JP Group Sebring Sport Exhaust System with J-Pipes, No Heat, Stainless | VW Beetle 1966–1973 & Karmann Ghia 1966–1974 1300–1600cc | VW-92760 (JP-8179-0)
Couldn't load pickup availability
JP Group Sebring Sport Exhaust with J-Pipes, Without Heating — VW Beetle & Karmann Ghia (JP-8179-0)
The JP Group JP-8179-0 is a complete Sebring-style sport exhaust for the air-cooled VW Beetle (1966–1973) and Karmann Ghia (1966–1974) with 1300, 1500 or 1600cc engines. It is a stainless steel 4-into-1 system with 38 mm J-pipes and two silencers, finished in heat-resistant paint, and it has no heater connection. EMPI ref VW-92760, JP ref 8120100500.
Part numbers: JP-8179-0 · EMPI ref VW-92760 · JP Group 8120100500 · UPC 707924525144.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 1966–1973 | VW Beetle 1300 / 1500 / 1600 | Per EMPI. Sebring style |
| 1966–1974 | VW Karmann Ghia 1300 / 1500 / 1600 | Per EMPI |
| 1974–1979 | VW Beetle, Super Beetle | Not on EMPI's list. Usually fits the Type 1 engine, but US emissions equipment and fuel injection need changes. Not confirmed |
| Any | Cars that need cabin heat from heater boxes | This system replaces the heater boxes and gives no heat |
| Any | VW Bus, Type 3, Type 4 engines | Does not fit |
Specifications
| Spec | Detail |
|---|---|
| Brand | JP Group (Denmark), distributed by EMPI |
| Part number | JP-8179-0 |
| Reference | VW-92760 (EMPI) |
| JP reference | 8120100500 |
| UPC | 707924525144 |
| Style | Sebring, 4-into-1 sport exhaust with J-pipes |
| Inlet pipes | 38 x 1.5 mm |
| Outlet pipes | 41 x 1.5 mm |
| Silencers | Two |
| Material / finish | Stainless steel with heat-resistant paint |
| Heating | None |
| Sold as | Each (complete system) |
| Shipping weight | approx. 30 lb, carton approx. 36 x 24 x 14 in (estimate) |
What's Included / Not Included
- Included: the Sebring header with J-pipes and twin silencers, per EMPI.
- Not included: cylinder-head exhaust gaskets, nuts, heater boxes or heat-riser block-offs. Some installs need pre-heat block-off plates on the intake manifold, so check your carburetor setup.
Why It Matters
The Sebring exhaust is the classic period hot-rod look for a Beetle or Ghia: a 4-into-1 header with twin low silencers and pipes at the rear. It frees up flow over the stock heater-box exhaust and saves weight. The trade-off is no cabin heat, because it replaces the heat exchangers. It suits dry-climate cars, show builds and street cars with a mildly built engine.
Installation Notes
- Use new port gaskets and check every exhaust stud before you start. Replace any that are loose or damaged.
- Fit all four port flanges loosely, then support the silencers and tighten from the heads outward.
- Single-carb cars rely on exhaust pre-heat for the intake manifold. Without it the car can ice up in cool weather. Plan for a dual-carb setup or a heat-riser solution.
- Re-tune the carburetor mixture after the change and check for leaks once the engine is hot.
Frequently Asked Questions
Does the JP-8179-0 fit my 1969 Beetle?
Yes. EMPI lists 1966–1973 Beetles with 1300–1600cc engines.
Will I still have heat?
No. This system has no heating and replaces the heater boxes.
What size are the pipes?
Inlet pipes are 38 x 1.5 mm and outlet pipes are 41 x 1.5 mm.
Is it stainless?
Yes. It is stainless steel with a heat-resistant paint finish.
Is this the same as VW-92760?
Yes. EMPI lists VW-92760 as the reference for JP-8179-0.
Do I need dual carburetors?
It is recommended. Without exhaust pre-heat, a single carb can ice up in cool, damp weather.
Is it new?
Yes. It is a new system.
Explore Related Categories
VW Beetle Parts VW Karmann Ghia Parts Exhaust Systems & Components
⚠ WARNING (California Proposition 65): This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov. Parts are legal for use on pre-pollution-controlled vehicles only.
