JP Group Roof-Mount "Beesting" Antenna, Manual, 410 mm with Lead | VW Golf GTI 16V 1987–1991 | OE Z 051 857 (JP-3154-0)
Couldn't load pickup availability
JP Group Roof-Mount "Beesting" Antenna, 410 mm with Lead — VW Golf GTI 16V, OE Z 051 857 (JP-3154-0)
Short answer: JP Group JP-3154-0 is a 410 mm manual (non-powered) roof-mount antenna with its cable lead, OE Z 051 857 (JP ref 1100900300). EMPI lists it for the 1987–1991 VW Golf GTI 16-Valve, where it is the classic angled "beesting" antenna at the front of the roof. It also suits other Mk1 / Mk2 VWs with the same roof antenna hole. Sold each.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 1987–1991 | VW Golf GTI 16V (Mk2) | EMPI fitment, roof mount |
| 1985–1992 | VW Golf / Jetta Mk2 with factory roof antenna | Same Z 051 857 style per VW accessory listings. Confirm that your roof has the antenna hole. |
| 1975–1992 | VW Rabbit / Golf Mk1, Scirocco | Can be fitted, but drilling the roof is needed if there is no existing hole |
| Any | Cars with a fender or windshield antenna | Does not fit without drilling the roof and running a new lead |
| Any | Air-cooled VW Beetle, Bus, Vanagon | Not intended |
Specifications
| Spec | Value |
|---|---|
| Part number | JP Group JP-3154-0 |
| OE / accessory reference | Z 051 857 |
| JP Group reference | 1100900300 |
| UPC | 707924541366 |
| Type | Manual (passive), not amplified |
| Mast length | 410 mm (approx. 16 in) |
| Mount | Roof, with lead (cable) |
| Sold as | Each |
| Shipping weight | 0.67 lb (EMPI) |
| Package | 23 x 4 x 1 in (EMPI) |
What's Included
- Antenna base and 410 mm mast
- Antenna lead (cable) to the radio
Not Included
- Radio, amplifier or adapter for modern head units
- Headliner clips or trim
Why It Matters
The angled roof antenna is a signature detail of the 1980s Golf GTI 16V, and original ones are now often broken, bent, chalky or missing. A damaged mast or a corroded base gives weak, noisy FM reception, and a cracked base gasket lets water into the headliner, leaving stains or wet carpets. A fresh antenna with a new lead restores reception and keeps the roof sealed. It is also a common finishing touch for anyone restoring a Mk2 GTI or Jetta GLI to original.
Installation Notes
- Lower the front of the headliner or remove the dome light area to reach the antenna nut and lead.
- Clean the roof around the hole and remove any rust before fitting the new base, so the gasket seals and the ground contact is good.
- Route the lead down the A-pillar to the radio, avoiding sharp edges and airbag areas on later cars.
- Check reception before refitting the trim.
- On cars without a hole, mark carefully and treat the bare metal with primer before fitting.
Frequently Asked Questions
Does it fit my 1990 Golf GTI 16V?
Yes. EMPI lists the 1987–1991 Golf GTI 16-Valve.
Will it fit my Jetta?
If your Mk2 Jetta has the factory roof antenna hole, it should fit. Compare it with your old base. Otherwise drilling is needed.
Is this the same as Z 051 857?
Yes. JP Group cross-references JP-3154-0 to Z 051 857.
Is it amplified?
No. It is a manual (passive) antenna, like the original.
Does it come with the cable?
Yes, it comes with the lead.
Will it stop my roof leak?
A new base gasket stops leaks at the antenna. Also check the sunroof drains if your car has a sunroof.
Is it new?
Yes, new JP Group.
Explore Related Categories
Volkswagen® and model names are trademarks of Volkswagen AG. Washburn's Metal is not affiliated with or endorsed by Volkswagen. Part numbers are for reference only.
California Prop 65 Warning: This product can expose you to chemicals which are known to the State of California to cause cancer and reproductive harm. For more information, visit www.P65Warnings.ca.gov. Legal for use on pre-pollution-controlled vehicles only.
