EMPI Heater Cable | VW Beetle 1965–1972 & Super Beetle 1971–1972 | Stock Replacement (98-7058-B)

In stock
Usually ships within 24 hours
Regular price $7.95
Product details
  • Vendor EMPI
  • SKU 98-7058-B
  • Barcode 707924375244
  • Fits
    • 1965-1972|VW|Beetle
    • 1971-1972|VW|Super Beetle
    • 1965-1972|VW|Karmann Ghia

Not sure it fits? Call the shop: (657) 438-7002.

Ask an expert

EMPI Heater Cable — VW Beetle 1965–1972, Super Beetle 1971–1972

Stock replacement heater cable for 1965–72 Beetles and Karmann Ghias and 1971–72 Super Beetles. VW reference 111-711-717A.

The heater cables run the full length of the tunnel from the levers to the heat exchanger flaps. They are steel, they live in a damp tunnel, and after decades they seize or snap — usually with the flaps stuck shut, which is why so many old Beetles are reputed to have no heat. Nine times out of ten the heat exchangers are fine and the cables are the problem.

Replace both sides while the tunnel is open. Doing one and leaving the other means doing the job twice.

Vehicle Fitment

  • VW Beetle: 1965–1972
  • VW Super Beetle: 1971–1972
  • VW Karmann Ghia: 1965–1972

Earlier cars use a different length: 1956 to mid-1963 takes 98-7031-B. Call the shop at (657) 438-7002 with your chassis number if your car sits near a split year.

Key Features & Benefits

  • Correct length for the later tunnel: No splicing or improvising.
  • The actual cause of "no heat": Cheaper than chasing heat exchangers.
  • Ships as a normal parcel.

Technical Specifications

  • Part #: 98-7058-B
  • VW / OEM reference: 111-711-717A
  • Sold as: Each — one cable

Frequently Asked Questions

  • Is this one cable or a pair? One. A car needs two — order accordingly.
  • My heat does not work. Is this the problem? Very often. Check whether the flaps at the heat exchangers actually move when you work the levers; if they do not, it is the cables.
  • Will it fit my 1958? No — that takes 98-7031-B.

Installation Tips

  • Heater cables run through their own tubes in the tunnel; feed the new cable from the heater lever end and lube it lightly.
  • Connect each cable to its heat exchanger flap lever at the rear, then work the heater lever and confirm both flaps open and close fully.
  • Doing your throttle and clutch cables too? See our Beetle Cable Refresh Bundle and the King stainless clutch cable.

Explore Related Categories

VW Beetle, VW Super Beetle, All VW Air-Cooled