-2863-0, M14x1.5 ball seat, 17mm head (12 used, 3 spare)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWheel nuts\u003c\/td\u003e\n\u003ctd\u003e20× EMPI 70-2860-0, M14x1.5 ball seat, zinc, Porsche style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWheel offset change\u003c\/td\u003e\n\u003ctd\u003eAbout +1 in outward per side\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKit weight\u003c\/td\u003e\n\u003ctd\u003e15.27 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2 pairs EMPI 00-9500-0 adapters (4 adapters, studs supplied)\u003c\/li\u003e\n\u003cli\u003e3 sets EMPI 70-2863-0 hub bolts (15 bolts)\u003c\/li\u003e\n\u003cli\u003e4 sets EMPI 70-2860-0 Porsche-style ball-seat nuts (20 nuts)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eNot Included\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eWheels, tires, center caps\u003c\/li\u003e\n\u003cli\u003eWheel locks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eWhy It Matters\u003c\/b\u003e\u003c\/h3\u003e\u003cp\u003eMost 4x130 to 5x130 conversions stall on hardware: adapters are sold alone, and the bolts that hold them to the hub are not in the box. EMPI's distributor listing says each adapter is held by three M14x1.5 VW lug bolts, and EMPI's own replacement part for this adapter (00-9500-5) is an M14x1.5, 21mm bolt with a 17mm head, which is exactly the 70-2863-0 bolt in this kit. The wheel side gets ball-seat nuts to match Porsche-pattern wheels.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eInstall Notes\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBolt each adapter to the drum\/rotor with three 70-2863-0 bolts and the conversion stud; torque to the factory wheel-bolt spec.\u003c\/li\u003e\n\u003cli\u003eFit the wheel and run the 70-2860-0 nuts on by hand, then torque in a star pattern.\u003c\/li\u003e\n\u003cli\u003eCheck tire-to-fender clearance: the wheel moves out about 1 inch.\u003c\/li\u003e\n\u003cli\u003eRe-torque everything after 50 miles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eWhat do I need to put Fuchs wheels on a 4-lug Beetle?\u003c\/b\u003e Four 5x130 adapters (two pairs of EMPI 00-9500-0), 12 hub bolts to hold the adapters on, and 20 wheel nuts that match the wheel seat. This kit includes all of it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWhich side is the wheel and which is the hub?\u003c\/b\u003e The adapter bolts to the 4x130 VW hub; the 5x130 studs face out for the wheel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAre the nuts right for EMPI 911 Alloy and Torque Star wheels?\u003c\/b\u003e Yes. Those wheels use a 14mm ball seat, and the kit nuts are M14x1.5 ball seat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWhy are there 15 hub bolts?\u003c\/b\u003e Hub bolts come in sets of five. You need 12; three are spares.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWill my wheels stick out?\u003c\/b\u003e Yes, by about 1 inch per side. Check clearance before you drive.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAre you an authorized EMPI dealer?\u003c\/b\u003e Yes. Washburn's Metal is an authorized EMPI dealer, so this is genuine EMPI hardware shipped from our Orange, California shop.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\u003ch3\u003e\u003cb\u003eExplore Related Categories\u003c\/b\u003e\u003c\/h3\u003e\u003cp\u003e\u003ca href=\"\/collections\/wheels\"\u003eWheels\u003c\/a\u003e, \u003ca href=\"\/collections\/5x130-porsche-pattern-wheels\"\u003e5x130 Porsche-pattern wheels\u003c\/a\u003e, \u003ca href=\"\/collections\/vw-4x130-wheels\"\u003eVW 4x130 wheels\u003c\/a\u003e, \u003ca href=\"\/collections\/hardware\"\u003eHardware\u003c\/a\u003e, \u003ca href=\"\/collections\/all-vw-aircooled\"\u003eAir-Cooled VW\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eParts are legal for use on pre-pollution-controlled vehicles only.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eProp 65 Warning\u003c\/b\u003e\u003c\/h3\u003e\u003cp\u003eWARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.p65warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"EMPI","offers":[{"title":"Default Title","offer_id":66941940170867,"sku":"KIT-4L-5X130","price":285.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/00-9500-0_f4d91928-c8bd-4ec5-a206-93f33426216d.jpg?v=1792475620"},{"product_id":"empi-wheel-valve-stems-set-of-4-chrome-or-flush-mount-vw-beetle-bus-ghia-buggy-wheels-00-9710-0-00-9514-0","title":"EMPI Wheel Valve Stems, Set of 4 — Chrome or Flush Mount | VW Beetle, Bus, Ghia \u0026 Buggy Wheels (00-9710-0 \/ 00-9514-0)","description":"\u003ch2\u003e\u003cb\u003eEMPI Valve Stems — Chrome or Flush Mount, Set of 4\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cb\u003eShort answer:\u003c\/b\u003e EMPI valve stems sold as a set of four, for tubeless aftermarket wheels on air-cooled VWs, buggies and Porsches. Choose 00-9710-0 chrome stems with chrome caps, or 00-9514-0 flush-mount stems that sit nearly flush with the wheel for a clean look. Four stems do a full set of wheels. EMPI does not publish the valve-hole size, so check your wheel.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePart numbers:\u003c\/b\u003e EMPI 00-9710-0 \/ 0097100 (chrome) · EMPI 00-9514-0 \/ 0095140 (flush mount)\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eFitment\u003c\/b\u003e\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eAll\u003c\/td\u003e\n\u003ctd\u003eTubeless aftermarket and EMPI wheels on VW Beetle, Bus, Ghia, Type 3, Thing, buggies\u003c\/td\u003e\n\u003ctd\u003eFits standard valve holes; confirm your hole size\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAll\u003c\/td\u003e\n\u003ctd\u003eWheels run with inner tubes\u003c\/td\u003e\n\u003ctd\u003e\n\u003cb\u003eDoes not apply\u003c\/b\u003e — the tube carries its own valve\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003cb\u003eSpecifications\u003c\/b\u003e\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003e4 stems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e00-9710-0\u003c\/td\u003e\n\u003ctd\u003eChrome stem with cap; 0.15 lb set; made in Mexico\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e00-9514-0\u003c\/td\u003e\n\u003ctd\u003eFlush-mount stem; 0.335 lb set; made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eValve hole size\u003c\/td\u003e\n\u003ctd\u003eNot published by EMPI; confirming with EMPI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e4 valve stems in the style you choose, with caps\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eNot Included\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eTire mounting, balancing or TPMS sensors\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eWhy It Matters\u003c\/b\u003e\u003c\/h3\u003e\u003cp\u003eEMPI wheels already ship with a basic valve stem. These are upgrades: chrome stems dress up polished or chrome wheels, and flush-mount stems tuck out of the way on smooth-face and dish wheels where a tall stem looks out of place. Replacing stems whenever tires are mounted is cheap insurance against a slow leak.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eInstall Notes\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInstall when the tire is off the bead.\u003c\/li\u003e\n\u003cli\u003eClean the valve hole; seat the stem squarely.\u003c\/li\u003e\n\u003cli\u003eLeak-check with soapy water after inflating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eDo EMPI wheels come with valve stems?\u003c\/b\u003e Yes, most EMPI wheels ship with a standard stem. These sets are optional upgrades.