JP Group Wiper Arm Wind Deflectors, Polished Stainless, Pair | Porsche 356 1950–1965, VW Super Beetle & Thing (JP-8621-0)
Couldn't load pickup availability
JP Group Wiper Arm Wind Deflectors, Polished Stainless, Pair | Porsche 356 1950–1965, VW Super Beetle & Thing (JP-8621-0)
Short answer: The JP Group JP-8621-0 is a pair of polished stainless steel wind deflectors (spoilers) that clip onto the front wiper arms. They press the blade onto the glass at speed. EMPI lists them for the Porsche 356, 356A, 356B and 356C (1950–1965), the 1971–1980 VW Super Beetle and the 1973–1974 Thing. JP Group ref. 8198350210. Set of 2.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 1950–1955 | Porsche 356 (pre-A) | Front, per EMPI |
| 1955–1959 | Porsche 356A | Front, per EMPI |
| 1960–1963 | Porsche 356B | Front, per EMPI |
| 1964–1965 | Porsche 356C | Front, per EMPI |
| 1971–1980 | VW Super Beetle | Front, per EMPI |
| 1973–1974 | VW Thing | Front, per EMPI (EMPI list is cut off after this line) |
| Any | Cars with blade-integrated spoilers — not needed | Check your arm width |
These deflectors clip onto the flat section of the wiper arm. EMPI's fitment list is cut off on its website, so other cars with a similar arm may also take them. Check that your arm is the flat, narrow style.
Specifications
| Spec | Detail |
|---|---|
| Part number | JP-8621-0 |
| JP Group reference | 8198350210 |
| UPC | 707924529562 |
| Material | Stainless steel, polished |
| Position | Front wiper arms |
| Sold as | Set of 2 |
| Brand | JP Group (Denmark), distributed in the US by EMPI |
| Condition | New |
| Shipping weight | 0.5 lb (estimate) |
| Package size | 8 x 4 x 1 in (estimate) |
What's Included
- Two polished stainless wiper arm wind deflectors.
Not Included
- Wiper arms
- Wiper blades
- Wiper motor or linkage
Why It Matters
At highway speed the air flowing up the windshield lifts the wiper blade off the glass. The blade chatters, leaves streaks or misses the area in front of the driver. A wind deflector on the arm turns that airflow into downforce and keeps the blade on the glass.
Deflectors were a common period accessory on 356s and are a popular finishing touch on restorations. Polished stainless matches chrome or silver arms and will not rust.
Installation Notes
- Clean the wiper arm where the deflector sits.
- Clip or slide the deflector onto the flat part of the arm, with the curved face toward the oncoming air.
- Make sure it does not touch the glass or the other arm when parked.
- Run the wipers on the slowest speed first to check clearance through the full sweep.
- Do not over-bend the clips. Bending them too far can mark the arm finish.
- We do not publish torque values here; use the factory workshop manual (Bentley) for your vehicle.
Frequently Asked Questions
Do these fit my 1958 356A?
Yes. EMPI lists the 356A 1955–1959 front arms.
Do they fit a 1974 Super Beetle?
Yes. EMPI lists the 1971–1980 Super Beetle front.
Is it one or two pieces?
It is a set of two, one for each front arm.
Are wiper arms included?
No. These clip onto your existing arms.
Will they fit my 911?
They are not listed for the 911. They may fit similar flat arms; check the width before you fit them.
Is this stainless or chrome-plated?
Polished stainless steel, per EMPI.
Is it new?
Yes. New, from JP Group of Denmark, sold in the US through EMPI.
Explore Related Categories
Porsche 356 Parts · VW Super Beetle Parts · VW Thing Parts
California Prop 65 Warning: This product can expose you to chemicals including lead and/or lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov. Legal for use on pre-pollution-controlled vehicles only.
