{"product_id":"pmo-air-cleaner-stud-set-short-8-pcs-porsche-911-pm-o937-0","title":"PMO Air Cleaner Stud Set, Short, 8 pcs | Porsche 911 1965–1989 | Water Shield Air Cleaner (PM-O937-0)","description":"\u003ch2\u003ePMO Air Cleaner Stud Set, Short, 8 pcs | Porsche 911 1965–1989 | Water Shield Air Cleaner (PM-O937-0)\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eShort answer:\u003c\/strong\u003e The PMO PM-O937-0 is a set of 8 short air cleaner studs that hold the PMO Water Shield air cleaner to PMO or Weber three-barrel carburetors on the carbureted air-cooled Porsche 911 (1965–1989). It is the short companion to the tall set PM-O936-0. The single short stud is PMO PM-O144-2. UPC 707924561180.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1965–1989\u003c\/td\u003e\n\u003ctd\u003ePorsche 911 (air-cooled, carbureted)\u003c\/td\u003e\n\u003ctd\u003ePMO or Weber 40\/46\/50mm carburetors with a PMO Water Shield air cleaner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1965–1989\u003c\/td\u003e\n\u003ctd\u003ePorsche 911 with PMO short-height Water Shield kit\u003c\/td\u003e\n\u003ctd\u003ePM-O312-0 (PMO carbs) or PM-O316-0 (Weber carbs) with the 2.25 in PM-O367-2 element. Pairing is based on PMO's short\/tall naming; PMO publishes no stud-to-kit chart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1965–1989\u003c\/td\u003e\n\u003ctd\u003ePorsche 911 with standard-height Water Shield kit\u003c\/td\u003e\n\u003ctd\u003eDoes not fit as intended. Use the tall set PM-O936-0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1969–1989\u003c\/td\u003e\n\u003ctd\u003ePorsche 911 with factory MFI, CIS or Motronic injection\u003c\/td\u003e\n\u003ctd\u003eDoes not fit unless the car has been converted to PMO or Weber carburetors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1975–1989\u003c\/td\u003e\n\u003ctd\u003ePorsche 930 Turbo\u003c\/td\u003e\n\u003ctd\u003eDoes not fit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAll\u003c\/td\u003e\n\u003ctd\u003ePorsche 912 \/ 914 four-cylinder\u003c\/td\u003e\n\u003ctd\u003eDoes not fit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eIf you are not sure which air cleaner height you have, measure the filter element: the short element is 2.25 in tall and the standard element is 3.25 in tall.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003ePMO PM-O937-0 (our SKU)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003ePMO (Performance Machined Originals), distributed by EMPI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRelated numbers\u003c\/td\u003e\n\u003ctd\u003ePM-O144-2 (single short stud), PM-O936-0 (tall 8-piece set)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOE (Porsche) number\u003c\/td\u003e\n\u003ctd\u003eNone. This is a PMO-specific part with no factory equivalent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJP Group reference\u003c\/td\u003e\n\u003ctd\u003eNone (PMO part, not JP Group)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e707924561180\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eAir cleaner studs, short\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold as\u003c\/td\u003e\n\u003ctd\u003eSet of 8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial \/ finish\u003c\/td\u003e\n\u003ctd\u003eNot published\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread \/ length\u003c\/td\u003e\n\u003ctd\u003eNot published (described only as \"short\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of origin\u003c\/td\u003e\n\u003ctd\u003eNot published for this SKU\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping size (estimate)\u003c\/td\u003e\n\u003ctd\u003e5 x 4 x 1 in, about 0.3 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e8 short air cleaner studs, PMO PM-O937-0\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eNot included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAir cleaner base, top or filter element\u003c\/li\u003e\n\u003cli\u003eAir filter gaskets\u003c\/li\u003e\n\u003cli\u003eCarburetors, manifolds or linkage\u003c\/li\u003e\n\u003cli\u003eBreather elbows or the vapor block kit (PM-O301-0)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy it matters\u003c\/h3\u003e\n\u003cp\u003eThe studs are what clamp the Water Shield top and filter element down onto the base. A stud that is too long stops the top from seating or leaves it loose; a stud that is too short will not reach the nut. Both leave a gap where unfiltered air, sand and water can get past the filter and straight into the carburetor throats. Studs also get stripped, bent or lost when the air cleaners come off for carb synchronizing, jetting or valve adjustments. This is the correct-length genuine PMO set for the short-height setup, so you do not have to cut down tall studs or use hardware-store threaded rod.