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWhat is a flush-mount valve stem?\u003c\/b\u003e A stem that sits almost flush with the wheel face instead of sticking out, for a cleaner look on smooth or dish wheels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHow many come in a set?\u003c\/b\u003e Four, enough for one set of wheels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWill they fit my wheel?\u003c\/b\u003e They are made for standard tubeless valve holes. EMPI does not publish the hole size, so measure yours or ask us before ordering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAre you an authorized EMPI dealer?\u003c\/b\u003e Yes. Washburn's Metal is an authorized EMPI dealer, so this is genuine EMPI hardware shipped from our Orange, California shop.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\u003ch3\u003e\u003cb\u003eExplore Related Categories\u003c\/b\u003e\u003c\/h3\u003e\u003cp\u003e\u003ca href=\"\/collections\/wheels\"\u003eWheels\u003c\/a\u003e, \u003ca href=\"\/collections\/hardware\"\u003eHardware\u003c\/a\u003e, \u003ca href=\"\/collections\/all-vw-aircooled\"\u003eAir-Cooled VW\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eParts are legal for use on pre-pollution-controlled vehicles only.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eProp 65 Warning\u003c\/b\u003e\u003c\/h3\u003e\u003cp\u003eWARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.p65warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"EMPI","offers":[{"title":"Chrome Valve Stems, Set of 4 (00-9710-0)","offer_id":66941940334707,"sku":"00-9710-0","price":16.95,"currency_code":"USD","in_stock":false},{"title":"Flush Mount Valve Stems, Set of 4 (00-9514-0)","offer_id":66941940367475,"sku":"00-9514-0","price":28.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/00-9710-0-scaled.jpg?v=1792475680"},{"product_id":"empi-wheel-locks-m12x1-5-ball-seat-lock-bolts-or-mag-acorn-lock-nuts-vw-beetle-1949-67-5x205-70-2700-0","title":"EMPI Wheel Locks, M12x1.5 — Ball Seat Lock Bolts or Mag\/Acorn Lock Nuts | VW Beetle 1949–67 5x205 (70-2700-0)","description":"\u003ch2\u003e\u003cb\u003eEMPI M12x1.5 Wheel Locks — Ball Seat Bolts, Mag Nuts or Acorn Nuts, Set of 4\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cb\u003eShort answer:\u003c\/b\u003e EMPI wheel locks in M12x1.5, sold four to a set with a key. 70-2700-0 is a ball-seat lock bolt for factory-style 5x205 steel wheels on 1949–1967 Beetles, 1956–1966 Ghias and 1961–1965 Type 3s. 70-2702-0 (mag, shank-style) and 70-2705-0 (acorn) are lock nuts for wheels converted to M12x1.5 studs. Use one lock per wheel in place of one bolt or nut.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePart numbers:\u003c\/b\u003e EMPI 70-2700-0 \/ 7027000 · 70-2702-0 \/ 7027020 · 70-2705-0 \/ 7027050\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eFitment\u003c\/b\u003e\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1949–1967\u003c\/td\u003e\n\u003ctd\u003eVW Beetle (5x205)\u003c\/td\u003e\n\u003ctd\u003eFits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1956–1966\u003c\/td\u003e\n\u003ctd\u003eVW Karmann Ghia (5x205)\u003c\/td\u003e\n\u003ctd\u003eFits. The 1967 Ghia is 4x130 (M14).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1961–1965\u003c\/td\u003e\n\u003ctd\u003eVW Type 3 (5x205)\u003c\/td\u003e\n\u003ctd\u003eFits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAll\u003c\/td\u003e\n\u003ctd\u003eWheels converted to M12x1.5 studs\u003c\/td\u003e\n\u003ctd\u003eMag nut 70-2702-0 or acorn nut 70-2705-0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAll\u003c\/td\u003e\n\u003ctd\u003eEMPI 60° alloy wheels on 5x205\u003c\/td\u003e\n\u003ctd\u003e\n\u003cb\u003e70-2700-0 does not fit\u003c\/b\u003e — use 70-2706-0 (12mm 60°)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1966–1979\u003c\/td\u003e\n\u003ctd\u003e4-lug (M14) VW: Beetle 1968+, Ghia 1967+, Type 3 1966+\u003c\/td\u003e\n\u003ctd\u003e\n\u003cb\u003eDoes not fit\u003c\/b\u003e — use 70-2701-0 or 70-2707-0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003cb\u003eSpecifications\u003c\/b\u003e\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread\u003c\/td\u003e\n\u003ctd\u003eM12 x 1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e70-2700-0\u003c\/td\u003e\n\u003ctd\u003eLock bolt, VW bolt type, ball seat, 29 mm threaded length, set of 4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e70-2702-0\u003c\/td\u003e\n\u003ctd\u003eLock nut, mag (shank) style, set of 4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e70-2705-0\u003c\/td\u003e\n\u003ctd\u003eLock nut, acorn style, set of 4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKey\u003c\/td\u003e\n\u003ctd\u003eSecurity key included (per EMPI distributor listings)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e4 locking bolts or nuts\u003c\/li\u003e\n\u003cli\u003eSecurity key\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eNot Included\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eStandard lug hardware for the other holes\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eWhy It Matters\u003c\/b\u003e\u003c\/h3\u003e\u003cp\u003eLocks only work if they seat exactly like the hardware they replace. Factory VW steel wheels use a ball seat, so a 60° lock bolt would not hold properly. Mag-style nuts are for wheels with a flat seat and shank-type lug holes; acorn nuts are for 60° seats. Pick the one that matches the rest of your hardware.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eInstall Notes\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFit one lock per wheel; keep the key in the car with the jack.\u003c\/li\u003e\n\u003cli\u003eHand-start, then torque to the same spec as the other wheel hardware.\u003c\/li\u003e\n\u003cli\u003eDo not use an impact gun on lock hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eWhich EMPI lock fits stock 5x205 steel wheels?\u003c\/b\u003e 70-2700-0: M12x1.5 ball-seat lock bolts, set of 4 with key.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWhich lock fits EMPI alloy wheels on a wide-five?\u003c\/b\u003e EMPI alloys use a 60° seat, so use 70-2706-0, the 12mm 60° lock bolt.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWhat are the mag and acorn lock nuts for?\u003c\/b\u003e Wheels converted to M12x1.5 studs: mag nuts for shank-style lug holes, acorn nuts for 60° seats.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHow many locks do I need?\u003c\/b\u003e One per wheel. A set of 4 covers a car.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAre you an authorized EMPI dealer?\u003c\/b\u003e Yes. Washburn's Metal is an authorized EMPI dealer, so this is genuine EMPI hardware shipped from our Orange, California shop.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\u003ch3\u003e\u003cb\u003eExplore Related Categories\u003c\/b\u003e\u003c\/h3\u003e\u003cp\u003e\u003ca href=\"\/collections\/wheels\"\u003eWheels\u003c\/a\u003e, \u003ca href=\"\/collections\/vw-5x205-wheels\"\u003eVW 5x205 wheels\u003c\/a\u003e, \u003ca href=\"\/collections\/hardware\"\u003eHardware\u003c\/a\u003e, \u003ca href=\"\/search?q=lug+bolts\"\u003eLug bolts \u0026amp; nuts\u003c\/a\u003e, \u003ca href=\"\/collections\/all-vw-aircooled\"\u003eAir-Cooled VW\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eParts are legal for use on pre-pollution-controlled vehicles only.