JP Group Bumper Molding Clip, Front or Rear | VW Beetle & Super Beetle 1975–1979, Vanagon 1980–1987 | OE 171 807 249 A (JP-8487-0)
Couldn't load pickup availability
JP Group Bumper Molding Clip, Front or Rear | VW Beetle & Super Beetle 1975–1979, Vanagon 1980–1987 | OE 171 807 249 A (JP-8487-0)
Short answer: JP Group JP-8487-0 is the small clip that holds the rubber impact strip (bumper molding) onto the steel Europa-style bumpers of the 1975–1979 VW Beetle and Super Beetle, front and rear. EMPI also lists the 1975–1977 Scirocco and 1980–1987 Vanagon. It replaces OE 171 807 249 A, JP Group reference 8184151106. Sold each.
Part numbers: JP-8487-0 · OE 171 807 249 A · JP Group 8184151106 · UPC 707924528220
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 1975–1979 | VW Beetle sedan and convertible | Front and rear bumpers with rubber impact strip. EMPI fitment |
| 1975–1980 | VW Super Beetle | Front and rear. EMPI fitment (1980 = late convertible) |
| 1980–1987 | VW Vanagon | EMPI fitment. Some Vanagons use the press-in clip OE 251 807 249 (JP-1334-0): compare with your old clip |
| 1975–1977 | VW Scirocco Mk1 | EMPI fitment |
| 1968–1974 | Beetle with blade or early Europa bumpers without rubber strip | Does not apply: those bumpers have no impact strip |
Fitment comes from EMPI, the US distributor for JP Group, checked against the OE number. Heritage Parts Centre lists the same OE 171 807 249 A for the 1975–1979 Beetle and the Vanagon.
Specifications
| Spec | Detail |
|---|---|
| Brand | JP Group (Denmark), distributed by EMPI |
| Part number | JP-8487-0 |
| OE reference | 171 807 249 A |
| JP Group reference | 8184151106 |
| UPC | 707924528220 |
| Position | Front or rear bumper |
| Material / finish | Not stated by EMPI |
| Country of origin | Not stated by EMPI |
| Sold as | Each |
| Shipping weight | About 0.1 lb (estimate) |
| Package size | 3 x 2 x 1 in (estimate) |
| Condition | New |
What's Included
- One bumper molding clip
Not Included
- Rubber impact strip (bumper molding); the rear Beetle strip is JP-8495-0
- Bumper, bumper irons and bolts
- The rest of the clips: a full bumper takes several
Why It Matters
The 1975 and later Beetle bumpers carry a rubber impact strip that is held on by a row of these clips. The originals are now more than forty years old. They rust, go brittle and snap when the strip is pulled off, and a strip held by too few clips lifts at the ends, flaps at speed and lets water sit against the bumper, which rusts it from behind.
Fitting a new impact strip or a rechromed or repainted bumper is the time to fit new clips in every hole. They cost very little and make the strip sit tight and straight, the way it left the factory.
JP Group is a Danish maker of replacement parts for classic Volkswagens and Porsches. Its parts are sold under the JP Group, Dansk and Classic names, and EMPI is its US distributor. Washburn's Metal in Orange, California lists each JP part with its VW or Porsche OE number and its JP Group reference, so you can check it against your old part, your parts book or the stamp on the original before you order. If you are not sure whether this part fits your car, send us your year, model and chassis number and we will check it for you before it ships.
Installation Notes
- Pull the impact strip off slowly from one end; old clips usually break, so plan to replace all of them.
- Clean the clip holes in the bumper and remove rust before fitting new clips.
- Fit the clips into the bumper the same way the originals were installed, then line the strip up and press it home from one end.
- A little soapy water helps the rubber slide over the clips.
Frequently Asked Questions
Does this fit my 1977 Beetle?
Yes. EMPI lists the 1975–1979 Beetle, front and rear bumpers.
Does it fit my 1973 Super Beetle?
No. 1973–1974 bumpers have no rubber impact strip, so they do not use this clip.
Is this the same as OE 171 807 249 A?
Yes. EMPI lists JP-8487-0 against OE 171 807 249 A.
How many do I need?
One per hole in the bumper. Count the holes in yours and add a couple of spares. They are sold each.
Does it fit my Vanagon?
EMPI lists 1980–1987 Vanagons. Some Vanagons use the press-in clip 251 807 249 (JP-1334-0), so compare with your old clip.
Is it new?
Yes, new JP Group.
Explore Related Categories
VW Beetle Parts | VW Super Beetle Parts | VW Vanagon Parts | Body Panels & Sheet Metal | All VW Air-Cooled Parts
Volkswagen® model names are trademarks of their owner. Washburn's Metal is not affiliated with or endorsed by Volkswagen AG. Part numbers are for reference only.
California Prop 65 Warning: This product can expose you to chemicals which are known to the State of California to cause cancer and reproductive harm. For more information, visit www.P65Warnings.ca.gov.
