JP Group Shock Absorber Mount Bushing, Front Lower | VW Beetle 1966–1979, Karmann Ghia 1966–1974 & Thing 1973–1974 | OE 111 413 381 A (JP-8271-0)
Couldn't load pickup availability
JP Group Shock Absorber Mount Bushing, Front Lower | VW Beetle 1966–1979, Karmann Ghia 1966–1974 & Thing 1973–1974 | OE 111 413 381 A (JP-8271-0)
Short answer: JP Group JP-8271-0 is the rubber bushing for the lower eye of the front shock absorber. EMPI lists the VW Beetle 1966–1979, Karmann Ghia 1966–1974 and Thing 1973–1974, all front lower. It replaces OE 111 413 381 A (JP ref 8142150100). Sold each.
Part numbers: JP-8271-0 · OE 111 413 381 A · JP 8142150100 · UPC 707924526066
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 1966–1979 | VW Beetle, torsion-beam front | Front lower shock. EMPI fitment |
| 1966–1974 | VW Karmann Ghia | Front lower. EMPI fitment |
| 1973–1974 | VW Thing | Front lower. EMPI fitment |
| Other uses | Beetle 1967–79 rear sway bar, Bay Bus rear lower shock, Type 3 | Listed by other suppliers for the same OE number; not confirmed by EMPI |
| 1971–1979 | Super Beetle front strut | Does not fit |
Fitment comes from EMPI, the US distributor for JP Group, checked against the OE number. Where a row says "not confirmed", compare with your old part or ask us before you order.
Specifications
| Spec | Detail |
|---|---|
| Brand | JP Group (Denmark), distributed by EMPI |
| Part number | JP-8271-0 |
| OE / cross reference | 111 413 381 A |
| JP Group reference | 8142150100 |
| UPC | 707924526066 |
| Material | Rubber |
| Position | Front, lower shock eye |
| Sold as | Each |
| Shipping weight | About 0.25 lb (estimate) |
| Package size | 3 x 2 x 2 in (estimated) |
| Condition | New |
What's Included
- One shock mount bushing
Not Included
- Shock absorber
- Bolt and washers
Why It Matters
Worn shock bushings make the front end knock over bumps and let the shock move in its mount, so it does not damp as it should. Old rubber also cracks and falls out.
Replace the bushings any time you fit new shocks, unless the shocks come with them.
JP Group is a Danish maker of replacement parts for classic Volkswagens and Porsches. Its parts are sold under the JP Group, Dansk and Classic names, and EMPI is its US distributor. Washburn's Metal in Orange, California lists each JP part with its VW or Porsche OE number and its JP Group reference, so you can check it against your old part, your parts book or the stamp on the original before you order. If you are not sure whether this part fits your car, send us your year, model, chassis number and engine code and we will check it for you before it ships.
Installation Notes
- Support the car safely and remove the shock bolt.
- Press out the old bushing and clean the eye.
- A little rubber lube helps the new bushing go in.
- Tighten the bolt with the car at ride height so the rubber is not pre-loaded.
Use the torque values and procedures in a factory or Bentley service manual for your car.
Frequently Asked Questions
Does it fit my 1970 Beetle?
Yes. EMPI lists 1966–1979 Beetles, front lower.
Does it fit a Super Beetle?
Not the front strut. EMPI lists torsion-beam cars.
Does it fit my Thing?
Yes, the 1973–1974 Thing front lower.
Is this the same as 111 413 381 A?
Yes, EMPI lists that OE number.
How many do I need?
Usually one per shock eye; check your shocks.
Is it new?
Yes, new.
Explore Related Categories
Suspension & Components | VW Beetle Parts | VW Karmann Ghia Parts | VW Thing Parts | All VW Air-Cooled Parts
Volkswagen® and Porsche® model names are trademarks of their owners. Washburn's Metal is not affiliated with or endorsed by Volkswagen AG or Porsche AG. Part numbers are for reference only.
California Prop 65 Warning: This product can expose you to chemicals which are known to the State of California to cause cancer and reproductive harm. For more information, visit www.P65Warnings.ca.gov.
