IRS Stub Axle Bearing Retainer Cap, Restoration Line — Refurbished German | VW Beetle 1969–1979, Ghia, Type 3 & Thing (#R40)
Couldn't load pickup availability
- Vendor Washburn's Metal
- SKU #R40
-
Fits
- 1969-1979|VW|Beetle
- 1969-1974|VW|Karmann Ghia
- 1969-1973|VW|Type 3
- 1973-1974|VW|Thing
Not sure it fits? Call the shop: (657) 438-7002.
VW IRS Stub Axle Bearing Retainer Cap | Refurbished Original German (1969+)
Short answer: This is a refurbished original German IRS stub axle bearing retainer cap (#R40), sold individually with two needed per car. It fits 1969–1979 VW Beetle, 1969–1974 Karmann Ghia, 1969–1973 Type 3 and 1973–1974 Thing with IRS.
An original German IRS stub axle bearing retainer cap, media blasted and powder coated. Two are required per car; sold individually.
Vehicle Fitment
- VW Beetle (IRS): 1969–1979
- VW Karmann Ghia (IRS): 1969–1974
- VW Type 3 (IRS): 1969–1973
- VW Thing: 1973–1974
Why Choose Washburn's Metal?
We take original German caps, media blast and powder coat them for a clean, corrosion-resistant finish ready to reinstall.
Key Features & Benefits
- Original German: Genuine factory part.
- Media Blasted & Powder Coated: Clean, durable finish.
- Sold Individually: Two required per car.
Technical Specifications
- Origin: Original German
- Condition: Refurbished (media blasted, powder coated)
- Sold As: Individual (two required per car)
- Fits: 1969 & later IRS
- Part Number: #R40
- Boxed Dimensions: 6 x 6 x 2 in (approx.)
Frequently Asked Questions
- How many do I need? Two are required per car; they are sold individually.
- Which cars use this? 1969–1979 Beetle, 1969–1974 Ghia, 1969–1973 Type 3 and 1973–1974 Thing with IRS.
- What is the part number? Washburn's Metal #R40.
Explore Related Categories
More rear-end restoration parts: Suspension, Axles, and All VW Air-Cooled.
Prop 65 Warning
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
The Tech Bench Everything we know about doing the work, in one place — written and filmed on our own bench in Orange, California, with the same parts we sell you.
Pick a bench below. Written install guides, free decoder tools, install videos, and the fitment lookup — each one lives on its own page so you're not scrolling past nine systems to find the one you're working on.
Four benches
Pick the one that matches the job in front of youInstall Guides
The full written library — procedures, torque specs, and the order of operations that keeps you from taking something apart twice. Organised by system.
55 guides8 systems5 published Open the library 02Decoders & Lookup
Chassis number, Beetle M-code, Bus M-code. Free tools for pinning down exactly what you have before you spend money on a part that doesn't fit it.
Chassis No.M-PlateFree Open the decoders 03Watch & Learn
Install videos and build footage from the shop floor. Watch the part go in — then grab the kit from the same page.
InstallsBuildsYouTube Watch the videos 04Fitment Lookup
Year and model in, the parts that actually fit out. The fastest way from "I think it's a '67" to the right part number in your cart.
Year / ModelAll parts Open the lookupLatest from the bench
5Most recently publishedGear Ratio Calculator
Type 1 and Bus transaxles. Ring and pinion, gear ratios, tire height and shift rpm in — road speed, rpm drop on every shift, and cruise rpm out.
Type 1 · BusOpen the calculator CH01 Guide 01 Best sellerSnap-Lock Delrin Shift Bushing
The 20-minute fix that turns a sloppy shifter crisp — and the whole shift-linkage explained.
#CH01Read the guide BY01 Guide 27Big Washburn Windows
Large engine-bay access panels for dual-carb and big-engine builds — reach the carbs without pulling the motor.
#BY01Read the guide PMO ReferencePMO Carburetors: Triple-Throat Induction
The complete reference on PMO triple-throat carburetors for air-cooled Porsche — sizing, jetting, and setup.
PMORead the guide CH64 ChassisFlat Out Custom Shortened Pan Halves
Building a shortened dune buggy or kit car? Engineered pan halves put a straight floor under it without sectioning a stock VW pan.
#CH64Read the guideFrom the shop blog
3Shorter reads from the shop floorBig Washburn Carb Windows: What They Are and Why We Cut Them
The reasoning behind cutting the rear inner fenders open, before you read the full install guide.
Read the post BlogTunnel Access Plates: Why We Cut a Hole in Your Pan on Purpose
Why the center tunnel gets an access plate, and what it saves you the next time the linkage needs attention.
Read the post BlogSome Hot VWs That Came Through the Shop This Spring
A look at the cars on the lifts in Orange, California, and the work that went into them.
Read the postCan't find your job here?
Call the shop. If the guide isn't written yet, we'll walk you through it on the phone — fitment, torque, sequence, what to buy and what to skip.
(657) 438-7002Shop line — parts, fitment and technical questions. Orange, California.
Free shipping on domestic (U.S.) orders over $250 — no code needed; oversize and freight items are excluded and ship at carrier rates. Otherwise, domestic shipping is calculated at checkout based on the size, weight, and destination of your order.
Orders are typically processed within 24–48 hours before they ship. Once your order ships, you'll get an email with tracking information.
Shipping outside the U.S.? Contact us at (657) 438-7002 before you order and we'll confirm rates and options for your destination.