JP Group Tail Light Assembly, E-Marked, Left or Right | VW Bus Bay Window 1972–1979 & Pickup | OE 211 945 145 G (JP-8601-0)
Couldn't load pickup availability
JP Group Tail Light Assembly, E-Marked — VW Bus 1972–1979 (JP-8601-0)
Short answer: JP Group JP-8601-0 is a complete E-marked tail light assembly for the late Bay Window VW Bus. EMPI lists it for the 1972–1979 Bus (Transporter) and the 1972–1974 Pickup, left or right. It replaces VW 211 945 145 G; JP ref. 8195301107. Sold each.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 1972–1979 | VW Bus (Bay Window) | Left or right, per EMPI |
| 1972–1974 | VW Bus Pickup | Per EMPI |
| 1968–1971 | VW Bus (early Bay) | Does not fit — small tail light |
| 1980–1991 | Vanagon | Does not fit |
Fitment comes from EMPI, the US distributor for JP Group. If your vehicle has been modified or parts have been swapped over the years, compare your old part or the OE number before ordering. Questions? Contact us with your year, model and chassis number and we will check it for you.
Specifications
| Spec | Detail |
|---|---|
| Part number | JP-8601-0 |
| VW OE reference | 211 945 145 G |
| JP Group reference | 8195301107 |
| UPC | 707924529364 |
| Approval | E-marked |
| Position | Rear, left or right |
| Sold as | Each |
| Brand | JP Group (Denmark), distributed in the US by EMPI |
| Condition | New |
| Shipping weight | Approx. 1.5 lb (estimate) |
| Package size | 12 x 6 x 5 in (estimate) |
What's Included
- One tail light assembly.
Not Included
- Bulbs, lamp-to-body seal or mounting nuts and washers.
Why It Matters
The big 1972–79 Bus tail lights carry the brake, tail and turn signals. Old housings crack, the bulb sockets corrode, and faded lenses make the brake light hard to see. Corroded sockets also cause flickering lights and fast hazard flashing. A new complete assembly fixes the lens, the reflector and the sockets in one go and makes the bus safer in traffic.
JP Group is a Danish supplier that has specialised in classic Volkswagen and Porsche parts for decades, and EMPI distributes the range in the USA. Their parts are made to match the original design, so they fit without the guesswork that comes with generic replacements.
Installation Notes
- Remove the lens screws and the bulbs, then the nuts inside the engine bay that hold the housing.
- Clean the body area and check the ground (earth) connection.
- Fit a new lamp-to-body seal so water and exhaust fumes stay out.
- Fit the new assembly, snug the nuts evenly and fit the bulbs. Test brake, tail and turn signals.
- Follow the factory workshop manual (Bentley or VW) for your model. If in doubt, have a qualified mechanic fit the part.
Frequently Asked Questions
Does it fit my 1976 Bus?
Yes. EMPI lists the 1972–1979 Bus.
Left or right?
Either side.
Does it fit a 1970 Bus?
No. 1968–71 buses use the small tail light.
Is it the same as VW 211 945 145 G?
Yes. EMPI lists 211 945 145 G as the OE reference.
Are bulbs included?
No.
Is it new?
Yes, new JP Group assembly.
Explore Related Categories
VW Bus / Type 2 Parts · Ignition & Electrical · All VW Air-Cooled Parts
⚠ WARNING (California Proposition 65): This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov. Parts are legal for use on pre-pollution-controlled vehicles only.
