JP Group Tail Pipe Mounting Kit (HJS) | VW Beetle & Super Beetle 1975–1979 Fuel Injected | OE 070 298 051 (JP-8205-0)
Couldn't load pickup availability
JP Group Tail Pipe Mounting Kit (HJS) | VW Beetle & Super Beetle 1975–1979 Fuel Injected | OE 070 298 051 (JP-8205-0)
Short answer: JP Group JP-8205-0 is the tail pipe mounting kit for the fuel-injected VW Beetle, listed by EMPI for 1975–1979 and described by JP for the 1303 (Super Beetle) body. It replaces kit 070 298 051 (JP ref 8121700613) and holds the tailpipe to the muffler. Sold as a kit.
Part numbers: JP-8205-0 · OE 070 298 051 · JP 8121700613 · UPC 707924525403
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 1975–1979 | VW Beetle, fuel-injected 1600 (US) | EMPI fitment |
| 1975–1979 | VW Super Beetle / 1303, fuel injected | JP lists "VW Classic 1303" |
| 1974 and earlier | Carbureted Beetle with twin tailpipes | Does not fit: uses tailpipe clamps, not this kit |
Fitment comes from EMPI, the US distributor for JP Group, checked against the OE number. Where a row says "not confirmed", compare with your old part or ask us before you order.
Specifications
| Spec | Detail |
|---|---|
| Brand | JP Group (Denmark), distributed by EMPI |
| Part number | JP-8205-0 |
| OE / cross reference | 070 298 051 |
| JP Group reference | 8121700613 |
| UPC | 707924525403 |
| Type | Tail pipe mounting / clamp kit, made by HJS per EMPI |
| Sold as | Kit |
| Shipping weight | About 1 lb (estimate) |
| Package size | 6 x 4 x 2 in (estimated) |
| Condition | New |
What's Included
- Tail pipe mounting kit as supplied by EMPI / JP Group
Not Included
- Muffler, catalytic converter or tailpipe
- Exhaust gaskets
Why It Matters
On the fuel-injected Beetle the single tailpipe is held by a clamp and bracket kit. When it rusts through, the pipe rattles, drops, or leaks exhaust under the rear apron. Fresh hardware lets you hang a new muffler or tailpipe properly and stops the rattle.
Old clamps are usually rusted solid and get cut off during exhaust work, so it makes sense to have this kit on hand before the job starts.
JP Group is a Danish maker of replacement parts for classic Volkswagens and Porsches. Its parts are sold under the JP Group, Dansk and Classic names, and EMPI is its US distributor. Washburn's Metal in Orange, California lists each JP part with its VW or Porsche OE number and its JP Group reference, so you can check it against your old part, your parts book or the stamp on the original before you order. If you are not sure whether this part fits your car, send us your year, model, chassis number and engine code and we will check it for you before it ships.
Installation Notes
- Soak old fasteners with penetrating oil; cut seized clamps instead of twisting the pipe.
- Clean the pipe where the clamp sits so it seals.
- Align the tailpipe so it clears the apron and bumper, then tighten.
- Check for rattles and leaks with the engine running.
Use the torque values and procedures in a factory or Bentley service manual for your car.
Frequently Asked Questions
Does it fit my 1977 Beetle?
Yes, if it is the fuel-injected US car. EMPI lists 1975–1979 Beetles.
Does it fit a carbureted 1972 Beetle?
No. Carbureted twin-tailpipe cars use different clamps.
Is this the same as 070 298 051?
Yes, EMPI lists 070 298 051 as the OE reference.
What is in the kit?
The mounting hardware EMPI supplies with JP-8205-0. Compare it with your old parts before you start.
What else do I need?
New exhaust gaskets if you are taking the muffler off.
Is it new?
Yes, new.
Explore Related Categories
Exhaust Systems & Components | VW Beetle Parts | VW Super Beetle Parts | All VW Air-Cooled Parts
Volkswagen® and Porsche® model names are trademarks of their owners. Washburn's Metal is not affiliated with or endorsed by Volkswagen AG or Porsche AG. Part numbers are for reference only.
California Prop 65 Warning: This product can expose you to chemicals which are known to the State of California to cause cancer and reproductive harm. For more information, visit www.P65Warnings.ca.gov.
