Washburn's Metal Stainless -6 AN (3/8") Fuel Line Kit | Volkswagen Chassis

Short answer: The #E02 kit is 10 feet of 304 stainless -6 AN (3/8") fuel line with bulkhead and weld fittings to plumb one air-cooled VW chassis: Beetle, Bus, Karmann Ghia, Thing or Type 3. Order two kits for a fuel-injection feed and return.

This kit is for the professional-level installer. It contains 10 feet of 304 stainless -6 AN fuel line (3/8") to plumb one Volkswagen chassis — a great all-around size whether you're running a naturally-aspirated, dual-carb motor or fuel injection.

The rear frame horn bungs are machined to accept the line so it may be welded together prior to welding the bung to the rear frame horn. The front bulkhead fittings use a 90-degree fitting to exit the top or side of the bulkhead, so tight radiuses don't have to be bent into the tube.

Vehicle Fitment

• VW Beetle: 1949–1979
• VW Bus: 1950–1979
• VW Karmann Ghia: 1956–1974
• VW Thing: 1973–1974
• VW Type 3: 1962–1973

Why Choose Washburn's Metal?

Machined frame-horn bungs and pre-configured 90-degree bulkhead fittings let you plumb a clean, professional fuel system without fighting tight tube bends — designed for serious builds running dual carbs or fuel injection.

Key Features & Benefits

• 304 stainless line: 10 feet of -6 AN (3/8") fuel line to plumb one chassis.
• Versatile sizing: A great all-around size for naturally-aspirated dual-carb motors or fuel injection.
• Machined frame-horn bungs: Designed to accept the line for welding together before welding the bung to the rear frame horn.
• 90-degree bulkhead fittings: Exit the top or side of the bulkhead without bending tight radiuses into the tube.
• Feed/return ready: For a feed/return fuel-injection setup, simply order two kits.

Kit Contents (Single Line Kit)

• 10 feet of -6 AN stainless fuel line
• 1 x -6 AN 90-degree bulkhead fitting
• 1 x -6 AN bulkhead nut
• 2 x aluminum crush washers
• 1 x stainless steel weld fitting
• 1 x -6 AN tube nut & sleeve

Technical Specifications

• Line: 304 stainless, -6 AN (3/8"), 10 feet
• Coverage: Plumbs one Volkswagen chassis (single line)
• Best for: Naturally-aspirated dual-carb or fuel-injection builds
• Skill level: Professional-level installer
• Part Number: #E02
• Manufacturer: Washburn's Metal (Orange, CA)

Frequently Asked Questions

• How much line comes in a kit? 10 feet of -6 AN stainless line — enough to plumb one Volkswagen chassis.
• How do I run a feed/return setup for fuel injection? Simply order two kits — one for the feed line and one for the return.
• Is this a beginner-friendly install? No — this kit is intended for the professional-level installer and involves welding the frame-horn bungs.
• Does this fit a 1967 VW Beetle? Yes. One kit plumbs one 1949–1979 Beetle chassis.
• What is the part number? Washburn's Metal #E02 (-6 AN). The -8 AN 10 ft kit is #E03.

Explore Related Categories

Plumb your build: browse Fuel & Intake, Air-Cooled VW parts, and our Washburn's Signature Series.

Prop 65 Warning

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.