JP Group Steering Damper Bushing, Rubber | VW Beetle, Bus, Karmann Ghia, Type 3 & Thing | OE 113 425 117 (JP-8285-0)
Couldn't load pickup availability
- Vendor JP Group
- SKU JP-8285-0
- Barcode 707924526202
-
Fits
- 1955-1974 VW Karmann Ghia
- 1966-1973 VW Type 3
- 1973-1974 VW Thing
- 1956-1979 VW Beetle
- 1971-1979 VW Super Beetle
- 1956-1979 VW Bus
Not sure it fits? Call the shop: (657) 438-7002.
JP Group Steering Damper Bushing, Rubber | VW Beetle, Bus, Karmann Ghia, Type 3 & Thing | OE 113 425 117 (JP-8285-0)
Short answer: The JP Group JP-8285-0 is the rubber bushing pressed into the eye of the steering damper (steering shock) on air-cooled VWs. EMPI lists it for the Karmann Ghia 1955–1974, Type 3 1966–1973, Thing 1973–1974, 411/412 and more; Beetle and Bus also use OE 113 425 117. JP Group ref. 8145050106. Sold each.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 1955–1974 | VW Karmann Ghia | Per EMPI |
| 1966–1973 | VW Type 3 Fastback & Squareback | Per EMPI |
| 1973–1974 | VW Thing | Per EMPI |
| 1971–1974 | VW 411 / 412 | Per EMPI |
| 1956–1979 | VW Beetle, Super Beetle & Bus | Same OE 113 425 117 per other catalogs; EMPI list is cut off — confirm |
Specifications
| Spec | Detail |
|---|---|
| Part number | JP-8285-0 |
| OE reference | 113 425 117 |
| JP Group reference | 8145050106 |
| UPC | 707924526202 |
| Material | Rubber |
| Position | Steering damper eye |
| Sold as | Each (2 per damper) |
| Brand | JP Group (Denmark), distributed in the US by EMPI |
| Condition | New |
| Shipping weight | approx. 0.1 lb (estimate) |
| Package size | 3 x 3 x 1 in (estimated) |
What's Included / Not Included
- Included: One rubber steering damper bushing.
- Not included: Steering damper, sleeve, bolts or nuts.
Why It Matters
The steering damper soaks up kickback from the road before it reaches the steering wheel. If its rubber bushings are cracked or gone, the damper rattles in its mounts, clunks over bumps and stops damping, so the car feels nervous and you get more shimmy. A new damper is often sold without bushings, and many old dampers are fine except for the rubber. A pair of these is a cheap way to cure the rattle.
Installation Notes
- Remove the damper and press the old bushing and its sleeve out of the eye.
- A little rubber-safe lube or soapy water helps the new bushing go in; avoid petroleum grease, which softens rubber.
- Reuse the inner sleeve if it is in good shape.
- Tighten the damper bolts to factory specification with the wheels pointed straight ahead.
- Replace both bushings in the damper at the same time.
- We do not publish torque values here; use the factory workshop manual for your vehicle.
Frequently Asked Questions
Does the JP-8285-0 fit my 1967 Beetle?
The Beetle uses the same OE 113 425 117 per other catalogs, but EMPI's fitment list is cut off. Compare your old bushing if unsure.
Does it fit my Karmann Ghia?
Yes. EMPI lists 1955–1974 Karmann Ghia.
How many do I need?
Two per damper, one at each end. It is sold each.
Is this the same as VW 113 425 117?
Yes. JP Group lists 113 425 117 as the OE reference.
Does it fit my Bus?
Bus steering dampers use 113 425 117 per other catalogs; confirm before ordering.
Is the damper included?
No, this is the bushing only.
Is it new?
Yes, it is a new JP Group part.
Explore Related Categories
Suspension & Components · VW Beetle Parts · VW Bus / Type 2 Parts · VW Karmann Ghia Parts
⚠ WARNING (California Proposition 65): This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov. Parts are legal for use on pre-pollution-controlled vehicles only.
The Tech Bench Everything we know about doing the work, in one place — written and filmed on our own bench in Orange, California, with the same parts we sell you.
Pick a bench below. Written install guides, free decoder tools, install videos, and the fitment lookup — each one lives on its own page so you're not scrolling past nine systems to find the one you're working on.
Four benches
Pick the one that matches the job in front of youInstall Guides
The full written library — procedures, torque specs, and the order of operations that keeps you from taking something apart twice. Organised by system.
55 guides8 systems5 published Open the library 02Decoders & Lookup
Chassis number, Beetle M-code, Bus M-code. Free tools for pinning down exactly what you have before you spend money on a part that doesn't fit it.
Chassis No.M-PlateFree Open the decoders 03Watch & Learn
Install videos and build footage from the shop floor. Watch the part go in — then grab the kit from the same page.
InstallsBuildsYouTube Watch the videos 04Fitment Lookup
Year and model in, the parts that actually fit out. The fastest way from "I think it's a '67" to the right part number in your cart.
Year / ModelAll parts Open the lookupLatest from the bench
5Most recently publishedGear Ratio Calculator
Type 1 and Bus transaxles. Ring and pinion, gear ratios, tire height and shift rpm in — road speed, rpm drop on every shift, and cruise rpm out.
Type 1 · BusOpen the calculator CH01 Guide 01 Best sellerSnap-Lock Delrin Shift Bushing
The 20-minute fix that turns a sloppy shifter crisp — and the whole shift-linkage explained.
#CH01Read the guide BY01 Guide 27Big Washburn Windows
Large engine-bay access panels for dual-carb and big-engine builds — reach the carbs without pulling the motor.
#BY01Read the guide PMO ReferencePMO Carburetors: Triple-Throat Induction
The complete reference on PMO triple-throat carburetors for air-cooled Porsche — sizing, jetting, and setup.
PMORead the guide CH64 ChassisFlat Out Custom Shortened Pan Halves
Building a shortened dune buggy or kit car? Engineered pan halves put a straight floor under it without sectioning a stock VW pan.
#CH64Read the guideFrom the shop blog
3Shorter reads from the shop floorBig Washburn Carb Windows: What They Are and Why We Cut Them
The reasoning behind cutting the rear inner fenders open, before you read the full install guide.
Read the post BlogTunnel Access Plates: Why We Cut a Hole in Your Pan on Purpose
Why the center tunnel gets an access plate, and what it saves you the next time the linkage needs attention.
Read the post BlogSome Hot VWs That Came Through the Shop This Spring
A look at the cars on the lifts in Orange, California, and the work that went into them.
Read the postCan't find your job here?
Call the shop. If the guide isn't written yet, we'll walk you through it on the phone — fitment, torque, sequence, what to buy and what to skip.
(657) 438-7002Shop line — parts, fitment and technical questions. Orange, California.
Free shipping on domestic (U.S.) orders over $250 — no code needed; oversize and freight items are excluded and ship at carrier rates. Otherwise, domestic shipping is calculated at checkout based on the size, weight, and destination of your order.
Orders are typically processed within 24–48 hours before they ship. Once your order ships, you'll get an email with tracking information.
Shipping outside the U.S.? Contact us at (657) 438-7002 before you order and we'll confirm rates and options for your destination.