JP Group Torsion Arm Stop (Rubber Bump Stop), Front Upper | VW Bus 1968–1979 | OE 211 401 253 (JP-8272-0)
Couldn't load pickup availability
JP Group Torsion Arm Stop (Rubber Bump Stop), Front Upper | VW Bus 1968–1979 | OE 211 401 253 (JP-8272-0)
Short answer: JP Group JP-8272-0 is the rubber stop for the upper front torsion arm on the 1968–1979 VW Bus. It cushions the trailing arm at the end of its travel and fits left or right. It replaces OE 211 401 253 (JP ref 8142250502). EMPI does not state the pack quantity, so we list it per piece.
Part numbers: JP-8272-0 · OE 211 401 253 · JP 8142250502 · UPC 707924526073
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 1968–1979 | VW Bus (Bay Window) | Front upper, left or right. EMPI fitment |
| 1950–1967 | Split Bus | Does not fit |
| 1980–1991 | Vanagon | Does not fit |
Fitment comes from EMPI, the US distributor for JP Group, checked against the OE number. Where a row says "not confirmed", compare with your old part or ask us before you order.
Specifications
| Spec | Detail |
|---|---|
| Brand | JP Group (Denmark), distributed by EMPI |
| Part number | JP-8272-0 |
| OE / cross reference | 211 401 253 |
| JP Group reference | 8142250502 |
| UPC | 707924526073 |
| Material | Rubber |
| Position | Front upper torsion arm, left or right |
| Sold as | Each (pack quantity not stated by EMPI) |
| Shipping weight | About 0.5 lb (estimate) |
| Package size | 4 x 3 x 2 in (estimated) |
| Condition | New |
What's Included
- One torsion arm stop (rubber)
Not Included
- Lower stop
- Mounting hardware
Why It Matters
When the rubber stop is gone, the trailing arm hits metal to metal over big bumps. That is loud, it can damage the arm or the beam, and it makes the van feel harsh. Lowered Buses wear these stops out quickly.
A new stop is cheap and brings back a quiet front end.
JP Group is a Danish maker of replacement parts for classic Volkswagens and Porsches. Its parts are sold under the JP Group, Dansk and Classic names, and EMPI is its US distributor. Washburn's Metal in Orange, California lists each JP part with its VW or Porsche OE number and its JP Group reference, so you can check it against your old part, your parts book or the stamp on the original before you order. If you are not sure whether this part fits your car, send us your year, model, chassis number and engine code and we will check it for you before it ships.
Installation Notes
- Support the van safely and take the weight off the front.
- Remove the old rubber and clean the seat.
- Fit the new stop firmly.
- Check that the arm meets the stop squarely at full bump.
Use the torque values and procedures in a factory or Bentley service manual for your car.
Frequently Asked Questions
Does it fit my 1977 Bus?
Yes. EMPI lists 1968–1979.
Left or right?
Either side.
Upper or lower?
This is the upper stop.
Is this the same as 211 401 253?
Yes, EMPI lists that OE number.
How many do I need?
Usually one per side; check your van.
Is it new?
Yes, new.
Explore Related Categories
Suspension & Components | VW Bus / Type 2 Parts | All VW Air-Cooled Parts
Volkswagen® and Porsche® model names are trademarks of their owners. Washburn's Metal is not affiliated with or endorsed by Volkswagen AG or Porsche AG. Part numbers are for reference only.
California Prop 65 Warning: This product can expose you to chemicals which are known to the State of California to cause cancer and reproductive harm. For more information, visit www.P65Warnings.ca.gov.
