Front Fender Corner Structure, Left Cowl-Side Inner — Porsche 911 / 912 (JP-2529-0)
Couldn't load pickup availability
The JP-2529-0 is the small boxed corner section where the rear upper edge of the left front fender meets the cowl and A-pillar, for 1965–1989 Porsche 911 and 912. It is a JP Group (Dansk) weld-in steel reproduction, stamped in Denmark to the factory profile.
What is the JP-2529-0?
It is the small boxed corner section where the rear upper edge of the left front fender meets the cowl and A-pillar. JP Group of Denmark stamps it in steel to the original factory profile, and it is sold in the US under the Dansk name. US shops also list this part as a fender corner structure, cowl corner, inner wing corner — all the same panel.
Does the JP-2529-0 fit my Porsche?
| Years | Models |
|---|---|
| 1965–1989 | Porsche 911 F-model and G-model incl. 930 Turbo; 1965–1969 Porsche 912 and 1976 912E |
Pairs with JP-2530-0 (right-hand) on the opposite side.
Why this panel fails
Water runs off the windscreen into this corner and sits there. It is one of the first places a 911 front end rusts and one of the most awkward to fabricate by hand.
What this is not
This is not the full fender — this is a repair section.
Part numbers and cross-references
- Our part number: JP-2529-0
- Porsche / OE interchange: JP Group 1680301470
- Brand: JP Group (sold as Dansk in the United States)
- Country of origin: Denmark
- Material and finish: stamped steel, supplied ready for weld-in fitment, seam sealer, epoxy primer and paint
- Shipping weight: 1 lb
How is it installed?
This is a weld-in restoration panel. It is cut in and welded by a qualified body shop or an experienced fabricator using standard MIG or spot-welding technique. Trial-fit and clamp before you cut the original out — on a rusty car the surrounding structure has usually moved, and the new panel is your reference for putting it back where the factory had it.
Common questions
Is the JP-2529-0 genuine Porsche or a reproduction?
It is an aftermarket reproduction made by JP Group of Denmark, built to match the factory panel's fit and profile. It is not a genuine Porsche OEM part, and it is priced accordingly.
Does it come primed or painted?
It ships bare or lightly protected depending on the batch, ready for you to prep, seam seal and paint. Plan on your own primer and paint.
Do I need one or two?
This part is handed. You need one per side, and JP-2530-0 (right-hand) covers the other side.
How do I know it is the right panel for my chassis?
Send us your VIN or model year before you order. We would rather answer a question than process a return on a panel that has already been cut.
⚠ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.