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eProp 65 Warning\u003c\/b\u003e\u003c\/h3\u003e\u003cp\u003eWARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.p65warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"EMPI","offers":[{"title":"M12 Ball Seat Lock Bolts, 4 + Key (70-2700-0)","offer_id":66941941776499,"sku":"70-2700-0","price":41.95,"currency_code":"USD","in_stock":true},{"title":"M12 Mag Lock Nuts, 4 (70-2702-0)","offer_id":66941941809267,"sku":"70-2702-0","price":22.95,"currency_code":"USD","in_stock":true},{"title":"M12 Acorn Lock Nuts, 4 (70-2705-0)","offer_id":66941941842035,"sku":"70-2705-0","price":22.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/70-2700-0.jpg?v=1792475727"},{"product_id":"empi-wheel-lock-bolts-m14x1-5-ball-seat-set-of-4-with-key-vw-beetle-1968-79-ghia-type-3-steel-wheels-70-2701-0","title":"EMPI Wheel Lock Bolts, M14x1.5 Ball Seat, Set of 4 with Key | VW Beetle 1968–79, Ghia, Type 3 Steel Wheels (70-2701-0)","description":"\u003ch2\u003e\u003cb\u003eEMPI 70-2701-0 Wheel Lock Bolts — M14x1.5 Ball Seat, Set of 4\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cb\u003eShort answer:\u003c\/b\u003e EMPI 70-2701-0 is a set of four M14x1.5 ball-seat wheel lock bolts with a security key, for factory-style 4x130 steel wheels on 1968–1979 Beetles and Super Beetles, 1967–1974 Ghias and 1966–1973 Type 3s. The VW bolt-type design has a 28 mm threaded length. Use one per wheel in place of a standard bolt.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePart numbers:\u003c\/b\u003e EMPI 70-2701-0 \/ 7027010\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eFitment\u003c\/b\u003e\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1968–1979\u003c\/td\u003e\n\u003ctd\u003eVW Beetle (4x130)\u003c\/td\u003e\n\u003ctd\u003eFits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1971–1979\u003c\/td\u003e\n\u003ctd\u003eVW Super Beetle\u003c\/td\u003e\n\u003ctd\u003eFits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1967–1974\u003c\/td\u003e\n\u003ctd\u003eVW Karmann Ghia (4x130)\u003c\/td\u003e\n\u003ctd\u003eFits (four-lug from the 1967 model year)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1966–1973\u003c\/td\u003e\n\u003ctd\u003eVW Type 3 (4x130)\u003c\/td\u003e\n\u003ctd\u003eFits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1968–1979\u003c\/td\u003e\n\u003ctd\u003eDune buggy \/ Baja on 4x130 drums or rotors\u003c\/td\u003e\n\u003ctd\u003eFits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAll\u003c\/td\u003e\n\u003ctd\u003eEMPI 60° alloy wheels (4x130)\u003c\/td\u003e\n\u003ctd\u003e\n\u003cb\u003eDoes not fit\u003c\/b\u003e — use 70-2707-0 (14mm 60°)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAll\u003c\/td\u003e\n\u003ctd\u003e5x130 911-style alloys\u003c\/td\u003e\n\u003ctd\u003eUse 70-2708-0 (14mm ball seat for 911 alloys)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1949–1967\u003c\/td\u003e\n\u003ctd\u003eWide-five VW (M12): Beetle to 1967, Ghia to 1966, Type 3 to 1965\u003c\/td\u003e\n\u003ctd\u003e\n\u003cb\u003eDoes not fit\u003c\/b\u003e — use 70-2700-0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003cb\u003eSpecifications\u003c\/b\u003e\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread\u003c\/td\u003e\n\u003ctd\u003eM14 x 1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeat\u003c\/td\u003e\n\u003ctd\u003eBall (radius)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThreaded length\u003c\/td\u003e\n\u003ctd\u003e28 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003e4 lock bolts + key\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.98 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e4 locking lug bolts\u003c\/li\u003e\n\u003cli\u003eSecurity key\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eNot Included\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eStandard lug bolts for the other holes\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eWhy It Matters\u003c\/b\u003e\u003c\/h3\u003e\u003cp\u003eStock 4-lug VW steel wheels use a ball seat, and a lock bolt must match it exactly. EMPI's 70-2701-0 keeps the factory seat and thread while protecting each wheel. For EMPI alloys use the 60° version, 70-2707-0, which we also stock.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eInstall Notes\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne lock bolt per wheel.\u003c\/li\u003e\n\u003cli\u003eHand-start, then torque to your factory wheel-bolt spec.\u003c\/li\u003e\n\u003cli\u003eKeep the key with the jack and spare.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eWhich EMPI wheel lock fits stock 4-lug VW steel wheels?\u003c\/b\u003e 70-2701-0: M14x1.5 ball seat, set of 4 with key.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWill it fit EMPI alloy wheels?\u003c\/b\u003e No. EMPI alloys are 60° seat; use 70-2707-0.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHow long is the thread?\u003c\/b\u003e EMPI lists a 28 mm threaded area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDoes it come with a key?\u003c\/b\u003e Yes, a security key is included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAre you an authorized EMPI dealer?\u003c\/b\u003e Yes. Washburn's Metal is an authorized EMPI dealer, so this is genuine EMPI hardware shipped from our Orange, California shop.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\u003ch3\u003e\u003cb\u003eExplore Related Categories\u003c\/b\u003e\u003c\/h3\u003e\u003cp\u003e\u003ca href=\"\/collections\/wheels\"\u003eWheels\u003c\/a\u003e, \u003ca href=\"\/collections\/vw-4x130-wheels\"\u003eVW 4x130 wheels\u003c\/a\u003e, \u003ca href=\"\/collections\/hardware\"\u003eHardware\u003c\/a\u003e, \u003ca href=\"\/collections\/all-vw-aircooled\"\u003eAir-Cooled VW\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eParts are legal for use on pre-pollution-controlled vehicles only.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eProp 65 Warning\u003c\/b\u003e\u003c\/h3\u003e\u003cp\u003eWARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.p65warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"EMPI","offers":[{"title":"Default Title","offer_id":66941942005875,"sku":"70-2701-0","price":41.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/70-2701-0-scaled.jpg?v=1792475763"},{"product_id":"empi-wheel-adapters-chevy-5x4-75-wheel-to-vw-5x205-hub-steel-26-55mm-pair-vw-beetle-1949-67-00-9502-0","title":"EMPI Wheel Adapters, Chevy 5x4.75 Wheel to VW 5x205 Hub — Steel 26.55mm, Pair | VW Beetle 1949–67 (00-9502-0)","description":"\u003ch2\u003e\u003cb\u003eEMPI 00-9502-0 Wheel Adapters — Chevy 5x4.75 Wheels on a VW Wide-Five Hub, Pair\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cb\u003eShort answer:\u003c\/b\u003e EMPI 00-9502-0 is a pair of 26.55 mm steel adapters that mount Chevy 5x4.75 in (5x120.65 mm) wheels on a VW wide-five 5x205 drum. The adapter bolts to the 5x205 hub and the Chevy wheel mounts to the adapter. It suits 1949–1967 Beetles, 1956–1966 Ghias, 1961–1965 Type 3s, Things and buggies running hot-rod or Rally-style wheels. Sold as a pair.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePart numbers:\u003c\/b\u003e EMPI 00-9502-0 \/ 0095020\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eFitment\u003c\/b\u003e\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1949–1967\u003c\/td\u003e\n\u003ctd\u003eVW Beetle (5x205)\u003c\/td\u003e\n\u003ctd\u003eFits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1956–1966\u003c\/td\u003e\n\u003ctd\u003eVW Karmann Ghia (5x205)\u003c\/td\u003e\n\u003ctd\u003eFits. The 1967 Ghia is 4x130.