JP Group Rear Wheelhouse Section with Complete Bumper Bracket, Left | VW Beetle & Super Beetle 1972–1979 | Ref 951062-3 (JP-8633-0)
Couldn't load pickup availability
JP Group Rear Wheelhouse Section with Complete Bumper Bracket, Left | VW Beetle & Super Beetle 1972–1979 | Ref 951062-3 (JP-8633-0)
Short answer: The JP Group JP-8633-0 is the weld-in rear wheelhouse repair section, left side, with the complete rear bumper bracket mount, for the 1972–1979 VW Beetle and the 1971–1980 Super Beetle. It is the inner panel the rear bumper bracket bolts through. Ref 951062-3, JP Group 8182450370. Sold each.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 1972–1979 | VW Beetle sedan (Type 1) | Rear left (driver side), per EMPI |
| 1971–1980 | VW Super Beetle sedan & convertible | Rear left, per EMPI |
| 1968–1971 | Beetle — not confirmed | Earlier panels differ; Mid America sells 1968–1973 versions |
| 1972–1979 | Rear right | Not this part |
Specifications
| Spec | Detail |
|---|---|
| Part number | JP-8633-0 |
| Repair panel reference | 951062-3 |
| JP Group reference | 8182450370 |
| UPC | 707924535822 |
| Material | Steel, transit primer |
| Position | Rear left, inner wheelhouse with bumper bracket mount |
| Sold as | Each |
| Brand | JP Group (Denmark), distributed in the US by EMPI |
| Condition | New |
| Shipping weight | 2.7 lb (EMPI published) |
| Package size | 12 x 18 x 2 in |
What's Included
- One left rear wheelhouse section with bumper bracket mount, as pictured.
Not Included
- Right side
- Rear bumper bracket (iron), bolts or seals
- Weld-through primer or seam sealer
Why It Matters
The rear bumper brackets on a Beetle pass through the body just in front of the rear wheelhouse. Water, salt and road dirt pack into this pocket, and the panel rots around the bracket hole. Once it goes, the bumper sags or moves and the rot spreads into the wheelhouse and the rear quarter.
A sagging rear bumper is the most common sign. This section gives you the formed bracket area and the surrounding wheelhouse metal in one piece, so the bumper sits at the right height after the repair.
Installation Notes
- This is a weld-in panel. Fitting it is body-shop work.
- Fit the bumper bracket loosely before you weld so the panel goes in at the right position and angle.
- Remove the transit primer at the weld areas and use weld-through primer on the seams.
- Seal all seams and treat the inside of the wheelhouse with cavity wax or undercoat.
- Check the rear quarter and the heater channel nearby. They often rot at the same time.
- We do not publish torque values here; use the factory workshop manual (Bentley) for your vehicle.
Frequently Asked Questions
Does it fit my 1974 Super Beetle?
Yes. EMPI lists it for the 1971–1980 Super Beetle, rear left.
Does it fit a 1969 Beetle?
It is not confirmed for 1968–1971. Check your old panel.
Left or right — how do I tell?
This is the left rear, the driver side on a US car.
Is the bumper bracket iron included?
No. This is the body panel the bracket mounts through.
Do I need to weld it?
Yes. It is a weld-in repair section.
Is it new?
Yes. New JP Group steel, supplied in transit primer.
Explore Related Categories
Body Panels & Sheet Metal · VW Beetle Parts · VW Super Beetle Parts
California Prop 65 Warning: This product can expose you to chemicals including lead and/or lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov. Legal for use on pre-pollution-controlled vehicles only.
