JP Group Door Handle Seal, Rear (Large) | VW Vanagon 1980–1991 Cab Door | OE 251 837 211 (JP-8559-0)
Couldn't load pickup availability
JP Group Door Handle Seal, Rear — VW Vanagon 1980–1991 (JP-8559-0)
Short answer: JP Group JP-8559-0 is the rear (larger) rubber gasket that sits between the outside cab door handle and the door skin on the 1980–1991 VW Vanagon. It stops water and scratches under the handle. It replaces VW 251 837 211; JP ref. 8187150900. Sold each — one per door.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 1980–1991 | VW Vanagon incl. Westfalia, Syncro, GL | Front cab doors, rear handle gasket, per EMPI |
| 1980–1991 | Vanagon sliding door handle | Not this part — the sliding door uses a different seal |
| 1968–1979 | VW Bus | Does not fit |
Fitment comes from EMPI, the US distributor for JP Group. If your vehicle has been modified or parts have been swapped over the years, compare your old part or the OE number before ordering. Questions? Contact us with your year, model and chassis number and we will check it for you.
Specifications
| Spec | Detail |
|---|---|
| Part number | JP-8559-0 |
| VW OE reference | 251 837 211 |
| JP Group reference | 8187150900 |
| UPC | 707924528947 |
| Position | Rear part of the outside door handle (larger gasket) |
| Material | Rubber |
| Sold as | Each |
| Brand | JP Group (Denmark), distributed in the US by EMPI |
| Condition | New |
| Shipping weight | Approx. 0.1 lb (estimate) |
| Package size | 4 x 3 x 1 in (estimate) |
What's Included
- One rear door handle gasket.
Not Included
- Front (small) handle gasket, door handle or screws.
- Order two for both cab doors.
Why It Matters
The outside door handle on a Vanagon cab door sits on two small rubber gaskets, one at each end. Over time they flatten, crack and fall apart. Water then gets behind the handle into the door, the handle rocks and the paint around it wears through to bare metal. New gaskets are cheap and are the right fix whenever the handle comes off for a lock repair or paint.
JP Group is a Danish supplier that has specialised in classic Volkswagen and Porsche parts for decades, and EMPI distributes the range in the USA. Their parts are made to match the original design, so they fit without the guesswork that comes with generic replacements.
Installation Notes
- Open the door and remove the door panel and plastic sheet to reach the handle screws.
- Remove the two screws and lift the handle off the door skin.
- Clean the paint under the handle; touch up any bare metal.
- Fit the new gasket at the rear end of the handle, refit the handle and tighten the screws evenly, just snug.
- Follow the factory workshop manual (Bentley or VW) for your model. If in doubt, have a qualified mechanic fit the part.
Frequently Asked Questions
Does it fit my 1987 Westfalia?
Yes. EMPI lists all 1980–1991 Vanagons.
Front or rear?
This is the rear (larger) gasket for the outside cab door handle.
How many do I need?
One per door. Two for both cab doors.
Is it the same as VW 251 837 211?
Yes. EMPI lists 251 837 211 as the OE reference.
Does it fit the sliding door?
No. The sliding door handle uses a different seal.
Is it new?
Yes, new JP Group rubber.
Explore Related Categories
VW Vanagon Parts · Body Panels & Sheet Metal · All VW Air-Cooled Parts
⚠ WARNING (California Proposition 65): This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov. Parts are legal for use on pre-pollution-controlled vehicles only.