\u003c\/p\u003e\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConfirm your element height before ordering: short (2.25 in, PM-O367-2) or standard (3.25 in, PM-O367-1).\u003c\/li\u003e\n\u003cli\u003eReplace studs one at a time so the base and gaskets stay lined up.\u003c\/li\u003e\n\u003cli\u003eThread studs in by hand first. If one binds, stop and clean the threads instead of forcing it.\u003c\/li\u003e\n\u003cli\u003eTighten snug and even. PMO does not publish a torque value, so do not overtighten into the aluminum base.\u003c\/li\u003e\n\u003cli\u003eAfter installing, check that the top sits evenly on the element all the way around.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the PMO PM-O937-0 stud set fit my Porsche 911?\u003c\/strong\u003e\u003cbr\u003eIt fits the carbureted air-cooled Porsche 911, 1965–1989, running PMO or Weber 40\/46\/50mm three-barrel carburetors with a PMO Water Shield air cleaner. It does not fit fuel-injected (MFI, CIS or Motronic) 911s unless they have been converted to PMO or Weber carburetors, and it does not fit the 930 Turbo or four-cylinder 912\/914 engines.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between PM-O937-0 and PM-O936-0?\u003c\/strong\u003e\u003cbr\u003eStud length. PM-O937-0 is the short air cleaner stud set and PM-O936-0 is the tall set. Both are 8-piece sets for the PMO Water Shield air cleaner. Match the stud to the height of the filter element you run: the short studs go with the short-height setup, the tall studs with the standard-height setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich air cleaner kits use the short studs?\u003c\/strong\u003e\u003cbr\u003ePMO's catalog pairs short and tall studs with its short-height and standard-height Water Shield kits. The short-height kits are PM-O312-0 (PMO carbs) and PM-O316-0 (Weber carbs), which use the 2.25 in tall PM-O367-2 element. PMO does not publish a stud-to-kit chart, so measure your old stud if you are unsure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many studs are in the set, and can I buy just one?\u003c\/strong\u003e\u003cbr\u003eThe set contains 8 short studs. PMO also lists the single short Water Shield air cleaner stud as PM-O144-2 (each) if you only need to replace one; contact us and we will check availability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this a genuine PMO part or an aftermarket copy?\u003c\/strong\u003e\u003cbr\u003eIt is a genuine PMO (Performance Machined Originals) part, supplied through EMPI, PMO's US distributor. It is new, not rebuilt or used.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat else do I need?\u003c\/strong\u003e\u003cbr\u003eNothing else if your Water Shield air cleaner is already assembled. If you are replacing parts at the same time, check the air filter gasket for Weber carbs (PM-O300-5), the short element (PM-O367-2) and the Water Shield top (PM-O367-5).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre thread size and stud length published?\u003c\/strong\u003e\u003cbr\u003eNo. PMO and EMPI only describe these as short versus tall. Thread size and overall length are not published, so compare against your old stud or the filter element height before ordering. We will add measurements to this listing once we have the part in hand.\u003c\/p\u003e\n\u003ch3\u003eExplore related categories\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"\/collections\/pmo\"\u003ePMO Carburetors \u0026amp; Induction\u003c\/a\u003e · \u003ca href=\"\/collections\/pmo-air-induction\"\u003ePMO Air Cleaners \u0026amp; Velocity Stacks\u003c\/a\u003e · \u003ca href=\"\/collections\/fuel-intake\"\u003eFuel \u0026amp; Intake Components\u003c\/a\u003e · \u003ca href=\"\/collections\/porsche-911\"\u003ePorsche 911 \/ 912 Parts\u003c\/a\u003e · \u003ca href=\"\/collections\/all-porsche\"\u003eAll Porsche Parts\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e⚠ California Proposition 65 Warning:\u003c\/strong\u003e This product can expose you to chemicals including lead, known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"PMO","offers":[{"title":"Default Title","offer_id":67100942172275,"sku":"PM-O937-0","price":37.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/2760\/1523\/files\/PM-O937-0-scaled.jpg?v=1793700778","url":"https:\/\/www.washburnsmetal.com\/products\/pmo-air-cleaner-stud-set-short-8-pcs-porsche-911-pm-o937-0","provider":"Washburn's Metal","version":"1.0","type":"link"}