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1961–1965\u003c\/td\u003e\n\u003ctd\u003eVW Type 3 (5x205)\u003c\/td\u003e\n\u003ctd\u003eFits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1973–1974\u003c\/td\u003e\n\u003ctd\u003eVW Thing (181)\u003c\/td\u003e\n\u003ctd\u003eFits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1950–1970\u003c\/td\u003e\n\u003ctd\u003eVW Bus (5x205)\u003c\/td\u003e\n\u003ctd\u003eNot listed by EMPI; confirm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1966–1979\u003c\/td\u003e\n\u003ctd\u003e4-lug (4x130) VW: Beetle 1968+, Ghia 1967+, Type 3 1966+\u003c\/td\u003e\n\u003ctd\u003e\n\u003cb\u003eDoes not fit\u003c\/b\u003e — use 00-9504-0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003cb\u003eSpecifications\u003c\/b\u003e\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWheel side (outer face)\u003c\/td\u003e\n\u003ctd\u003e5x4.75 in (Chevy)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHub side (inner face)\u003c\/td\u003e\n\u003ctd\u003e5x205 VW wide-five drum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThickness\u003c\/td\u003e\n\u003ctd\u003e26.55 mm (about 1 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold as\u003c\/td\u003e\n\u003ctd\u003ePair (2 adapters)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e5.4 lb per pair\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2 adapters\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eNot Included\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHub-side bolts and wheel-side lug hardware: not stated by EMPI; confirming with EMPI. Ask us before ordering and we will quote the exact hardware.\u003c\/li\u003e\n\u003cli\u003eWheels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eWhy It Matters\u003c\/b\u003e\u003c\/h3\u003e\u003cp\u003eThis is the classic hot-rod and buggy adapter: it opens up the huge selection of Chevy-pattern wheels for a wide-five VW. Direction: \u003cb\u003ewheel 5x4.75 Chevy, hub 5x205 VW\u003c\/b\u003e. At about 1 inch thick it widens track noticeably, so check fender and steering clearance.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eInstall Notes\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eClean the hub face so the adapter sits flat.\u003c\/li\u003e\n\u003cli\u003eTorque hub-side and wheel-side hardware to the vehicle's factory wheel spec; re-check after 50 miles.\u003c\/li\u003e\n\u003cli\u003eCheck brake, suspension and fender clearance before driving; adapters move the wheel outward.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eWhat does EMPI 00-9502-0 do?\u003c\/b\u003e It lets Chevy 5x4.75 in pattern wheels bolt onto a 5x205 wide-five VW drum.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWhich side is the wheel side?\u003c\/b\u003e The Chevy 5x4.75 face; the adapter bolts to the VW 5x205 hub.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDoes it fit a 4-lug VW?\u003c\/b\u003e No. For 4x130 cars use EMPI 00-9504-0.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHow thick is it?\u003c\/b\u003e 26.55 mm, about 1 inch, so the wheel moves out that much.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAre you an authorized EMPI dealer?\u003c\/b\u003e Yes. Washburn's Metal is an authorized EMPI dealer, so this is genuine EMPI hardware shipped from our Orange, California shop.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\u003ch3\u003e\u003cb\u003eExplore Related Categories\u003c\/b\u003e\u003c\/h3\u003e\u003cp\u003e\u003ca href=\"\/collections\/wheels\"\u003eWheels\u003c\/a\u003e, \u003ca href=\"\/collections\/vw-5x205-wheels\"\u003eVW 5x205 wheels\u003c\/a\u003e, \u003ca href=\"\/collections\/hardware\"\u003eHardware\u003c\/a\u003e, \u003ca href=\"\/search?q=wheel+adapter\"\u003eWheel adapters\u003c\/a\u003e, \u003ca href=\"\/collections\/all-vw-aircooled\"\u003eAir-Cooled VW\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eParts are legal for use on pre-pollution-controlled vehicles only.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eProp 65 Warning\u003c\/b\u003e\u003c\/h3\u003e\u003cp\u003eWARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.p65warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"EMPI","offers":[{"title":"Default Title","offer_id":66941942628467,"sku":"00-9502-0","price":78.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/00-9502-0.jpg?v=1792475867"},{"product_id":"empi-wheel-adapters-chevy-5x4-75-wheel-to-vw-4x130-hub-aluminum-22-35mm-pair-vw-beetle-1968-79-00-9504-0","title":"EMPI Wheel Adapters, Chevy 5x4.75 Wheel to VW 4x130 Hub — Aluminum 22.35mm, Pair | VW Beetle 1968–79 (00-9504-0)","description":"\u003ch2\u003e\u003cb\u003eEMPI 00-9504-0 Wheel Adapters — Chevy 5x4.75 Wheels on a 4-Lug VW Hub, Aluminum, Pair\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cb\u003eShort answer:\u003c\/b\u003e EMPI 00-9504-0 is a pair of 22.35 mm aluminum adapters that mount Chevy 5x4.75 in wheels on a 4x130 VW drum or rotor. The adapter bolts to the 4-lug hub; the Chevy wheel mounts to the adapter. EMPI lists it for 1968–1979 Beetle, 1966–1973 Type 3, 1967–1974 Ghia and Baja. Replacement studs are 00-9588-0 (standard) and 00-9580-0 (offset).\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePart numbers:\u003c\/b\u003e EMPI 00-9504-0 \/ 0095040\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eFitment\u003c\/b\u003e\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1968–1979\u003c\/td\u003e\n\u003ctd\u003eVW Beetle (4x130)\u003c\/td\u003e\n\u003ctd\u003eFits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1971–1979\u003c\/td\u003e\n\u003ctd\u003eVW Super Beetle\u003c\/td\u003e\n\u003ctd\u003eFits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1967–1974\u003c\/td\u003e\n\u003ctd\u003eVW Karmann Ghia (4x130)\u003c\/td\u003e\n\u003ctd\u003eFits (four-lug from the 1967 model year)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1966–1973\u003c\/td\u003e\n\u003ctd\u003eVW Type 3 (4x130)\u003c\/td\u003e\n\u003ctd\u003eFits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1968–1979\u003c\/td\u003e\n\u003ctd\u003eDune buggy \/ Baja on 4x130 drums or rotors\u003c\/td\u003e\n\u003ctd\u003eFits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1949–1967\u003c\/td\u003e\n\u003ctd\u003eWide-five VW: Beetle to 1967, Ghia to 1966, Type 3 to 1965\u003c\/td\u003e\n\u003ctd\u003e\n\u003cb\u003eDoes not fit\u003c\/b\u003e — use 00-9502-0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003cb\u003eSpecifications\u003c\/b\u003e\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWheel side (outer face)\u003c\/td\u003e\n\u003ctd\u003e5x4.75 in (Chevy)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHub side (inner face)\u003c\/td\u003e\n\u003ctd\u003e4x130 VW drum or rotor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eAluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThickness\u003c\/td\u003e\n\u003ctd\u003e22.35 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold as\u003c\/td\u003e\n\u003ctd\u003ePair (2 adapters)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e4.7 lb per pair\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReplacement studs\u003c\/td\u003e\n\u003ctd\u003e00-9588-0 standard, 00-9580-0 offset (EMPI)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2 adapters\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eNot Included\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHub-side bolts and wheel-side lug hardware: not stated by EMPI; confirming with EMPI. Ask us before ordering and we will quote the exact hardware.