JP Group Porsche 911 Rear Quarter Repair Panel, Right — 1st Press Steel | 911 Coupe 1969–1973 (JP-1841-0)
Couldn't load pickup availability
JP Group Right Rear Quarter Repair Panel, 1st Press — Porsche 911 Coupe 1969–1973 (JP-1841-0)
Short answer: This is JP Group's 1st press steel weld-in repair section for the right rear quarter of a 1969–1973 Porsche 911 Coupe, JP-1841-0. It does not include the door jamb or tail light holder and is not listed for the Targa or 1974 and later cars.
A steel weld-in repair section for the right rear quarter panel of a 1969–1973 Porsche 911 Coupe, made by JP Group (Dansk). It does not include the door jamb or the tail light holder. That lets you replace rusted or damaged quarter metal without buying a full panel.
Sold individually, right side only.
Fitment
| Model | Years | Notes |
|---|---|---|
| Porsche 911 Coupe | 1969–1973 | Right rear (passenger side on LHD cars). 2.0L, 2.2L and 2.4L cars, per the supplier catalogue. |
| Not listed | — | 911 Targa; 1965–1968 911; 1974 and later 911; 912. Send us your chassis number if unsure. |
Specifications
| Spec | Value |
|---|---|
| Manufacturer | JP Group (Dansk) |
| Part number | JP-1841-0 |
| JP Group reference | 1680401080 |
| Position | Right rear |
| Version | 1st press |
| Coverage | Quarter repair section, without door jamb and tail light holder |
| Material | Steel |
| Installation | Weld-in |
| Sold as | Each |
| UPC | 707924521344 |
What's Included and What You Also Need
- Included: one right rear quarter repair panel.
- Not included: door jamb and tail light holder sections, fasteners, seam sealer, primer.
- Other side: the left rear repair panel is JP-1840-0.
- Damage past the repair area? See the fuller right rear quarter panel (JP-1837-0), and check its fitment against your car.
Installation Notes
- Weld-in panel. Fitting it is body-shop work: cut out the damaged area, trial-fit, weld, then seam-seal and refinish.
- Check the panel against your car and measure the body before you cut.
- The door jamb and tail light holder are not part of this section, so plan cut lines around them.
Cross-Reference Numbers (for reference)
- JP Group: JP-1841-0 / 1680401080
- Supplier-listed reference: 591050HF
Explore Related Categories
Body Panels, Porsche 911, All Porsche
Frequently Asked Questions
Which 911s does this fit?
The supplier catalogue lists it for the 1969–1973 Porsche 911 Coupe, right rear, with 2.0L, 2.2L and 2.4L engines. It is not listed for the Targa or for 1974 and later cars.
Which side is this?
Right rear, the passenger side on a left-hand-drive car. It is handed. The left side is JP-1840-0.
Is this a full quarter panel?
No. It is a repair section for the quarter panel, without the door jamb and without the tail light holder. If your damage extends into those areas you will need to repair them separately or use a fuller panel.
What does '1st press' mean here?
It identifies this version of the panel in the supplier catalogue, which describes it as 'repair panel for quarter panel without door jamb and tail light holder, 1st press, right'.
Is welding required?
Yes. It is a steel weld-in panel and should be fitted by a qualified body shop or experienced fabricator.
Where should I cut the old quarter?
That depends on how far the rust or damage goes. Trial-fit the new section, mark your cut lines on sound metal, and keep the door jamb and tail light area in mind because this section does not include them. Measure the body before cutting.
What numbers does it cross-reference?
JP Group 1680401080 and supplier reference 591050HF. Numbers are for reference only.
Porsche® and model designations are trademarks of Dr. Ing. h.c. F. Porsche AG. Washburn's Metal is not affiliated with or endorsed by Porsche. Part numbers are for reference only.
Parts are legal for use on pre-pollution-controlled vehicles only.
Prop 65 Warning
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
