JP Group Door Window Lift Channel, Left or Right | VW Karmann Ghia 1960–1974 | JP 8188101100 (JP-8570-0)
Couldn't load pickup availability
JP Group Door Window Lift Channel, Left or Right — VW Karmann Ghia 1960–1974 (JP-8570-0)
Short answer: JP Group JP-8570-0 is the lift channel that clamps to the bottom edge of the door glass and connects it to the window regulator on the VW Karmann Ghia. EMPI lists it for the 1960–1974 Ghia, both sides. JP Group ref. 8188101100. Sold each.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 1960–1974 | VW Karmann Ghia Type 14 | Left or right door, per EMPI |
| 1956–1959 | VW Karmann Ghia | Not listed by EMPI |
| 1962–1969 | Type 34 Razor Ghia | Does not fit |
| Any | VW Beetle | Does not fit |
Fitment comes from EMPI, the US distributor for JP Group. If your vehicle has been modified or parts have been swapped over the years, compare your old part or the OE number before ordering. Questions? Contact us with your year, model and chassis number and we will check it for you.
Specifications
| Spec | Detail |
|---|---|
| Part number | JP-8570-0 |
| JP Group reference | 8188101100 |
| VW OE reference | Not published by EMPI (EMPI attribute shows "4") |
| UPC | 707924529050 |
| Position | Door glass, left or right |
| Material | Steel |
| Sold as | Each |
| Brand | JP Group (Denmark), distributed in the US by EMPI |
| Condition | New |
| Shipping weight | Approx. 1.0 lb (estimate) |
| Package size | 18 x 4 x 2 in (estimate) |
What's Included
- One window lift channel.
Not Included
- Rubber channel insert / glass setting tape, regulator, glass.
Why It Matters
The lift channel is a steel U-section that grips the bottom of the door glass. The regulator arm slides in it to move the window up and down. Old channels rust, bend and lose their grip on the glass. Then the glass slips, tilts or comes loose, the window jams and the regulator can be damaged. A new channel is the right fix when the glass has come loose or when you replace the regulator.
JP Group is a Danish supplier that has specialised in classic Volkswagen and Porsche parts for decades, and EMPI distributes the range in the USA. Their parts are made to match the original design, so they fit without the guesswork that comes with generic replacements.
Installation Notes
- Remove the door panel and lower the glass. Separate the regulator arm from the channel and lift the glass out.
- Tap the old channel off the glass with a soft mallet. Clean the glass edge.
- Fit new rubber setting tape in the channel, then press the channel on the glass in the same position as the old one.
- Refit the glass and test the window before you put the panel back.
- Follow the factory workshop manual (Bentley or VW) for your model. If in doubt, have a qualified mechanic fit the part.
Frequently Asked Questions
Does it fit my 1971 Karmann Ghia?
Yes. EMPI lists the 1960–1974 Karmann Ghia.
Left or right?
Either side.
Do I need the rubber too?
Yes, fit new rubber setting tape between the channel and the glass.
Is there a VW OE number?
EMPI does not publish one. The JP Group reference is 8188101100.
Does it fit a convertible?
EMPI does not separate coupe and convertible; compare with your old part.
Is it new?
Yes, new JP Group part.
Explore Related Categories
VW Karmann Ghia Parts · Body Panels & Sheet Metal · All VW Air-Cooled Parts
⚠ WARNING (California Proposition 65): This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov. Parts are legal for use on pre-pollution-controlled vehicles only.
