EMPI Super Beetle Front Apron, Non-Vented | VW Super Beetle 1971–1979 | Stamped Steel Weld-In (98-5220-B)
Couldn't load pickup availability
- Vendor EMPI
- SKU 98-5220-B
- Barcode 707924486827
-
Fits
- 1971-1979 VW Super Beetle
Not sure it fits? Call the shop: (657) 438-7002.
EMPI Super Beetle Front Apron, Non-Vented — 1971–1979 (98-5220-B)
Short answer: The EMPI 98-5220-B is a stamped steel, weld-in front apron for the 1971–1979 VW Super Beetle in the non-vented (no louvers) configuration. It replaces VW reference 111805591G, is supplied bare for prep and paint, and is sold each as the full apron panel. Standard Beetle aprons will not fit a Super, and this one will not fit a Standard Beetle.
Part numbers: EMPI 98-5220-B · VW 111 805 591 G / 111805591G / 111-805-591G · UPC 707924486827
Vehicle Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 1971–1979 | VW Super Beetle | Front apron / valance, non-vented |
| 1968–77 | VW Standard Beetle | Does not fit — use 98-8752-B |
| 1967 and earlier | VW Standard Beetle | Does not fit — use 98-8751-B |
If you are not certain whether your car is a Standard or a Super, call the shop at (657) 438-7002 — we would rather sort it out on the phone than process the return.
Specifications
| Spec | Detail |
|---|---|
| EMPI part # | 98-5220-B |
| Replaces VW | 111805591G |
| Material | Stamped steel |
| Finish | Bare (requires prep and paint) |
| Configuration | Non-vented (no louvers) |
| Type | Weld-in, full apron panel |
| Sold as | Each |
| UPC | 707924486827 |
Why It Matters
The Super Beetle front end is a different shape from the Standard car — the MacPherson strut front suspension changed the geometry of the whole nose. Aprons rot for the same reason on every Beetle: they take the full spray off the front tires, they are double-skinned at the bottom edge, and mud packs in behind the spare wheel well and stays wet. Because the apron carries the bumper mounts and sets the hood and fender gaps, a rotten one is an alignment problem, not just a cosmetic one.
Installation Notes
- Weld-in. Drill the factory spot welds, cut the old apron free, dress the flanges flat.
- Dry-fit against both fenders and the hood before final welds — the apron sets your front-end gaps.
- Seam-seal and coat the back side and the inside of the lower edge before paint.
Shipping
A front apron is a large, light panel and carriers rate it on dimensional weight. Expect an oversize handling charge. Contact us at (657) 438-7002 if you want a shipping figure before ordering.
Frequently Asked Questions
Will a Standard Beetle front apron fit my Super Beetle?
No. The Super Beetle nose is a different shape because of the strut front suspension.
What does non-vented mean on a Super Beetle front apron?
Some aprons carry louvers. This one is the plain version without them.
Does the EMPI Super Beetle front apron come painted?
No. It is bare and needs prep and paint.
Is 98-5220-B the full apron or a repair section?
The full apron panel.
What VW part number does the 98-5220-B Super Beetle apron replace?
It replaces VW reference 111805591G.
California Proposition 65 WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Explore Related Categories
The Tech Bench Everything we know about doing the work, in one place — written and filmed on our own bench in Orange, California, with the same parts we sell you.
Pick a bench below. Written install guides, free decoder tools, install videos, and the fitment lookup — each one lives on its own page so you're not scrolling past nine systems to find the one you're working on.
Four benches
Pick the one that matches the job in front of youInstall Guides
The full written library — procedures, torque specs, and the order of operations that keeps you from taking something apart twice. Organised by system.
55 guides8 systems5 published Open the library 02Decoders & Lookup
Chassis number, Beetle M-code, Bus M-code. Free tools for pinning down exactly what you have before you spend money on a part that doesn't fit it.
Chassis No.M-PlateFree Open the decoders 03Watch & Learn
Install videos and build footage from the shop floor. Watch the part go in — then grab the kit from the same page.
InstallsBuildsYouTube Watch the videos 04Fitment Lookup
Year and model in, the parts that actually fit out. The fastest way from "I think it's a '67" to the right part number in your cart.
Year / ModelAll parts Open the lookupLatest from the bench
5Most recently publishedGear Ratio Calculator
Type 1 and Bus transaxles. Ring and pinion, gear ratios, tire height and shift rpm in — road speed, rpm drop on every shift, and cruise rpm out.
Type 1 · BusOpen the calculator CH01 Guide 01 Best sellerSnap-Lock Delrin Shift Bushing
The 20-minute fix that turns a sloppy shifter crisp — and the whole shift-linkage explained.
#CH01Read the guide BY01 Guide 27Big Washburn Windows
Large engine-bay access panels for dual-carb and big-engine builds — reach the carbs without pulling the motor.
#BY01Read the guide PMO ReferencePMO Carburetors: Triple-Throat Induction
The complete reference on PMO triple-throat carburetors for air-cooled Porsche — sizing, jetting, and setup.
PMORead the guide CH64 ChassisFlat Out Custom Shortened Pan Halves
Building a shortened dune buggy or kit car? Engineered pan halves put a straight floor under it without sectioning a stock VW pan.
#CH64Read the guideFrom the shop blog
3Shorter reads from the shop floorBig Washburn Carb Windows: What They Are and Why We Cut Them
The reasoning behind cutting the rear inner fenders open, before you read the full install guide.
Read the post BlogTunnel Access Plates: Why We Cut a Hole in Your Pan on Purpose
Why the center tunnel gets an access plate, and what it saves you the next time the linkage needs attention.
Read the post BlogSome Hot VWs That Came Through the Shop This Spring
A look at the cars on the lifts in Orange, California, and the work that went into them.
Read the postCan't find your job here?
Call the shop. If the guide isn't written yet, we'll walk you through it on the phone — fitment, torque, sequence, what to buy and what to skip.
(657) 438-7002Shop line — parts, fitment and technical questions. Orange, California.
Free shipping on domestic (U.S.) orders over $250 — no code needed; oversize and freight items are excluded and ship at carrier rates. Otherwise, domestic shipping is calculated at checkout based on the size, weight, and destination of your order.
Orders are typically processed within 24–48 hours before they ship. Once your order ships, you'll get an email with tracking information.
Shipping outside the U.S.? Contact us at (657) 438-7002 before you order and we'll confirm rates and options for your destination.