\u003c\/li\u003e\n\u003cli\u003eWheels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eWhy It Matters\u003c\/b\u003e\u003c\/h3\u003e\u003cp\u003eIt is the 4-lug counterpart of EMPI's Chevy-to-wide-five adapter, used on Bajas and street Beetles running American-pattern wheels. Direction: \u003cb\u003ewheel 5x4.75 Chevy, hub 4x130 VW\u003c\/b\u003e. EMPI sells replacement studs for it: a standard stud (00-9588-0) and an offset stud (00-9580-0).\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eInstall Notes\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eClean the hub face so the adapter sits flat.\u003c\/li\u003e\n\u003cli\u003eTorque hub-side and wheel-side hardware to the vehicle's factory wheel spec; re-check after 50 miles.\u003c\/li\u003e\n\u003cli\u003eCheck brake, suspension and fender clearance before driving; adapters move the wheel outward.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eWhat does EMPI 00-9504-0 do?\u003c\/b\u003e It lets Chevy 5x4.75 in wheels bolt to a 4x130 VW Beetle, Ghia or Type 3 hub.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWhich side is the wheel side?\u003c\/b\u003e The Chevy 5x4.75 face; the adapter bolts to the 4x130 hub.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCan I get replacement studs?\u003c\/b\u003e Yes. EMPI lists 00-9588-0 (standard stud) and 00-9580-0 (offset stud) for this adapter; ask us to order them.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHow thick is it?\u003c\/b\u003e 22.35 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAre you an authorized EMPI dealer?\u003c\/b\u003e Yes. Washburn's Metal is an authorized EMPI dealer, so this is genuine EMPI hardware shipped from our Orange, California shop.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\u003ch3\u003e\u003cb\u003eExplore Related Categories\u003c\/b\u003e\u003c\/h3\u003e\u003cp\u003e\u003ca href=\"\/collections\/wheels\"\u003eWheels\u003c\/a\u003e, \u003ca href=\"\/collections\/vw-4x130-wheels\"\u003eVW 4x130 wheels\u003c\/a\u003e, \u003ca href=\"\/collections\/hardware\"\u003eHardware\u003c\/a\u003e, \u003ca href=\"\/search?q=wheel+adapter\"\u003eWheel adapters\u003c\/a\u003e, \u003ca href=\"\/collections\/all-vw-aircooled\"\u003eAir-Cooled VW\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eParts are legal for use on pre-pollution-controlled vehicles only.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eProp 65 Warning\u003c\/b\u003e\u003c\/h3\u003e\u003cp\u003eWARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.p65warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"EMPI","offers":[{"title":"Default Title","offer_id":66941942988915,"sku":"00-9504-0","price":107.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/00-9504-0.jpg?v=1792475949"},{"product_id":"empi-aluminum-wheel-spacers-5x112-3-8-in-thick-pair-vw-bus-1971-1979-16-9915-0","title":"EMPI Aluminum Wheel Spacers, 5x112, 3\/8 in Thick, Pair | VW Bus 1971–1979 (16-9915-0)","description":"\u003ch2\u003e\u003cb\u003eEMPI 16-9915-0 Wheel Spacers — 5x112, 3\/8 in Aluminum, Pair\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cb\u003eShort answer:\u003c\/b\u003e EMPI 16-9915-0 is a pair of 3\/8 in (9.5 mm) aluminum wheel spacers in the 5x112 pattern, for the 1971–1979 VW Bay Window Bus. They push each wheel out 3\/8 in for wheel or tire clearance or a wider stance. Because the Bus uses studs, the stud length must be checked after adding a spacer. Sold as a pair, enough for one axle.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePart numbers:\u003c\/b\u003e EMPI 16-9915-0 \/ 1699150\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eFitment\u003c\/b\u003e\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1971–1979\u003c\/td\u003e\n\u003ctd\u003eVW Bus (Bay Window), 5x112\u003c\/td\u003e\n\u003ctd\u003eFits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1980–1991\u003c\/td\u003e\n\u003ctd\u003eVW Vanagon (5x112)\u003c\/td\u003e\n\u003ctd\u003eNot listed by EMPI; confirm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1950–1970\u003c\/td\u003e\n\u003ctd\u003eVW Bus (5x205)\u003c\/td\u003e\n\u003ctd\u003e\u003cb\u003eDoes not fit\u003c\/b\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003cb\u003eSpecifications\u003c\/b\u003e\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePattern\u003c\/td\u003e\n\u003ctd\u003e5x112\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThickness\u003c\/td\u003e\n\u003ctd\u003e3\/8 in (9.5 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eAluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold as\u003c\/td\u003e\n\u003ctd\u003ePair\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.21 lb per pair\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2 aluminum spacers\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eNot Included\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eLonger studs, if needed for full thread engagement (confirming EMPI's recommendation)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eWhy It Matters\u003c\/b\u003e\u003c\/h3\u003e\u003cp\u003eA thin spacer is the easiest fix when an aftermarket wheel's offset puts the tire too close to the suspension, or when you want a slightly wider track. On a stud-mount Bus, the wheel nut must still engage enough thread after the spacer is added; measure before you drive.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eInstall Notes\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eClean the hub face.\u003c\/li\u003e\n\u003cli\u003eCheck that the nut engages at least as many turns as the stud diameter after the spacer is fitted.\u003c\/li\u003e\n\u003cli\u003eTorque wheel nuts to spec (Ratwell lists 94 ft-lb for the 1971+ Bus) and re-check after 50 miles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eDo wheel spacers fit a 1971–1979 VW Bus?\u003c\/b\u003e Yes. EMPI 16-9915-0 is a 5x112 pattern spacer for the Bay Bus.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHow thick are they?\u003c\/b\u003e 3\/8 in, about 9.5 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDo I need longer studs?\u003c\/b\u003e Check thread engagement after fitting. EMPI does not specify; we are confirming.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHow many come in the box?\u003c\/b\u003e Two, a pair for one axle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAre you an authorized EMPI dealer?\u003c\/b\u003e Yes. Washburn's Metal is an authorized EMPI dealer, so this is genuine EMPI hardware shipped from our Orange, California shop.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\u003ch3\u003e\u003cb\u003eExplore Related Categories\u003c\/b\u003e\u003c\/h3\u003e\u003cp\u003e\u003ca href=\"\/collections\/wheels\"\u003eWheels\u003c\/a\u003e, \u003ca href=\"\/collections\/vw-bus-5x112-wheels\"\u003eBay Bus 5x112 wheels\u003c\/a\u003e, \u003ca href=\"\/collections\/hardware\"\u003eHardware\u003c\/a\u003e, \u003ca href=\"\/collections\/vw-bus\"\u003eVW Bus parts\u003c\/a\u003e, \u003ca href=\"\/collections\/all-vw-aircooled\"\u003eAir-Cooled VW\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eParts are legal for use on pre-pollution-controlled vehicles only.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eProp 65 Warning\u003c\/b\u003e\u003c\/h3\u003e\u003cp\u003eWARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.p65warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"EMPI","offers":[{"title":"Default Title","offer_id":66941944758387,"sku":"16-9915-0","price":79.