JP Group Rear Bumper End Cap (Corner), Right | VW EuroVan 1992–1995 | Ref 955896-2 (JP-3224-0)
Couldn't load pickup availability
JP Group Rear Bumper End Cap (Corner), Right — VW EuroVan 1992–1995 (JP-3224-0)
Short answer: JP Group JP-3224-0 is the right rear bumper end cap (bumper corner) for the 1992–1995 VW EuroVan (T4) with the three-piece rear bumper. EMPI reference 955896-2, JP Group reference 1184400280. It replaces a cracked, faded or missing passenger-side rear corner. Sold each.
Part numbers: JP-3224-0 · ref 955896-2 · JP 1184400280 · UPC 707924570564
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 1992–1995 | VW EuroVan (T4), three-piece rear bumper | Right rear end cap (EMPI) |
| 1996–2003 | VW EuroVan, one-piece rear bumper | Not confirmed — later vans use a one-piece bumper |
| All | EuroVan left rear corner | Does not fit — right side only |
| 1980–1991 | VW Vanagon | Does not fit |
EMPI lists this end cap for 1992–1995 EuroVans. Many 1996-on vans have a one-piece rear bumper with no separate corners. Check that your van has a separate corner piece before ordering.
Specifications
| Spec | Detail |
|---|---|
| Brand | JP Group (Denmark), US distributor EMPI |
| Part number | JP-3224-0 |
| Reference | 955896-2 |
| JP Group reference | 1184400280 |
| UPC | 707924570564 |
| Position | Rear, right (passenger side) |
| Sold as | Each |
| Shipping weight | Approx. 2 lb (estimate, not yet measured) |
| Condition | New |
What's Included
- One right rear bumper end cap
Not Included
- Left end cap
- Bumper center section or bumper iron
- Retaining clips and fasteners (reuse or replace)
Why It Matters
The rear corners on a EuroVan take every parking-lot bump. The plastic goes grey and brittle, cracks at the mounting tabs and eventually falls off, leaving the bumper iron exposed and the rear of the van looking tired.
A new end cap restores the look and closes off the corner so water and dirt are not thrown into the body seam. JP Group is a Danish maker of replacement parts for classic and later Volkswagens, sold in the US through EMPI. Washburn's Metal in Orange, CA lists each JP part with its VW OE number and JP reference so you can check it against your old part before you order.
Installation Notes
- Remove the old end cap fasteners from inside the bumper / wheel-well side.
- Clean the mounting area and check the bumper iron and clips; replace broken retaining clips.
- Fit the new cap, line it up with the center section, and tighten the fasteners evenly.
- Paint to match if your van has color-coded bumpers.
Frequently Asked Questions
Does it fit my 1994 EuroVan?
Yes. EMPI lists 1992–1995 EuroVan, rear right.
Does it fit a 1999 EuroVan?
Not confirmed. Later vans usually have a one-piece rear bumper.
Which side is right?
Right is the passenger side on a US van.
Is it painted?
EMPI does not list a finish. Check the photo, and paint to match if your bumpers are body color.
Is 955896-2 a VW part number?
No. It is the repair / aftermarket reference EMPI lists.
What else do I need?
New retaining clips if your old ones are broken.
Is it new?
Yes, new JP Group.
Explore Related Categories
Volkswagen® and model names are trademarks of Volkswagen AG. Washburn's Metal is not affiliated with or endorsed by Volkswagen. Part numbers are for reference only.
California Prop 65 Warning: This product can expose you to chemicals which are known to the State of California to cause cancer and reproductive harm. For more information, visit www.P65Warnings.ca.gov.
