JP Group Front Window Regulator, Left or Right | VW Beetle & Super Beetle 1975–1979 Sedan | OE 111 837 501 K / 502 K (JP-8718-0 / JP-8719-0)
Couldn't load pickup availability
JP Group Front Window Regulator, Left or Right — VW Beetle & Super Beetle 1975–1979 (JP-8718-0 / JP-8719-0)
Short answer: JP-8718-0 (left) and JP-8719-0 (right) are new window regulators, the crank-driven mechanism inside the door that raises and lowers the glass, for the 1975–1979 VW Beetle and Super Beetle sedan. They replace VW OE 111 837 501 K (left) and 111 837 502 K (right), JP Group refs 8188100570 / 8188100580. FCP Euro sells the same part under the Dansk name. Sold each.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 1975–1979 | VW Beetle sedan (incl. sunroof) | Front door; left JP-8718-0, right JP-8719-0, per EMPI |
| 1975–1980 | VW Super Beetle sedan | Per EMPI (Super Beetle sedan production ended 1975; La Grande / later years confirm) |
| 1968–1974 | Beetle & Super Beetle | Does not fit: the 1968–74 regulator (111 837 501 H) looks similar but has different mounting holes |
| 1967–1979 | Beetle Convertible | Does not fit: convertibles use a different regulator |
Specifications
| Spec | Left | Right |
|---|---|---|
| Part number | JP-8718-0 | JP-8719-0 |
| OE reference | 111 837 501 K | 111 837 502 K |
| JP Group reference | 8188100570 | 8188100580 |
| UPC | 707924541656 | 707924541663 |
| Weight (EMPI) | 1.72 lb | 1.94 lb |
| Package (EMPI) | 26 x 26 x 4 in | |
| Operation | Manual (crank) | |
| Sold as | Each | |
What's Included
- One window regulator for the side you choose
Not Included
- Window crank handle and trim
- Lift channel, glass, felt channels and scrapers
- Door panel clips
Why It Matters
Beetle regulators wear at the gear teeth and the lift arm pivots. Signs are a crank that slips or spins, a window that drops into the door, glass that cocks and binds, or a crunching noise as you wind. A failed regulator leaves the car open to weather and theft. Before you buy, look at the bottom of your old regulator frame: the 1975-and-later regulator has a cranked (bent) extension at the bottom of the frame that suits the late door, while 1968–74 units do not.
Installation Notes
- Remove the crank, armrest, door panel and vapor barrier.
- Lower the glass to reach the lift channel bolts and support the glass while you separate it.
- Compare the new and old regulators side by side before installing.
- Grease the gears and pivots with white lithium grease, and replace hard felt channels and scrapers while the door is open.
- Run the window up and down several times before refitting the panel.
Frequently Asked Questions
Does it fit my 1977 Beetle?
Yes, 1975–1979 Beetle sedans use this regulator.
Does it fit my 1973 Super Beetle?
No. 1968–1974 cars use the earlier regulator with different mounting holes.
Left or right — how do I tell?
Left is the US driver door (JP-8718-0, OE 111 837 501 K). Right is the passenger door (JP-8719-0, OE 111 837 502 K).
Is this the same as OE 111 837 501 K?
Yes. JP Group cross-references JP-8718-0 to 111 837 501 K and JP-8719-0 to 111 837 502 K.
Does it fit a convertible?
No.
Is it new?
Yes, a new JP Group (Dansk) part.
Explore Related Categories
Body Panels & Sheet Metal VW Beetle Parts VW Super Beetle Parts
California Prop 65 Warning: This product can expose you to chemicals including lead and/or lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov. Legal for use on pre-pollution-controlled vehicles only.