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/16-9915-0.jpg?v=1792476097"},{"product_id":"empi-double-drilled-wheel-spacers-4x130-5x130-pair-1-4-3-8-or-1-2-in-vw-beetle-1968-79-porsche-911","title":"EMPI Double-Drilled Wheel Spacers, 4x130 \/ 5x130, Pair — 1\/4, 3\/8 or 1\/2 in | VW Beetle 1968–79, Porsche 911","description":"\u003ch2\u003e\u003cb\u003eEMPI Double-Drilled Wheel Spacers — 4x130 and 5x130, Aluminum, Pair\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cb\u003eShort answer:\u003c\/b\u003e EMPI double-drilled aluminum wheel spacers fit both the 4x130 VW pattern and the 5x130 Porsche pattern, sold as a pair. Choose 1\/4 in, 3\/8 in or 1\/2 in. They suit 1968–1979 Beetles and Super Beetles, 1967–1974 Ghias, 1966–1973 Type 3s and 5x130 cars or conversions. Longer wheel bolts or studs are needed.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePart numbers:\u003c\/b\u003e EMPI 18-1114-0 (1\/4 in) · 16-9926-0 (3\/8 in) · 18-1113-0 (1\/2 in)\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eFitment\u003c\/b\u003e\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1968–1979\u003c\/td\u003e\n\u003ctd\u003eVW Beetle (4x130)\u003c\/td\u003e\n\u003ctd\u003eFits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1971–1979\u003c\/td\u003e\n\u003ctd\u003eVW Super Beetle\u003c\/td\u003e\n\u003ctd\u003eFits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1967–1974\u003c\/td\u003e\n\u003ctd\u003eVW Karmann Ghia (4x130)\u003c\/td\u003e\n\u003ctd\u003eFits (four-lug from the 1967 model year)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1966–1973\u003c\/td\u003e\n\u003ctd\u003eVW Type 3 (4x130)\u003c\/td\u003e\n\u003ctd\u003eFits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1965–1989\u003c\/td\u003e\n\u003ctd\u003ePorsche 911 \/ 912 and VW 5x130 conversions\u003c\/td\u003e\n\u003ctd\u003eFits (5x130 drilling)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1949–1967\u003c\/td\u003e\n\u003ctd\u003eWide-five VW: Beetle to 1967, Ghia to 1966, Type 3 to 1965\u003c\/td\u003e\n\u003ctd\u003e\n\u003cb\u003eDoes not fit\u003c\/b\u003e — use the 5x205 spacers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1950–1979\u003c\/td\u003e\n\u003ctd\u003eVW Bus\u003c\/td\u003e\n\u003ctd\u003e\u003cb\u003eDoes not fit\u003c\/b\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003cb\u003eSpecifications\u003c\/b\u003e\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePatterns\u003c\/td\u003e\n\u003ctd\u003e4x130 and 5x130 (double drilled)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eAluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThickness options\u003c\/td\u003e\n\u003ctd\u003e1\/4 in (6.4 mm), 3\/8 in (9.5 mm), 1\/2 in (12.7 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold as\u003c\/td\u003e\n\u003ctd\u003ePair (single spacers exist as -7 part numbers)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeights\u003c\/td\u003e\n\u003ctd\u003e1.06 \/ 1.62 \/ 2.01 lb per pair\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2 aluminum spacers in the thickness you choose\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eNot Included\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eLonger lug bolts or studs (length depends on thickness; ask us)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eWhy It Matters\u003c\/b\u003e\u003c\/h3\u003e\u003cp\u003eOne spacer covers both common 130 mm patterns, which is handy for 4-lug cars and for cars converted to 5x130. Thin spacers are the standard fix for wheels that rub on suspension or need a little more track. Bolts or studs must be lengthened by the spacer thickness.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eInstall Notes\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eUse lug bolts or studs lengthened by the spacer thickness, with the seat that matches the wheel.\u003c\/li\u003e\n\u003cli\u003eTorque to the factory spec and re-check after 50 miles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eDo these fit a 4-lug Beetle?\u003c\/b\u003e Yes. They are drilled for 4x130 (VW 4-lug) and 5x130 (Porsche).\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWhat thickness should I choose?\u003c\/b\u003e Use the thinnest that solves the clearance problem: 1\/4 in, 3\/8 in or 1\/2 in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDo I need longer bolts?\u003c\/b\u003e Yes, longer by the spacer thickness.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAre they a pair?\u003c\/b\u003e Yes. Each part number is a pair.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAre you an authorized EMPI dealer?\u003c\/b\u003e Yes. Washburn's Metal is an authorized EMPI dealer, so this is genuine EMPI hardware shipped from our Orange, California shop.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\u003ch3\u003e\u003cb\u003eExplore Related Categories\u003c\/b\u003e\u003c\/h3\u003e\u003cp\u003e\u003ca href=\"\/collections\/wheels\"\u003eWheels\u003c\/a\u003e, \u003ca href=\"\/collections\/5x130-porsche-pattern-wheels\"\u003e5x130 Porsche-pattern wheels\u003c\/a\u003e, \u003ca href=\"\/collections\/vw-4x130-wheels\"\u003eVW 4x130 wheels\u003c\/a\u003e, \u003ca href=\"\/collections\/hardware\"\u003eHardware\u003c\/a\u003e, \u003ca href=\"\/collections\/all-vw-aircooled\"\u003eAir-Cooled VW\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eParts are legal for use on pre-pollution-controlled vehicles only.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eProp 65 Warning\u003c\/b\u003e\u003c\/h3\u003e\u003cp\u003eWARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.p65warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"EMPI","offers":[{"title":"1\/4 in (18-1114-0)","offer_id":66941945577587,"sku":"18-1114-0","price":82.95,"currency_code":"USD","in_stock":true},{"title":"3\/8 in (16-9926-0)","offer_id":66941945610355,"sku":"16-9926-0","price":79.95,"currency_code":"USD","in_stock":true},{"title":"1\/2 in (18-1113-0)","offer_id":66941945643123,"sku":"18-1113-0","price":92.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/18-1114-0.jpg?v=1792476252"},{"product_id":"empi-chrome-stud-nut-kit-m12x1-5-5-pair-60-acorn-or-mag-vw-beetle-1949-67-5x205-00-9533-0-00-9510-0","title":"EMPI Chrome Stud \u0026 Nut Kit, M12x1.5, 5 Pair — 60° Acorn or Mag | VW Beetle 1949–67 5x205 (00-9533-0 \/ 00-9510-0)","description":"\u003ch2\u003e\u003cb\u003eEMPI Chrome Wheel Stud \u0026amp; Nut Kit — M12x1.5, 5 Pair, for 5x205 Drums\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cb\u003eShort answer:\u003c\/b\u003e EMPI's chrome stud-and-nut kits convert one 5x205 wheel from lug bolts to studs and nuts: five M12x1.5 studs that thread into the drum plus five chrome nuts. Choose 00-9533-0 with 60° acorn nuts for steel wheels or 00-9510-0 with mag-wheel nuts and flat washers for mag wheels. For 1949–1967 Beetles, 1956–1966 Ghias and 1961–1965 Type 3s; four kits do a car.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePart numbers:\u003c\/b\u003e EMPI 00-9533-0 \/ 0095330 (60°, steel wheels) · 00-9510-0 \/ 0095100 (mag, with washers)\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eFitment\u003c\/b\u003e\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1949–1967\u003c\/td\u003e\n\u003ctd\u003eVW Beetle (5x205)\u003c\/td\u003e\n\u003ctd\u003eFits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1956–1966\u003c\/td\u003e\n\u003ctd\u003eVW Karmann Ghia (5x205)\u003c\/td\u003e\n\u003ctd\u003eFits. The 1967 Ghia is 4x130 (M14).