JP Group Accelerator Cable, 3650 mm | VW Bus 1973–1979 1.7, 1.8 & 2.0 Type 4 Engine | OE 211 721 555 M (JP-8336-0)

In stock
Usually ships in 1–2 business days
Regular price $11.95
Product details
  • Vendor JP Group
  • SKU JP-8336-0
  • Barcode 707924526714
  • Fits
    • 1973-1979 VW Bus

Not sure it fits? Call the shop: (657) 438-7002.

Ask an expert

JP Group Accelerator Cable, 3650 mm | VW Bus 1973–1979 1.7, 1.8 & 2.0 Type 4 Engine | OE 211 721 555 M (JP-8336-0)

Short answer: The JP Group JP-8336-0 is the 3650 mm accelerator (throttle) cable for the 1973–1979 VW Bay Window Bus with the 1.7, 1.8 or 2.0 liter Type 4 engine. It runs from the pedal through the guide tube to the engine. It replaces VW OE 211 721 555 M (JP Group ref. 8170100700). Sold each.

Fitment

Years Vehicle Notes
1973–1979 VW Bay Window Bus, 1.7 / 1.8 / 2.0 Type 4 Per EMPI; LHD
1971–1979 VW Bus with 1600 Type 1 engine — does not fit Uses a different length cable
Automatic transmission Not confirmed Check cable length against yours

Specifications

Spec Detail
Part number JP-8336-0
OE reference 211 721 555 M
JP Group reference 8170100700
UPC 707924526714
Length 3650 mm
Engine 1.7, 1.8, 2.0 L Type 4
Sold as Each
Brand JP Group (Denmark), distributed in the US by EMPI
Condition New
Shipping weight approx. 0.6 lb (estimate)
Package size 12 x 10 x 2 in (estimated)

What's Included / Not Included

  • Included: One accelerator cable.
  • Not included: Guide tube, cable bushings, throttle return spring or carburetor/FI linkage hardware.

Why It Matters

A frayed or kinked accelerator cable makes the throttle sticky or jerky, and if it snaps the Bus is stranded at idle. On Type 4 Buses the cable is long and runs the length of the van, so corrosion inside the guide tube is common. A frayed cable can also hang the throttle open, which is a real safety risk. Replacing the cable as preventive maintenance is cheap insurance on a road-trip Bus.

Installation Notes

  • Note how the old cable is attached at the pedal and engine ends before removing it.
  • Feed the new cable through the guide tube from the front; a little light grease on the cable helps.
  • Check the guide tube and bushings for rust and damage while the cable is out.
  • Set the cable so the throttle reaches full open at full pedal and returns fully to idle.
  • Check that the throttle snaps back with the engine running before driving.
  • We do not publish torque values here; use the factory workshop manual for your vehicle.

Frequently Asked Questions

Does the JP-8336-0 fit my 1976 Bus 2.0?
Yes. EMPI lists the 1973–1979 Bus with 1.7, 1.8 and 2.0 L engines.

Does it fit a 1972 Bus with a 1600?
No. 1600 Type 1 Buses use a different cable length.

Is this the same as VW 211 721 555 M?
Yes. JP Group lists 211 721 555 M as the OE reference.

How long is it?
3650 mm.

Does it fit an automatic?
Not confirmed. Measure your old cable and compare.

Does it include the guide tube?
No, this is the cable only.

Is it new?
Yes, it is a new JP Group part.


Explore Related Categories

VW Bus / Type 2 Parts · Fuel & Intake Components

⚠ WARNING (California Proposition 65): This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov. Parts are legal for use on pre-pollution-controlled vehicles only.

From people who bought it

Customer reviews

No reviews on this part yet. Bought one? Tell other owners how it went.