JP Group Tie Rod Assembly with Ends, Left or Right | VW Super Beetle 1975–1979 | OE 133 419 804 A (JP-8281-0)
Couldn't load pickup availability
JP Group Tie Rod Assembly with Ends, Left or Right | VW Super Beetle 1975–1979 | OE 133 419 804 A (JP-8281-0)
Short answer: The JP Group JP-8281-0 is a complete outer tie rod assembly with ends for the 1975–1979 VW Super Beetle with rack-and-pinion steering. One part fits either the left or right side. It replaces VW OE 133 419 804 A (JP Group ref. 8144400700). Sold each; order two to do both sides.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 1975–1979 | VW Super Beetle sedan & convertible (rack-and-pinion) | Front left or right; EMPI lists through 1980 convertible |
| 1971–1974 | VW Super Beetle — does not fit | Steering box cars use different tie rods |
| 1949–1979 | Standard Beetle — does not fit | Different steering linkage |
Specifications
| Spec | Detail |
|---|---|
| Part number | JP-8281-0 |
| OE reference | 133 419 804 A |
| JP Group reference | 8144400700 |
| UPC | 707924526165 |
| Position | Front, left or right |
| Type | Tie rod with ends, assembled |
| Sold as | Each |
| Brand | JP Group (Denmark), distributed in the US by EMPI |
| Condition | New |
| Shipping weight | approx. 3 lb (estimate) |
| Package size | 18 x 4 x 3 in (estimated) |
What's Included / Not Included
- Included: One tie rod assembly with both ends.
- Not included: Steering rack, rack boots, mounting nuts or cotter pins (reuse or replace per manual).
Why It Matters
Worn tie rod ends cause play in the steering, wandering, uneven tire wear and a clunk over bumps. Because the late Super Beetle's tie rods bolt to the rack and to the steering arms, a worn end is usually replaced as a full assembly. Torn rubber boots let water in, and the ball joint wears fast after that. Replacing both sides at once keeps the steering feel even and makes the alignment easier to set. The same OE number covers left and right, so a pair of JP-8281-0 does the whole car.
Installation Notes
- Measure or count threads on the old tie rod before removal so the toe setting starts close.
- Use a proper tie rod end puller; hammering the steering arm can damage it.
- Fit new self-locking nuts or cotter pins as the workshop manual specifies.
- Tighten fasteners to factory specification.
- Have the front toe set by an alignment shop after fitting.
- We do not publish torque values here; use the factory workshop manual for your vehicle.
Frequently Asked Questions
Does the JP-8281-0 fit my 1977 Super Beetle?
Yes. It is listed for the 1975–1979 Super Beetle with rack-and-pinion steering.
Left or right?
Either. The same part fits both sides.
Will it fit my 1973 Super Beetle?
No. 1971–74 Super Beetles have a steering box and different tie rods.
Is this the same as VW 133 419 804 A?
Yes. JP Group lists 133 419 804 A as the OE reference.
How many do I need?
Two for both sides. It is sold each.
Do I need an alignment?
Yes. Set the toe after replacing tie rods.
Is it new?
Yes, it is a new JP Group part. We also carry EMPI's adjustable 98-4538-B set for the same cars.
Explore Related Categories
Suspension & Components · VW Super Beetle Parts
⚠ WARNING (California Proposition 65): This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov. Parts are legal for use on pre-pollution-controlled vehicles only.
