JP Group Heater Cable Boot, Rubber | VW Bus 1968–1979 & Vanagon 1980–1982 Air-Cooled | OE 211 711 663 (JP-9713-0)
Couldn't load pickup availability
JP Group Heater Cable Boot, Rubber — VW Bus 1968–1979 & Vanagon 1980–1982 (JP-9713-0)
Short answer: JP Group JP-9713-0 is a small rubber boot that seals the end of a heater control cable where it leaves its guide tube on the 1968–1979 VW Bay Window Bus (including pickups) and the 1980–1982 air-cooled Vanagon. It replaces VW OE 211 711 663 (JP Group ref 8170550300), keeping water and grit out of the cable so the heat lever keeps moving freely. Sold each.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 1968–1979 | VW Bay Window Bus (Type 2), incl. Westfalia | Per EMPI |
| 1968–1974 | VW Bus single cab / double cab pickup | Per EMPI |
| 1980–1982 | VW Vanagon air-cooled | Per EMPI |
| 1983–1991 | VW Vanagon water-cooled | Not listed — different heater controls |
| Any | VW Beetle | Not listed — Beetle heater cable boots are a different part |
Specifications
| Spec | Value |
|---|---|
| Part number | JP Group JP-9713-0 |
| OE reference | 211 711 663 |
| JP Group reference | 8170550300 |
| UPC | 707924545999 |
| Material | Rubber |
| Sold as | Each |
| Shipping weight | 0.02 lb (EMPI) |
| Package | 8 x 13 x 1 in (EMPI) |
What's Included
- One rubber heater cable boot
Not Included
- Heater cables, guide tubes or ferrules
- Heater box flap levers or springs
Why It Matters
On an air-cooled Bus the heater cables run from the lever by the driver's seat back through the chassis to the heater boxes at the engine. Where each cable comes out of its tube, a rubber boot keeps road water, sand and salt from getting into the tube. Once the old boot cracks or goes missing, the cable rusts inside the tube and the heater lever gets stiff, sticks, or the cable snaps — and then you have no heat or a flap stuck open. A new boot is the cheapest way to protect a new or freshly lubricated heater cable.
Installation Notes
- Slide the boot over the cable before connecting the cable end to the heater box flap lever.
- Seat the boot fully over the end of the guide tube so it seals.
- Lubricate the cable inside the tube with a light oil or cable lube before refitting.
- Check the heater lever moves the flaps fully open and closed after adjustment.
Frequently Asked Questions
Does it fit my 1972 Bus?
Yes. EMPI lists 1968–1979 Bay Window Bus.
Does it fit my 1981 Vanagon?
Yes, air-cooled 1980–1982 Vanagons are listed.
Is this the same as OE 211 711 663?
Yes. JP Group cross-references JP-9713-0 to VW 211 711 663.
How many do I need?
Usually one per cable end that is exposed. Count your old boots; it is sold each.
Is it the same as the 211 711 633 tube end boot?
No. That is a different part number. Compare with the photo.
Is it new?
Yes, new JP Group.
Explore Related Categories
VW Bus / Type 2 Parts VW Vanagon Parts
California Prop 65 Warning: This product can expose you to chemicals including lead and/or lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov. Legal for use on pre-pollution-controlled vehicles only.