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1961–1965\u003c\/td\u003e\n\u003ctd\u003eVW Type 3 (5x205)\u003c\/td\u003e\n\u003ctd\u003eFits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1973–1974\u003c\/td\u003e\n\u003ctd\u003eVW Thing (181)\u003c\/td\u003e\n\u003ctd\u003eFits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1966–1979\u003c\/td\u003e\n\u003ctd\u003e4-lug VW (M14): Beetle 1968+, Ghia 1967+, Type 3 1966+\u003c\/td\u003e\n\u003ctd\u003e\n\u003cb\u003eDoes not fit\u003c\/b\u003e — use the M14 to 1\/2-20 kits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAll\u003c\/td\u003e\n\u003ctd\u003eM14 wide-five Bus\u003c\/td\u003e\n\u003ctd\u003e\n\u003cb\u003eDoes not fit\u003c\/b\u003e — M12 thread only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003cb\u003eSpecifications\u003c\/b\u003e\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eStud thread\u003c\/td\u003e\n\u003ctd\u003eM12x1.5 (per EMPI)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003e5 studs + 5 nuts (one wheel)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e00-9533-0 nuts\u003c\/td\u003e\n\u003ctd\u003eChrome, 60° acorn, for steel wheels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e00-9510-0 nuts\u003c\/td\u003e\n\u003ctd\u003eChrome mag-wheel nuts with flat washers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.02 \/ 1.08 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e5 studs\u003c\/li\u003e\n\u003cli\u003e5 chrome nuts\u003c\/li\u003e\n\u003cli\u003eFlat washers (00-9510-0 only)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eNot Included\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eEnough for one wheel only; order 4 for a car\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eWhy It Matters\u003c\/b\u003e\u003c\/h3\u003e\u003cp\u003eStuds make wheel changes easier because the wheel hangs on the studs while you start the nuts, and they are the look many vintage and buggy builds want. The nut must match the wheel: 60° acorn for cone-seat steel wheels, mag-wheel nuts with washers for flat-seat mag wheels.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eInstall Notes\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThread studs into the drum fully by hand, then snug them; use thread locker if EMPI's instructions call for it.\u003c\/li\u003e\n\u003cli\u003eTorque nuts to your wheel manufacturer's spec in a star pattern; re-check after 50 miles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eHow do I convert a wide-five VW to studs?\u003c\/b\u003e Use one EMPI kit per wheel: 00-9533-0 for 60° steel wheels or 00-9510-0 for mag wheels. Each has five M12x1.5 studs and nuts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHow many kits do I need?\u003c\/b\u003e Four, one per wheel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWhat is the difference between the two kits?\u003c\/b\u003e 00-9533-0 has 60° acorn nuts for steel wheels; 00-9510-0 has mag-wheel nuts with flat washers for mag wheels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDo these fit a 1968 Beetle?\u003c\/b\u003e No. 4-lug cars use M14 threads; see the M14 to 1\/2-20 kits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAre you an authorized EMPI dealer?\u003c\/b\u003e Yes. Washburn's Metal is an authorized EMPI dealer, so this is genuine EMPI hardware shipped from our Orange, California shop.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\u003ch3\u003e\u003cb\u003eExplore Related Categories\u003c\/b\u003e\u003c\/h3\u003e\u003cp\u003e\u003ca href=\"\/collections\/wheels\"\u003eWheels\u003c\/a\u003e, \u003ca href=\"\/collections\/vw-5x205-wheels\"\u003eVW 5x205 wheels\u003c\/a\u003e, \u003ca href=\"\/collections\/hardware\"\u003eHardware\u003c\/a\u003e, \u003ca href=\"\/collections\/all-vw-aircooled\"\u003eAir-Cooled VW\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eParts are legal for use on pre-pollution-controlled vehicles only.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eProp 65 Warning\u003c\/b\u003e\u003c\/h3\u003e\u003cp\u003eWARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.p65warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"EMPI","offers":[{"title":"60° Acorn, for Steel Wheels (00-9533-0)","offer_id":66941945938035,"sku":"00-9533-0","price":13.95,"currency_code":"USD","in_stock":true},{"title":"Mag-Wheel Nuts + Flat Washers (00-9510-0)","offer_id":66941945970803,"sku":"00-9510-0","price":15.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/00-9533-0.jpg?v=1792476302"},{"product_id":"empi-chrome-stud-nut-kit-m14x1-5-to-1-2-20-4-pair-60-acorn-or-mag-vw-beetle-1968-79-4x130-00-9534-0","title":"EMPI Chrome Stud \u0026 Nut Kit, M14x1.5 to 1\/2-20, 4 Pair — 60° Acorn or Mag | VW Beetle 1968–79 4x130 (00-9534-0)","description":"\u003ch2\u003e\u003cb\u003eEMPI Chrome Wheel Stud \u0026amp; Nut Kit — M14x1.5 to 1\/2-20, 4 Pair, for 4x130 Hubs\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cb\u003eShort answer:\u003c\/b\u003e EMPI's chrome stud-and-nut kits convert one 4x130 wheel from lug bolts to studs: four studs that thread into the VW hub with M14x1.5 and take 1\/2-20 nuts on the outside, plus four chrome nuts. Choose 00-9534-0 with 60° acorn nuts for steel wheels or 00-9511-0 with mag-wheel nuts and flat washers. Fits 1968–1979 Beetles, 1967–1974 Ghias, 1966–1973 Type 3s; four kits do a car.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePart numbers:\u003c\/b\u003e EMPI 00-9534-0 \/ 0095340 (60°, steel wheels) · 00-9511-0 \/ 0095110 (mag, with washers)\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eFitment\u003c\/b\u003e\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1968–1979\u003c\/td\u003e\n\u003ctd\u003eVW Beetle (4x130)\u003c\/td\u003e\n\u003ctd\u003eFits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1971–1979\u003c\/td\u003e\n\u003ctd\u003eVW Super Beetle\u003c\/td\u003e\n\u003ctd\u003eFits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1967–1974\u003c\/td\u003e\n\u003ctd\u003eVW Karmann Ghia (4x130)\u003c\/td\u003e\n\u003ctd\u003eFits (four-lug from the 1967 model year)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1966–1973\u003c\/td\u003e\n\u003ctd\u003eVW Type 3 (4x130)\u003c\/td\u003e\n\u003ctd\u003eFits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1968–1979\u003c\/td\u003e\n\u003ctd\u003eDune buggy \/ Baja on 4x130 drums or rotors\u003c\/td\u003e\n\u003ctd\u003eFits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1949–1967\u003c\/td\u003e\n\u003ctd\u003eWide-five VW (M12): Beetle to 1967, Ghia to 1966, Type 3 to 1965\u003c\/td\u003e\n\u003ctd\u003e\n\u003cb\u003eDoes not fit\u003c\/b\u003e — use the M12 kits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003cb\u003eSpecifications\u003c\/b\u003e\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eStud thread\u003c\/td\u003e\n\u003ctd\u003eM14x1.5 (hub side) to 1\/2-20 (nut side)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003e4 studs + 4 nuts (one wheel)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e00-9534-0 nuts\u003c\/td\u003e\n\u003ctd\u003eChrome 1\/2-20, 60° acorn, for steel wheels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e00-9511-0 nuts\u003c\/td\u003e\n\u003ctd\u003eChrome 1\/2-20 mag-wheel nuts with flat washers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.86 \/ 0.89 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e4 studs\u003c\/li\u003e\n\u003cli\u003e4 chrome nuts\u003c\/li\u003e\n\u003cli\u003eFlat washers (00-9511-0 only)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eNot Included\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eEnough for one wheel only; order 4 for a car\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eWhy It Matters\u003c\/b\u003e\u003c\/h3\u003e\u003cp\u003eThe 1\/2-20 outer thread opens up the huge range of American-thread lug nuts and is the standard for many buggy and hot-rod wheels. Match the nut to the wheel: 60° acorn for cone-seat steel wheels, mag-wheel nuts with washers for flat-seat mag wheels.