JP Group ATE Front Wheel Cylinder, 22.2 mm | VW Beetle & Karmann Ghia 1958–1964 Front Drum | OE 113 611 057 (JP-8314-0)
Couldn't load pickup availability
- Vendor JP Group
- SKU JP-8314-0
- Barcode 707924526493
-
Fits
- 1958-1964 VW Beetle
- 1958-1964 VW Karmann Ghia
Not sure it fits? Call the shop: (657) 438-7002.
JP Group ATE Front Wheel Cylinder, 22.2 mm | VW Beetle & Karmann Ghia 1958–1964 Front Drum | OE 113 611 057 (JP-8314-0)
Short answer: The JP Group JP-8314-0 is an ATE-made 22.2 mm (7/8 in) front brake wheel cylinder for the front drum brakes of the 1958–1964 VW Beetle and Karmann Ghia, left or right. It replaces VW OE 113 611 057 (JP Group ref. 8161300807). Other catalogs list the same cylinder through 1979 drum-brake Beetles. Sold each.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 1958–1964 | VW Beetle | Front left or right, per EMPI |
| 1958–1964 | VW Karmann Ghia | Front left or right, per EMPI |
| 1965–1979 | VW Beetle & Super Beetle, front drums | Same OE per other catalogs — confirm |
| 1953–1957 | VW Beetle — does not fit | Earlier cylinder |
Specifications
| Spec | Detail |
|---|---|
| Part number | JP-8314-0 |
| OE reference | 113 611 057 |
| JP Group reference | 8161300807 |
| UPC | 707924526493 |
| Manufacturer | ATE |
| Bore | 22.2 mm (7/8 in) |
| Position | Front, left or right |
| Sold as | Each |
| Brand | JP Group (Denmark), distributed in the US by EMPI |
| Condition | New |
| Shipping weight | approx. 1 lb (estimate) |
| Package size | 5 x 4 x 3 in (estimated) |
What's Included / Not Included
- Included: One front wheel cylinder.
- Not included: Brake shoes, hoses, bleeder cap, hardware springs or brake fluid.
Why It Matters
A leaking wheel cylinder soaks the brake shoes in fluid, causes pulling to one side, a soft pedal and eventually a loss of braking. Cylinders that sat in an old car also seize, so one shoe drags and overheats. ATE was an original-equipment brake supplier to VW, so this cylinder is OE quality. We also carry ATE, LPR and EMPI front cylinders for the same cars under other part numbers.
Installation Notes
- Replace wheel cylinders in pairs on the same axle.
- Replace any fluid-soaked brake shoes; they cannot be cleaned reliably.
- Inspect the flexible brake hoses and replace cracked or swollen ones.
- Bleed the brakes with fresh DOT 3/4 fluid after fitting and adjust the shoes.
- Test the brakes at low speed before driving normally.
- We do not publish torque values here; use the factory workshop manual for your vehicle.
Frequently Asked Questions
Does the JP-8314-0 fit my 1962 Beetle?
Yes. EMPI lists the 1958–1964 Beetle front.
Does it fit my 1970 Beetle?
Other catalogs list 113 611 057 for later drum-brake Beetles too; EMPI only lists 1958–1964. Compare your old cylinder.
Left or right?
Either front side.
Is this the same as VW 113 611 057?
Yes. JP Group lists 113 611 057 as the OE reference.
Who makes it?
ATE, the original-equipment brake maker.
Should I replace both sides?
Yes, replace front cylinders as a pair.
Is it new?
Yes, it is a new ATE cylinder supplied by JP Group.
Explore Related Categories
Brakes & Components · VW Beetle Parts · VW Karmann Ghia Parts
⚠ WARNING (California Proposition 65): This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov. Parts are legal for use on pre-pollution-controlled vehicles only.
The Tech Bench Everything we know about doing the work, in one place — written and filmed on our own bench in Orange, California, with the same parts we sell you.
Pick a bench below. Written install guides, free decoder tools, install videos, and the fitment lookup — each one lives on its own page so you're not scrolling past nine systems to find the one you're working on.
Four benches
Pick the one that matches the job in front of youInstall Guides
The full written library — procedures, torque specs, and the order of operations that keeps you from taking something apart twice. Organised by system.
55 guides8 systems5 published Open the library 02Decoders & Lookup
Chassis number, Beetle M-code, Bus M-code. Free tools for pinning down exactly what you have before you spend money on a part that doesn't fit it.
Chassis No.M-PlateFree Open the decoders 03Watch & Learn
Install videos and build footage from the shop floor. Watch the part go in — then grab the kit from the same page.
InstallsBuildsYouTube Watch the videos 04Fitment Lookup
Year and model in, the parts that actually fit out. The fastest way from "I think it's a '67" to the right part number in your cart.
Year / ModelAll parts Open the lookupLatest from the bench
5Most recently publishedGear Ratio Calculator
Type 1 and Bus transaxles. Ring and pinion, gear ratios, tire height and shift rpm in — road speed, rpm drop on every shift, and cruise rpm out.
Type 1 · BusOpen the calculator CH01 Guide 01 Best sellerSnap-Lock Delrin Shift Bushing
The 20-minute fix that turns a sloppy shifter crisp — and the whole shift-linkage explained.
#CH01Read the guide BY01 Guide 27Big Washburn Windows
Large engine-bay access panels for dual-carb and big-engine builds — reach the carbs without pulling the motor.
#BY01Read the guide PMO ReferencePMO Carburetors: Triple-Throat Induction
The complete reference on PMO triple-throat carburetors for air-cooled Porsche — sizing, jetting, and setup.
PMORead the guide CH64 ChassisFlat Out Custom Shortened Pan Halves
Building a shortened dune buggy or kit car? Engineered pan halves put a straight floor under it without sectioning a stock VW pan.
#CH64Read the guideFrom the shop blog
3Shorter reads from the shop floorBig Washburn Carb Windows: What They Are and Why We Cut Them
The reasoning behind cutting the rear inner fenders open, before you read the full install guide.
Read the post BlogTunnel Access Plates: Why We Cut a Hole in Your Pan on Purpose
Why the center tunnel gets an access plate, and what it saves you the next time the linkage needs attention.
Read the post BlogSome Hot VWs That Came Through the Shop This Spring
A look at the cars on the lifts in Orange, California, and the work that went into them.
Read the postCan't find your job here?
Call the shop. If the guide isn't written yet, we'll walk you through it on the phone — fitment, torque, sequence, what to buy and what to skip.
(657) 438-7002Shop line — parts, fitment and technical questions. Orange, California.
Free shipping on domestic (U.S.) orders over $250 — no code needed; oversize and freight items are excluded and ship at carrier rates. Otherwise, domestic shipping is calculated at checkout based on the size, weight, and destination of your order.
Orders are typically processed within 24–48 hours before they ship. Once your order ships, you'll get an email with tracking information.
Shipping outside the U.S.? Contact us at (657) 438-7002 before you order and we'll confirm rates and options for your destination.