JP Group Ball Joint Boot Kit, Upper | VW Beetle 1966–1979 & Karmann Ghia 1966–1974 Ball Joint Front End | OE 131 405 375 A (JP-8265-0)
Couldn't load pickup availability
JP Group Ball Joint Boot Kit, Upper | VW Beetle 1966–1979 & Karmann Ghia 1966–1974 Ball Joint Front End | OE 131 405 375 A (JP-8265-0)
Short answer: JP Group JP-8265-0 is the rubber dust boot kit for the upper front ball joint on the ball-joint (1966-on) VW Beetle and Karmann Ghia. It replaces OE 131 405 375 A (JP ref 8140350310). EMPI gives no fitment list; the OE number fits the 1966–1979 Beetle and 1966–1974 Ghia. Sold as a set.
Part numbers: JP-8265-0 · OE 131 405 375 A · JP 8140350310 · UPC 707924526004
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 1966–1979 | VW Beetle with torsion-bar ball-joint front beam | Upper. Fitment from OE 131 405 375 A |
| 1966–1974 | VW Karmann Ghia | Upper. Fitment from OE number |
| 1971–1973 | Super Beetle 1302 lower ball joint | Other suppliers say it can be used; not confirmed |
| 1950–1965 | King pin / link pin Beetle | Does not fit |
Fitment comes from EMPI, the US distributor for JP Group, checked against the OE number. Where a row says "not confirmed", compare with your old part or ask us before you order.
Specifications
| Spec | Detail |
|---|---|
| Brand | JP Group (Denmark), distributed by EMPI |
| Part number | JP-8265-0 |
| OE / cross reference | 131 405 375 A |
| JP Group reference | 8140350310 |
| UPC | 707924526004 |
| Material | Rubber |
| Position | Upper ball joint, left or right |
| Sold as | Set (dust cap kit) |
| Shipping weight | About 0.25 lb (estimate) |
| Package size | 4 x 3 x 2 in (estimated) |
| Condition | New |
What's Included
- Upper ball joint dust boot kit as supplied by EMPI
Not Included
- Ball joint
- Grease
Why It Matters
A split boot lets water and grit into the ball joint. The joint then wears quickly and starts to clunk, and steering gets loose.
A boot is cheap. If the joint is still tight, a new boot keeps it alive much longer.
JP Group is a Danish maker of replacement parts for classic Volkswagens and Porsches. Its parts are sold under the JP Group, Dansk and Classic names, and EMPI is its US distributor. Washburn's Metal in Orange, California lists each JP part with its VW or Porsche OE number and its JP Group reference, so you can check it against your old part, your parts book or the stamp on the original before you order. If you are not sure whether this part fits your car, send us your year, model, chassis number and engine code and we will check it for you before it ships.
Installation Notes
- Check the ball joint for play first.
- Pack the new boot with grease.
- Seat the boot fully and fit its ring.
- Check the boot as the suspension moves through its travel.
Use the torque values and procedures in a factory or Bentley service manual for your car.
Frequently Asked Questions
Does it fit my 1968 Beetle?
Yes, ball-joint Beetles from 1966 use OE 131 405 375 A.
Does it fit my 1964 Beetle?
No. 1965 and earlier cars use king pins or link pins.
Upper or lower?
This is the upper boot.
Is this the same as 131 405 375 A?
Yes, EMPI lists that OE number.
How many do I need?
One per upper ball joint, two per car.
Is it new?
Yes, new.
Explore Related Categories
Suspension & Components | VW Beetle Parts | VW Karmann Ghia Parts | All VW Air-Cooled Parts
Volkswagen® and Porsche® model names are trademarks of their owners. Washburn's Metal is not affiliated with or endorsed by Volkswagen AG or Porsche AG. Part numbers are for reference only.
California Prop 65 Warning: This product can expose you to chemicals which are known to the State of California to cause cancer and reproductive harm. For more information, visit www.P65Warnings.ca.gov.
