VW Beetle Window Felt Channel Set — Top/Rear Door Glass, 72", Pair | VW Bug & Super Beetle Sedan 1965–1977 | EMPI (00-9771-B)
Couldn't load pickup availability
- Vendor EMPI
- SKU 00-9771-B
- Barcode 707924342697
-
Fits
- 1965-1977 VW Beetle
- 1971-1977 VW Super Beetle
Not sure it fits? Call the shop: (657) 438-7002.
EMPI Felt Window Channel Set — Top/Rear, 72 Inch, Pair (00-9771-B)
Short answer: EMPI 00-9771-B is a boxed pair of 72 in felt-lined U-channels for the top and rear of the door glass on VW Beetle sedans from the 1965 model year and Super Beetle sedans 1971–1977, one piece per door, cut to fit. New felt stops window rattle and binding and protects the glass. Reference 111 837 439D. Made in Brazil.
Part numbers: EMPI 00-9771-B (also 9771-B, 00-9771). Reference 111 837 439D / 111837439D / 111-837-439D (dealer-listed); 8186003000 (EMPI price file). Single 72 in piece: 00-9771-6.
Vehicle Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 1965–1977 | VW Beetle sedan | Type 1 08/64 on (EMPI data for single 00-9771-6); described as Top/Rear Channel, All Sedans |
| 1971–1977 | VW Super Beetle sedan | Dealer-listed (Appletree, JBugs) |
| Not confirmed | Bus 1968–1979, Type 3 1961–1973 | EMPI lists them for the single 00-9771-6 only |
| Not confirmed | 1958–1964 Beetle, convertibles, Karmann Ghia | Check your old channel first |
Specifications
| Specification | Detail |
|---|---|
| Part number | EMPI 00-9771-B |
| Quantity | Pair (2 pieces) |
| Length | 72 in each, cut to fit |
| Type | Felt-lined U-channel (glass run), top and rear of door glass |
| Reference | 111 837 439D (dealer-listed); 8186003000 (EMPI price file) |
| Country of origin | Brazil |
| Shipping weight | 2.63 lb |
| Package dimensions | 44.875 x 16.5 x 3.125 in |
What's Included
Included:
- 2 felt window channels, 72 in each (one per door)
Why It Matters
If a Beetle window squeaks, rattles or chatters in its frame, or the glass shows fine scratches, the felt channel is worn down to its steel backbone. Fresh felt instead of bare steel lets the window roll up without binding and stops scratching the glass.
Installation Notes
- Drop the glass and pull the old channel out of the frame. Clean out the rust and old glue.
- Dry-fit the new channel and mark it, then cut it to length with sharp snips or a fine hacksaw. Leave it a hair long, since you can always take more off.
- Press it into the frame, tapping it home with a rubber mallet, and use a dab of weatherstrip adhesive where the old channel was glued.
- Roll the glass up slowly the first few times so the felt beds in.
Frequently Asked Questions
- Does the EMPI 00-9771-B felt channel fit a 1968 VW Beetle sedan? Yes. EMPI lists the 72 in felt channel for Type 1 from the 1965 model year on, and describes this pair as the top/rear channel for all sedans.
- Is the felt window channel for the door glass? Yes. It is the felt-lined U-channel that runs across the top and down the back of the door window glass, where the glass rides when you roll it up.
- What is the VW part number for Beetle door window felt channel? Reference 111 837 439D (dealer-listed) and 8186003000 (EMPI price file). The EMPI boxed pair is 00-9771-B; a single 72 in piece is 00-9771-6.
- Why is the window channel 72 inches long? It comes long so you can cut it to the exact top and rear run of your door frame. That also suits 1-piece (no vent wing) window conversions.
- Does it fit a convertible or a Bus? This pair is sold for sedans. EMPI lists the single-piece 72 in channel for Bus and Type 3 too, but that is not confirmed for this pair, so check your old channel first.
- How does it ship? In a long box, 44.9 x 16.5 x 3.1 in, 2.63 lb. It is not hazmat and has no ground-only restriction, but the box length can raise the shipping rate.
Explore Related Categories
Doing the doors? Browse VW Beetle Parts, VW Super Beetle Parts, the full EMPI Parts catalog and All Air-Cooled VW.
Prop 65 Warning
⚠ WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov. All parts legal for use on pre-pollution controlled vehicles only.
The Tech Bench Everything we know about doing the work, in one place — written and filmed on our own bench in Orange, California, with the same parts we sell you.
Pick a bench below. Written install guides, free decoder tools, install videos, and the fitment lookup — each one lives on its own page so you're not scrolling past nine systems to find the one you're working on.
Four benches
Pick the one that matches the job in front of youInstall Guides
The full written library — procedures, torque specs, and the order of operations that keeps you from taking something apart twice. Organised by system.
55 guides8 systems5 published Open the library 02Decoders & Lookup
Chassis number, Beetle M-code, Bus M-code. Free tools for pinning down exactly what you have before you spend money on a part that doesn't fit it.
Chassis No.M-PlateFree Open the decoders 03Watch & Learn
Install videos and build footage from the shop floor. Watch the part go in — then grab the kit from the same page.
InstallsBuildsYouTube Watch the videos 04Fitment Lookup
Year and model in, the parts that actually fit out. The fastest way from "I think it's a '67" to the right part number in your cart.
Year / ModelAll parts Open the lookupLatest from the bench
5Most recently publishedGear Ratio Calculator
Type 1 and Bus transaxles. Ring and pinion, gear ratios, tire height and shift rpm in — road speed, rpm drop on every shift, and cruise rpm out.
Type 1 · BusOpen the calculator CH01 Guide 01 Best sellerSnap-Lock Delrin Shift Bushing
The 20-minute fix that turns a sloppy shifter crisp — and the whole shift-linkage explained.
#CH01Read the guide BY01 Guide 27Big Washburn Windows
Large engine-bay access panels for dual-carb and big-engine builds — reach the carbs without pulling the motor.
#BY01Read the guide PMO ReferencePMO Carburetors: Triple-Throat Induction
The complete reference on PMO triple-throat carburetors for air-cooled Porsche — sizing, jetting, and setup.
PMORead the guide CH64 ChassisFlat Out Custom Shortened Pan Halves
Building a shortened dune buggy or kit car? Engineered pan halves put a straight floor under it without sectioning a stock VW pan.
#CH64Read the guideFrom the shop blog
3Shorter reads from the shop floorBig Washburn Carb Windows: What They Are and Why We Cut Them
The reasoning behind cutting the rear inner fenders open, before you read the full install guide.
Read the post BlogTunnel Access Plates: Why We Cut a Hole in Your Pan on Purpose
Why the center tunnel gets an access plate, and what it saves you the next time the linkage needs attention.
Read the post BlogSome Hot VWs That Came Through the Shop This Spring
A look at the cars on the lifts in Orange, California, and the work that went into them.
Read the postCan't find your job here?
Call the shop. If the guide isn't written yet, we'll walk you through it on the phone — fitment, torque, sequence, what to buy and what to skip.
(657) 438-7002Shop line — parts, fitment and technical questions. Orange, California.
Free shipping on domestic (U.S.) orders over $250 — no code needed; oversize and freight items are excluded and ship at carrier rates. Otherwise, domestic shipping is calculated at checkout based on the size, weight, and destination of your order.
Orders are typically processed within 24–48 hours before they ship. Once your order ships, you'll get an email with tracking information.
Shipping outside the U.S.? Contact us at (657) 438-7002 before you order and we'll confirm rates and options for your destination.