JP Group Jack Receiver & Outrigger, Left Front | VW Karmann Ghia Type 14 | Weld-In Steel (JP-8416-0)
Couldn't load pickup availability
- Vendor JP Group
- SKU JP-8416-0
- Barcode 707924527513
-
Fits
- 1956-1974 VW Karmann Ghia Coupe
- 1957-1974 VW Karmann Ghia Convertible
Not sure it fits? Call the shop: (657) 438-7002.
VW Karmann Ghia Jack Receiver & Outrigger, Left Front | 1956-1974 Coupe & 1957-1974 Convertible | Weld-In | JP Group JP-8416-0
JP Group JP-8416-0 is the left front jack receiver and outrigger for the VW Karmann Ghia Type 14, 1956-1974 coupe and 1957-1974 convertible. Both pieces come in one stamped steel, weld-in structural panel, so the geometry between the heater channel and the jack socket comes back correct. It accepts the original-style jack, is supplied bare and sold each.
Part numbers: JP Group JP-8416-0 / JP84160. Related: rear jack receiver support JP-8415-0; complete left heater channel JP-8420-0.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 1956-1974 | VW Karmann Ghia Coupe (Type 14) | Jack Receiver & Outrigger, Left Front |
| 1957-1974 | VW Karmann Ghia Convertible (Type 14) | Jack Receiver & Outrigger, Left Front |
Left front jacking point only. The rear jack receiver support is JP-8415-0.
Specifications
| Spec | Detail |
|---|---|
| Part number | JP-8416-0 |
| Side / position | Left front jacking point |
| Includes | Jack receiver and outrigger section in one panel |
| Socket | Accepts the original-style jack |
| Material | Stamped steel |
| Finish | Bare; ready for prep, primer and paint |
| Installation | Weld-in structural section |
| Sold as | Each |
What's Included
- Left front jack receiver and outrigger, one panel (1)
Why It Matters
The outrigger is the bracket that ties the heater channel out to the jacking point, and it carries the load every time the car goes up. It sits in the dirtiest part of the underside, welded to metal that rots, so it usually fails quietly and is discovered the hard way.
Having the receiver and outrigger in one panel means the relationship between them is right, and the repair restores a load-bearing jacking point that will actually lift the car.
Installation Notes
- Check that the heater channel is solid before welding this in; a new jack point on rotten metal just moves the failure a few inches.
- Support the car on the pan or a lift, never on the point you're replacing.
- Seal the seams before the underside goes back together.
- Usually replaced during heater channel work; see JP-8420-0 (complete left channel).
Frequently Asked Questions
Which position is the JP Group JP-8416-0?
Left front. The rear jack receiver support is JP-8415-0.
Is the outrigger included with the Ghia jack receiver?
Yes. The receiver and outrigger come together in one panel.
Do I need a Karmann Ghia heater channel as well?
Often. The outrigger rots because the channel it mounts to did; the complete left channel is JP-8420-0.
Is the JP-8416-0 painted?
No. It is bare steel, ready for prep, primer and paint.
Will the original Karmann Ghia jack fit the new receiver?
Yes. The socket accepts the original-style jack.
What years of Karmann Ghia does the JP-8416-0 fit?
It fits the VW Karmann Ghia Type 14 coupe 1956-1974 and convertible 1957-1974.
Explore Related Categories
Browse Chassis and Body Panels.
⚠ WARNING (California Prop 65): This product can expose you to chemicals known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.
The Tech Bench Everything we know about doing the work, in one place — written and filmed on our own bench in Orange, California, with the same parts we sell you.
Pick a bench below. Written install guides, free decoder tools, install videos, and the fitment lookup — each one lives on its own page so you're not scrolling past nine systems to find the one you're working on.
Four benches
Pick the one that matches the job in front of youInstall Guides
The full written library — procedures, torque specs, and the order of operations that keeps you from taking something apart twice. Organised by system.
55 guides8 systems5 published Open the library 02Decoders & Lookup
Chassis number, Beetle M-code, Bus M-code. Free tools for pinning down exactly what you have before you spend money on a part that doesn't fit it.
Chassis No.M-PlateFree Open the decoders 03Watch & Learn
Install videos and build footage from the shop floor. Watch the part go in — then grab the kit from the same page.
InstallsBuildsYouTube Watch the videos 04Fitment Lookup
Year and model in, the parts that actually fit out. The fastest way from "I think it's a '67" to the right part number in your cart.
Year / ModelAll parts Open the lookupLatest from the bench
5Most recently publishedGear Ratio Calculator
Type 1 and Bus transaxles. Ring and pinion, gear ratios, tire height and shift rpm in — road speed, rpm drop on every shift, and cruise rpm out.
Type 1 · BusOpen the calculator CH01 Guide 01 Best sellerSnap-Lock Delrin Shift Bushing
The 20-minute fix that turns a sloppy shifter crisp — and the whole shift-linkage explained.
#CH01Read the guide BY01 Guide 27Big Washburn Windows
Large engine-bay access panels for dual-carb and big-engine builds — reach the carbs without pulling the motor.
#BY01Read the guide PMO ReferencePMO Carburetors: Triple-Throat Induction
The complete reference on PMO triple-throat carburetors for air-cooled Porsche — sizing, jetting, and setup.
PMORead the guide CH64 ChassisFlat Out Custom Shortened Pan Halves
Building a shortened dune buggy or kit car? Engineered pan halves put a straight floor under it without sectioning a stock VW pan.
#CH64Read the guideFrom the shop blog
3Shorter reads from the shop floorBig Washburn Carb Windows: What They Are and Why We Cut Them
The reasoning behind cutting the rear inner fenders open, before you read the full install guide.
Read the post BlogTunnel Access Plates: Why We Cut a Hole in Your Pan on Purpose
Why the center tunnel gets an access plate, and what it saves you the next time the linkage needs attention.
Read the post BlogSome Hot VWs That Came Through the Shop This Spring
A look at the cars on the lifts in Orange, California, and the work that went into them.
Read the postCan't find your job here?
Call the shop. If the guide isn't written yet, we'll walk you through it on the phone — fitment, torque, sequence, what to buy and what to skip.
(657) 438-7002Shop line — parts, fitment and technical questions. Orange, California.
Free shipping on domestic (U.S.) orders over $250 — no code needed; oversize and freight items are excluded and ship at carrier rates. Otherwise, domestic shipping is calculated at checkout based on the size, weight, and destination of your order.
Orders are typically processed within 24–48 hours before they ship. Once your order ships, you'll get an email with tracking information.
Shipping outside the U.S.? Contact us at (657) 438-7002 before you order and we'll confirm rates and options for your destination.