EMPI GTV-2 D7000 CNC Ported Heads | VW Type 1 94mm | 44/37.5mm SS Valves, Pair (98-1561-B)
Couldn't load pickup availability
EMPI GTV-2 D7000 CNC Ported Heads — 94mm, 44/37.5mm SS Valves, Pair (98-1561-B)
The EMPI 98-1561-B is a matched pair of GTV-2 dual-port cylinder heads with the D7000 CNC port, machined for 94mm bore air-cooled VW Type 1 big-bore engines (1914cc, 2110cc, 2276cc, 2332cc) running high-lift cams. They carry 44mm intake / 37.5mm exhaust stainless Manley valves on dual hi-rev springs, with studs and a custom intake gasket included.
Part numbers: EMPI 98-1561-B (also written 981561B) · UPC 707924472288 · Required lash caps: EMPI 00-4006-0
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 1971-1979 | VW Beetle | Dual-port Type 1 engine, 94mm bore |
| 1971 | VW Type 2 Bus | Dual-port Type 1 engine; Bus with the Type 4 engine is not confirmed |
| 1971-1974 | VW Karmann Ghia | Dual-port |
| 1971-1973 | VW Type 3 | Dual-port |
| 1973 and 1974 | VW Thing | Dual-port |
| — | Stock 85.5mm or 90.5/92mm bore | Not confirmed |
| — | Single-port engines | Not confirmed |
| — | Type 4 engines | Not confirmed |
Specifications
| Spec | Detail |
|---|---|
| Bore | 94mm, GTV-2 dual port casting |
| Port | D7000 CNC, cut on a 5-axis CNC mill |
| Valves | 44mm intake / 37.5mm exhaust, stainless Manley |
| Springs | Dual hi-rev, chromoly retainers, hardened keepers |
| Guides | Bronze |
| Valve job | Competition 3-angle |
| Spark plugs | 12mm 3/4" reach |
| Part number | 98-1561-B |
| UPC | 707924472288 |
| Sold as | Matched pair |
What's Included
- Two heads with valves, dual springs, chromoly retainers, hardened keepers and bronze guides
- Rocker, exhaust and intake studs
- Custom intake gasket
Not Included
- Lash caps (P/N 00-4006-0), required with stainless valves
Why It Matters
The D7000 port profile delivers serious racing-grade airflow, slotting between Stage 1 and the maximum Stage 3 wedge, which makes it a strong fit for 1914–2332cc builds that need real flow short of the full Stage 3. It is cut on a 5-axis CNC mill for repeatable flow.
Installation Notes
- Lash caps (P/N 00-4006-0) are required for all stainless steel valve applications — sold separately.
- 12mm long-reach spark plugs must be used in place of stock Bosch plugs.
- Verify rocker arm geometry and check for coil bind with dual springs.
Frequently Asked Questions
What VW engines do the EMPI 98-1561-B heads fit?
Dual-port VW Type 1 builds with 94mm bore (1914cc, 2110cc, 2276cc, 2332cc) in the 1971-1979 Beetle, 1971-1974 Karmann Ghia, 1971-1973 Type 3, Thing and the 1971 Bus. Type 4 engines are not confirmed.
What bore are these for?
94mm pistons (1914-2332cc).
How does D7000 compare to Stage 3?
D7000 is serious flow with 44/37.5 valves; Stage 3 is the maximum wedge port flowing up to 210 CFM.
Do I need lash caps?
Yes — required with stainless valves, sold separately (00-4006-0).
Sold each or as a pair?
Matched pair.
What's the part number?
EMPI 98-1561-B (UPC 707924472288).
Explore Related Categories
Engine Parts · All VW Air-Cooled · VW Beetle
Prop 65 Warning
WARNING: This product can expose you to chemicals including lead which are known to the State of California to cause cancer and reproductive harm. For more information, go to www.P65Warnings.ca.gov. All parts legal for use on pre-pollution controlled vehicles only.
