JP Group Oil Cooler Mount (Adapter Bracket), Aluminum | VW Beetle, Super Beetle, Ghia & Thing 1971–1979, Bus 1970–1971 | OE 113 117 301 (JP-8659-0)
Couldn't load pickup availability
JP Group Oil Cooler Mount (Adapter Bracket), Aluminum | VW Beetle, Super Beetle, Ghia & Thing 1971–1979, Bus 1970–1971 | OE 113 117 301 (JP-8659-0)
Short answer: The JP Group JP-8659-0 is the aluminum oil cooler mount (adapter bracket) that sits on the crankcase under the doghouse-style oil cooler on the 1971–1979 VW Type 1 dual-port engine. EMPI lists the Beetle and Super Beetle, Karmann Ghia 1971–1974, Thing 1973–1974 and Bus 1970–1971. It replaces OE 113 117 301 (JP Group ref. 8113550106).
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 1971–1979 | VW Beetle & Super Beetle | Doghouse oil cooler, per EMPI |
| 1971–1974 | VW Karmann Ghia | Per EMPI |
| 1973–1974 | VW Thing | Per EMPI |
| 1970–1971 | VW Bus with Type 1 engine | Per EMPI |
| 1961–1970 | Single-port / early coolers — check | Early cases with 8 mm oil ports need the 8–10 mm seal kit (JP-8660-0) |
| Any | Type 4 engines — does not fit | Different cooler |
Specifications
| Spec | Detail |
|---|---|
| Part number | JP-8659-0 |
| OE reference | 113 117 301 |
| JP Group reference | 8113550106 |
| UPC | 707924539905 |
| Material | Aluminum |
| Application | Doghouse-style (offset) oil cooler |
| Sold as | Each |
| Brand | JP Group (Denmark), distributed in the US by EMPI |
| Condition | New |
| Shipping weight | 0.6 lb (EMPI published) |
| Package size | 3 x 6 x 4 in |
What's Included
- One aluminum oil cooler mount.
Not Included
- Oil cooler
- Oil cooler seals
- Mounting nuts, washers or studs
Why It Matters
The doghouse oil cooler sits off to the side, in the fan shroud's own air path. It needs this adapter to mount it on the case and carry oil to and from the cooler. The mounting surfaces on a used adapter are often gouged, cracked or stripped, which causes oil leaks inside the fan shroud. Oil there gets blown all over the engine.
A new adapter with clean sealing faces is the right base for a new cooler and seals. It is also the part you need to convert an older engine to the more efficient doghouse cooler and shroud.
Installation Notes
- Fit new oil cooler seals every time, with the correct size for your case's oil ports.
- Clean the case and adapter faces. Old seals often stick and leave residue.
- Tighten the nuts evenly and do not over-tighten into the case studs.
- Make sure the cooler sits square and does not touch the shroud.
- Run the engine to temperature and check for leaks before refitting the shroud tin.
- We do not publish torque values here; use the factory workshop manual (Bentley) for your vehicle.
Frequently Asked Questions
Does it fit my 1974 Beetle?
Yes. EMPI lists the 1971–1979 Beetle and Super Beetle.
I have a 1968 engine. Can I use the doghouse cooler?
Yes, with this adapter, the doghouse shroud and the 8–10 mm seal kit (JP-8660-0) for early 8 mm oil ports.
Is this the same as VW 113 117 301?
It is the JP Group replacement listed against OE 113 117 301.
Are seals included?
No. Order new oil cooler seals.
Does it fit a Type 4 Bus engine?
No.
Is it new?
Yes. New aluminum part, from JP Group of Denmark, sold through EMPI.
Explore Related Categories
Oil Cooling & Components · Engine Parts & Performance · VW Beetle Parts
California Prop 65 Warning: This product can expose you to chemicals including lead and/or lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov. Legal for use on pre-pollution-controlled vehicles only.
