JP Group Running Board Molding, 9 mm Polished Aluminum | VW Beetle & Super Beetle 1973–1979 | OE 113 853 555 D (JP-8413-0)
Couldn't load pickup availability
JP Group Running Board Molding, 9 mm Polished Aluminum — VW Beetle 1973–1979 (JP-8413-0)
Short answer: JP Group JP-8413-0 is a 9 mm (commonly called 10 mm) polished aluminum running board molding in German OE quality for the 1973–1979 VW Beetle and 1973–1980 Super Beetle. It fits left or right. It replaces VW 113 853 555 D. JP ref. 8181550700. Sold each — order two for both sides.
Part numbers: JP-8413-0 · VW OE 113 853 555 D · JP Group 8181550700 · UPC 707924527483
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 1973–1979 | VW Beetle sedan & Convertible | Left or right, per EMPI |
| 1973–1980 | VW Super Beetle | Left or right, per EMPI |
| 1967–1972 | VW Beetle | Does not fit — uses 18 mm molding |
| 1946–1966 | VW Beetle | Does not fit — uses 33 mm molding |
Specifications
| Spec | Detail |
|---|---|
| Brand | JP Group (Denmark) |
| Part number | JP-8413-0 |
| VW OE reference | 113 853 555 D |
| JP Group reference | 8181550700 |
| UPC | 707924527483 |
| Width | 9 mm (sold in the US as 10 mm) |
| Material / finish | Aluminum, polished |
| Quality | German OE quality per EMPI |
| Fits | Left or right running board |
| Sold as | Each |
| Weight | Not published — shipping estimate 1 lb (long package) |
What's Included / Not Included
- Included: one running board molding strip.
- Not included: molding clips or the running board itself. Order two moldings for both sides.
Why It Matters
The bright molding along the outer edge of the running board is the finishing touch on the side of a Beetle. Originals get dented by feet and curbs, corrode where the clips sit and fade to a dull gray. A bent or missing strip also lets the rubber tread edge peel away.
A new polished strip makes even used running boards look much better and is a cheap way to sharpen a car's side profile. Molding width tells you the year: 1973–1979 cars use the narrow 9–10 mm strip.
This is a German OE-quality aluminum part, not the thin chrome-look plastic sold by some suppliers.
Installation Notes
- Pry off the old molding carefully; note how it hooks into the clips.
- Replace broken or rusted clips — a car set of 1973–1979 molding clips is cheap.
- Start at one end and press the molding onto the clips progressively. Use a soft mallet or the heel of your hand, never a steel hammer.
- Trim the ends only if needed, and file any cut edge smooth.
Frequently Asked Questions
Does this fit my 1977 Beetle?
Yes. EMPI lists it for 1973–1979 Beetle and 1973–1980 Super Beetle.
Left or right?
Either. The same molding fits both sides. Order two for the pair.
Is this the same as VW 113 853 555 D?
Yes. EMPI lists 113 853 555 D as the OE reference.
9 mm or 10 mm?
Same part. JP Group lists 9 mm; US sellers usually call the 1973–1979 molding 10 mm.
Does it fit my 1970 Beetle?
No. 1967–1972 Beetles use 18 mm molding.
Is it new?
Yes, new polished aluminum, German OE quality.
Explore Related Categories
VW Beetle Parts · VW Super Beetle Parts · Body Panels & Sheet Metal · All VW Air-Cooled Parts
⚠ WARNING (California Proposition 65): This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov. Parts are legal for use on pre-pollution-controlled vehicles only.