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eInstall Notes\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThread studs fully into the hub by hand, then snug them.\u003c\/li\u003e\n\u003cli\u003eTorque nuts to the wheel manufacturer's spec in a cross pattern; re-check after 50 miles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eHow do I convert a 4-lug VW to studs?\u003c\/b\u003e Use one EMPI kit per wheel: four M14x1.5 to 1\/2-20 studs and four chrome nuts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWhich nut style do I need?\u003c\/b\u003e 60° acorn (00-9534-0) for cone-seat steel wheels; mag nuts with washers (00-9511-0) for flat-seat mag wheels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHow many kits for a car?\u003c\/b\u003e Four.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCan I get the studs alone?\u003c\/b\u003e Yes, EMPI 00-9515-0 is the M14x1.5 to 1\/2-20 stud set of 4.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAre you an authorized EMPI dealer?\u003c\/b\u003e Yes. Washburn's Metal is an authorized EMPI dealer, so this is genuine EMPI hardware shipped from our Orange, California shop.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\u003ch3\u003e\u003cb\u003eExplore Related Categories\u003c\/b\u003e\u003c\/h3\u003e\u003cp\u003e\u003ca href=\"\/collections\/wheels\"\u003eWheels\u003c\/a\u003e, \u003ca href=\"\/collections\/vw-4x130-wheels\"\u003eVW 4x130 wheels\u003c\/a\u003e, \u003ca href=\"\/collections\/hardware\"\u003eHardware\u003c\/a\u003e, \u003ca href=\"\/collections\/all-vw-aircooled\"\u003eAir-Cooled VW\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eParts are legal for use on pre-pollution-controlled vehicles only.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eProp 65 Warning\u003c\/b\u003e\u003c\/h3\u003e\u003cp\u003eWARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.p65warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"EMPI","offers":[{"title":"60° Acorn, for Steel Wheels (00-9534-0)","offer_id":66941946134643,"sku":"00-9534-0","price":11.95,"currency_code":"USD","in_stock":true},{"title":"Mag-Wheel Nuts + Flat Washers (00-9511-0)","offer_id":66941946167411,"sku":"00-9511-0","price":15.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/00-9534-0-new-scaled.jpg?v=1792476350"},{"product_id":"empi-chrome-steel-60-lug-nuts-m12x1-5-set-of-5-or-m14x1-5-set-of-4-vw-stud-conversions-buggies-70-2870-0","title":"EMPI Chrome Steel 60° Lug Nuts — M12x1.5 Set of 5 or M14x1.5 Set of 4 | VW Stud Conversions \u0026 Buggies (70-2870-0)","description":"\u003ch2\u003e\u003cb\u003eEMPI Chrome Steel 60° Lug Nuts — M12x1.5 or M14x1.5\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cb\u003eShort answer:\u003c\/b\u003e EMPI chrome steel lug nuts with a 60° cone seat, for wheels mounted on studs. 70-2870-0 is five M12x1.5 nuts (one wide-five wheel on M12 studs); 70-2872-0 is four M14x1.5 nuts (one 4-lug wheel on M14 studs). Use them with 60° cone-seat wheels only. Stock VW hubs use bolts, so these apply after a stud conversion.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePart numbers:\u003c\/b\u003e EMPI 70-2870-0 \/ 7028700 (M12, 5) · 70-2872-0 \/ 7028720 (M14, 4)\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eFitment\u003c\/b\u003e\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1949–1967\u003c\/td\u003e\n\u003ctd\u003eWide-five VW converted to M12x1.5 studs\u003c\/td\u003e\n\u003ctd\u003e70-2870-0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1968–1979\u003c\/td\u003e\n\u003ctd\u003e4-lug VW converted to M14x1.5 studs\u003c\/td\u003e\n\u003ctd\u003e70-2872-0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAll\u003c\/td\u003e\n\u003ctd\u003eStock VW bolt hubs\u003c\/td\u003e\n\u003ctd\u003e\n\u003cb\u003eDoes not apply\u003c\/b\u003e — hubs take bolts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAll\u003c\/td\u003e\n\u003ctd\u003eBall-seat wheels\u003c\/td\u003e\n\u003ctd\u003e\n\u003cb\u003eDoes not fit\u003c\/b\u003e — 60° seat only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003cb\u003eSpecifications\u003c\/b\u003e\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeat\u003c\/td\u003e\n\u003ctd\u003e60° cone (acorn)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial \/ finish\u003c\/td\u003e\n\u003ctd\u003eChrome-plated steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e70-2870-0\u003c\/td\u003e\n\u003ctd\u003eM12x1.5, set of 5, 0.765 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e70-2872-0\u003c\/td\u003e\n\u003ctd\u003eM14x1.5, set of 4, 0.545 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eChrome steel 60° lug nuts in the thread and count you choose\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eNot Included\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eStuds (see EMPI 00-9516-0, 00-9484-0, 00-9517-0)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eWhy It Matters\u003c\/b\u003e\u003c\/h3\u003e\u003cp\u003eOnce a VW is converted to studs, the nut seat must match the wheel just as a bolt would. These chrome steel nuts are EMPI's 60° option for cone-seat aftermarket wheels; one set does one wheel.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eInstall Notes\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStart by hand, tighten in a star pattern, torque to the wheel maker's spec.\u003c\/li\u003e\n\u003cli\u003eRe-check after 50 miles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eWhich nut fits M12 studs on a wide-five?\u003c\/b\u003e 70-2870-0, five M12x1.5 60° chrome nuts for one wheel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWhich nut fits M14 studs on a 4-lug?\u003c\/b\u003e 70-2872-0, four M14x1.5 60° chrome nuts for one wheel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWill these work with stock VW steel wheels?\u003c\/b\u003e No. Stock wheels are ball seat; these are 60° cone.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHow many sets for a car?\u003c\/b\u003e Four, one per wheel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAre you an authorized EMPI dealer?\u003c\/b\u003e Yes. Washburn's Metal is an authorized EMPI dealer, so this is genuine EMPI hardware shipped from our Orange, California shop.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\u003ch3\u003e\u003cb\u003eExplore Related Categories\u003c\/b\u003e\u003c\/h3\u003e\u003cp\u003e\u003ca href=\"\/collections\/wheels\"\u003eWheels\u003c\/a\u003e, \u003ca href=\"\/collections\/vw-4x130-wheels\"\u003eVW 4x130 wheels\u003c\/a\u003e, \u003ca href=\"\/collections\/vw-5x205-wheels\"\u003eVW 5x205 wheels\u003c\/a\u003e, \u003ca href=\"\/collections\/hardware\"\u003eHardware\u003c\/a\u003e, \u003ca href=\"\/collections\/all-vw-aircooled\"\u003eAir-Cooled VW\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eParts are legal for use on pre-pollution-controlled vehicles only.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eProp 65 Warning\u003c\/b\u003e\u003c\/h3\u003e\u003cp\u003eWARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.p65warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"EMPI","offers":[{"title":"M12x1.5, Set of 5 (70-2870-0)","offer_id":66941946396787,"sku":"70-2870-0","price":26.95,"currency_code":"USD","in_stock":true},{"title":"M14x1.5, Set of 4 (70-2872-0)","offer_id":66941946429555,"sku":"70-2872-0","price":26.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/70-2870-0-scaled.jpg?v=1792476392"}],"url":"https:\/\/www.washburnsmetal.com\/collections\/vw-lug-bolts-adapters-spacers.oembed","provider":"Washburn's Metal","version":"1.0","type":"link"}