JP Group Accelerator Pedal Repair Kit (Gas Pedal Rebuild Kit) | VW Beetle 1958–1967 & Karmann Ghia 1957–1967 | OE 113 798 073 (JP-8716-0)
Couldn't load pickup availability
JP Group Accelerator Pedal Repair Kit — VW Beetle 1958–1967 & Karmann Ghia (JP-8716-0)
Short answer: JP-8716-0 is the accelerator (gas) pedal repair kit for the early-style floor-hinged throttle pedal on the 1958–1967 VW Beetle and 1957–1967 Karmann Ghia. It renews the worn pedal pivot hardware so the pedal stops wobbling and binding. It replaces VW OE 113 798 073, JP Group ref 8172150110. Sold as a kit.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 1958–1967 | VW Beetle incl. Convertible | Left-hand drive floor pedal, per EMPI |
| 1957–1967 | VW Karmann Ghia | Per EMPI |
| 1961–1966 | VW Type 3 | Similar kits are listed for Type 3; not confirmed for this part |
| 1968–1979 | Later Beetle & Super Beetle | Does not fit: later pedal uses a different kit (111 798 006) |
| 1950–1957 | Early Beetle | Not confirmed |
Specifications
| Spec | Value |
|---|---|
| Part number | JP Group JP-8716-0 |
| OE reference | 113 798 073 |
| JP Group reference | 8172150110 |
| UPC | 707924541632 |
| Sold as | Kit |
| Weight | 0.11 lb (EMPI) |
| Package | 5 x 3 x 1 in (EMPI) |
What's Included
- Accelerator pedal pivot / repair hardware as supplied by JP Group (contents not itemized by EMPI; typically pivot pin, roller, spring and clips)
Not Included
- Accelerator pedal arm and floor bracket
- Throttle cable
- Pedal cluster (clutch and brake pedals)
Why It Matters
On early Beetles and Ghias the throttle pedal hinges on the floor and pushes a roller against the throttle rod. When the pin and bushings wear, the pedal wobbles side to side, the roller sticks or squeaks, and the throttle can feel jerky or fail to return smoothly. A sticking throttle is unsafe, and a sloppy pedal makes smooth driving hard. This inexpensive kit restores a smooth, positive pedal without replacing the whole assembly.
Installation Notes
- Remove the floor mat to get at the pedal hinge.
- Note how the old spring and roller sit before taking them apart.
- Clean the hinge bracket and remove rust so the new pin turns freely.
- Grease the pivot and roller lightly and check the pedal returns fully on its own.
- Check throttle cable adjustment for full throttle and a clean idle return.
Before You Order
The quickest check is the year on your title and the pedal itself. Early Beetles and Ghias up to 1967 use a flat pedal that hinges at the floor with a small roller at the top that pushes the throttle rod. From the 1968 model year VW changed the pedal design, and those cars need the later repair kit. If your car has been converted to a later pedal cluster, or if the pedal has been swapped for an aftermarket roller pedal, compare your parts before you order. When in doubt, send us a photo of your pedal.
Frequently Asked Questions
Does it fit my 1965 Beetle?
Yes, EMPI lists 1958–1967 Beetles.
Does it fit my 1971 Super Beetle?
No. Later cars use a different pedal and repair kit.
Is this the same as OE 113 798 073?
Yes. JP Group cross-references JP-8716-0 to 113 798 073.
What else do I need?
Usually nothing, but replace the throttle cable if it is frayed or sticky.
Does it fit a right-hand-drive car?
Not confirmed. It is listed for left-hand-drive pedals.
Is it new?
Yes, a new JP Group kit.
Explore Related Categories
Interior & Pedals VW Beetle Parts VW Karmann Ghia Parts
California Prop 65 Warning: This product can expose you to chemicals including lead and/or lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov. Legal for use on pre-pollution-controlled vehicles only.
