JP Group Chrome Valve Cover Set (Without Clips) | VW Beetle, Bus, Ghia, Type 3 & Thing Upright Engines | OE 113 101 475 B (JP-8656-0)
Couldn't load pickup availability
JP Group Chrome Valve Cover Set (Without Clips) | VW Beetle, Bus, Ghia, Type 3 & Thing Upright Engines | OE 113 101 475 B (JP-8656-0)
Short answer: The JP Group JP-8656-0 is a chrome set of the stock-shape clip-on valve covers for the air-cooled VW Type 1 upright engine used in the Beetle, the Bus up to 1971, the Karmann Ghia, Type 3 and Thing. It replaces OE 113 101 475 B (JP Group ref. 8111350616). The bail clips and cork gaskets are not included; reuse yours or order new ones.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 1961–1979 | VW Beetle & Super Beetle upright engine | Bail-clip heads; by OE 113 101 475 B |
| 1961–1971 | VW Bus with Type 1 upright engine | Type 4 Bus engines do not fit |
| 1961–1974 | VW Karmann Ghia | By OE |
| 1961–1973 | VW Type 3 (pancake Type 1 engine) | By OE |
| 1973–1974 | VW Thing | By OE |
| Any | Type 4 engines (1972–79 Bus 1.7–2.0, 914) — does not fit | Bolt-on covers |
EMPI does not publish a fitment list for this part. Fitment above is from the OE number 113 101 475 B, which covers stock-style heads with bail clips. Aftermarket heads with bolt-on covers will not take these.
Specifications
| Spec | Detail |
|---|---|
| Part number | JP-8656-0 |
| OE reference | 113 101 475 B |
| JP Group reference | 8111350616 |
| UPC | 707924539875 |
| Finish | Chrome |
| Style | Stock shape, bail-clip (clip-on) |
| Clips included | No |
| Sold as | Set, per EMPI |
| Brand | JP Group (Denmark), distributed in the US by EMPI |
| Condition | New |
| Shipping weight | 0.8 lb (EMPI published) |
| Package size | 12 x 3 x 2 in |
What's Included
- Chrome valve cover set, as pictured.
Not Included
- Valve cover bail clips (bales)
- Cork or rubber valve cover gaskets
- Breather or PCV fittings
Why It Matters
Chrome valve covers are one of the classic dress-up parts on an air-cooled VW, and they show at every car show. Old covers get dented by jacks and road debris. A dented cover can touch a rocker arm, and a bent lip will leak oil onto the heater boxes and exhaust.
A new set that is straight gives a clean gasket seal. It also suits a fresh engine better than old, pitted chrome.
Installation Notes
- Use new gaskets every time the covers come off.
- Clean the sealing surface on the head before you fit the cover.
- Check the cover does not touch the rocker arms or adjusting screws, especially with high-ratio rockers.
- Snap the bail clips over the cover so they sit in the center groove.
- Run the engine and check for oil leaks once it is hot.
- We do not publish torque values here; use the factory workshop manual (Bentley) for your vehicle.
Frequently Asked Questions
Does it fit my 1974 Beetle?
Yes, if it has the stock upright engine with bail-clip valve covers.
Are the clips included?
No. This set is without clips. Reuse yours or order new bail clips.
Are gaskets included?
No. Always fit new valve cover gaskets.
Will it fit my 1976 Bus?
No. 1972–1979 Bus Type 4 engines use bolt-on covers.
Is this the same as VW 113 101 475 B?
It is the JP Group chrome version listed against OE 113 101 475 B.
Will it clear high-ratio rockers?
Not always. Check the clearance before you run the engine.
Is it new?
Yes. New, from JP Group of Denmark, sold through EMPI.
Explore Related Categories
Engine Parts & Performance · Engine Tin & Components · VW Beetle Parts
California Prop 65 Warning: This product can expose you to chemicals including lead and/or lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov. Legal for use on pre-pollution-controlled vehicles only.
