PMO Short Ball Pin | PMO Carburetors, Air-Cooled Porsche 911 / 930 1965–1989 | Genuine PMO (PM-O129-5)
Couldn't load pickup availability
- Vendor PMO
- SKU PM-O129-5
- Barcode 707924556568
-
Fits
- 1965-1989 Porsche 911 (PMO carburetors)
- 1975-1989 Porsche 930 (PMO carburetors)
Not sure it fits? Call the shop: (657) 438-7002.
PMO Short Ball Pin for PMO Carburetors — Air-Cooled Porsche 911 (PM-O129-5)
Short answer: The PMO Short Ball Pin (PM-O129-5) is a genuine PMO carburetor service part listed in PMO's accelerator pump parts group (PM-O129 series). It fits PMO triple-barrel carburetors as used on the air-cooled 1965–1989 Porsche 911 and 930. Sold each.
Part numbers: PMO PM-O129-5 · UPC 707924556568
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 1965–1989 | Porsche 911 / 930 (air-cooled flat-six) running PMO carburetors | PMO 40, 46 and 50 mm carburetors |
| 1965–1989 | Porsche 911 with original Weber IDA / IDS or Solex carburetors | Not confirmed; PMO parts are made for PMO bodies |
| 1989–1998 | 964 / 993 converted to PMO carburetors | Fits the PMO carburetor, not the car; check your carb |
| Any | Porsche 912, 914 four-cylinder, VW | Not applicable unless running PMO carburetors |
This part fits the PMO carburetor, not a particular car. If your 911 runs a set of PMO carbs, it fits. Not sure what you have? PMO bodies carry the PMO name cast or machined into them; send us a photo and we will check.
Specifications
| Spec | Detail |
|---|---|
| Manufacturer | PMO (Performance Machined Originals), US distributor EMPI |
| Part number | PM-O129-5 |
| UPC | 707924556568 |
| Type | Ball pin, short |
| Parts group | PMO accelerator pump (PM-O129 series) |
| Fits | PMO 40 / 46 / 50 mm carburetors |
| Shipping weight | Approx. 0.1 lb (estimate) |
| Box | Approx. 4 x 4 x 1 in (estimate) |
| Condition | New |
What's Included
- One short ball pin
Not Included
- Accelerator pump diaphragm assembly PM-O129-0
- Linkage rods and clips
Why It Matters
Ball pins are the pivot points in carburetor linkage. When the ball wears oval or the pin bends, the linkage gets sloppy: the pump stroke shortens, you feel a stumble off idle, and throttle response gets vague. A new pin takes the slop out.
PMO (Performance Machined Originals) builds billet triple-barrel carburetors in the US for the air-cooled Porsche 911 flat-six, in 40, 46 and 50 mm sizes, and supplies every small part as a service item. EMPI distributes PMO. Washburn's Metal in Orange, California lists PMO small parts one by one so you can buy the single piece you lost or damaged instead of a whole kit.
Installation Notes
- Note which hole the old pin was in before removing it.
- Thread the pin in by hand, then snug it; do not over-tighten.
- Put a drop of light oil on the ball and check the linkage moves freely through its full travel.
- Work on a cold engine with the fuel pump off and a fire extinguisher close by.
- Clean the area around the part before opening the carburetor so dirt cannot fall into the float bowl or throats.
- After any work, check the throttle opens fully and closes with no sticking, and check for fuel leaks before starting.
- Re-balance the carburetors with a synchrometer if you disturbed any linkage or air cleaner parts.
Frequently Asked Questions
Does the Short Ball Pin fit my 911?
It fits the air-cooled Porsche 911 or 930 when the car runs PMO carburetors. It is a PMO carb part, so the carb matters more than the year.
Will it fit original Weber carburetors?
Not confirmed. PMO parts are made for PMO bodies; some are shared with Weber, but check before you order.
Is it genuine PMO?
Yes, PMO part PM-O129-5, distributed in the US by EMPI.
Is it new?
Yes, new genuine PMO.
Is this short or long?
Short. Compare with your old pin to be sure you have the right length.
Where does it go?
PMO lists it with the accelerator pump parts; it is a pivot for the linkage.
What else do I need?
Check the matching socket or rod end for wear too.
Explore Related Categories
PMO Carburetors & Induction | Porsche Carburetion & Induction | Porsche 911 / 912 Parts | Fuel & Intake Components
Porsche® and Volkswagen® model designations are trademarks of their owners. Washburn's Metal is not affiliated with or endorsed by Porsche or Volkswagen. Part numbers are for reference only.
⚠ California Proposition 65 Warning: This product can expose you to chemicals including lead, known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
The Tech Bench Everything we know about doing the work, in one place — written and filmed on our own bench in Orange, California, with the same parts we sell you.
Pick a bench below. Written install guides, free decoder tools, install videos, and the fitment lookup — each one lives on its own page so you're not scrolling past nine systems to find the one you're working on.
Four benches
Pick the one that matches the job in front of youInstall Guides
The full written library — procedures, torque specs, and the order of operations that keeps you from taking something apart twice. Organised by system.
55 guides8 systems5 published Open the library 02Decoders & Lookup
Chassis number, Beetle M-code, Bus M-code. Free tools for pinning down exactly what you have before you spend money on a part that doesn't fit it.
Chassis No.M-PlateFree Open the decoders 03Watch & Learn
Install videos and build footage from the shop floor. Watch the part go in — then grab the kit from the same page.
InstallsBuildsYouTube Watch the videos 04Fitment Lookup
Year and model in, the parts that actually fit out. The fastest way from "I think it's a '67" to the right part number in your cart.
Year / ModelAll parts Open the lookupLatest from the bench
5Most recently publishedGear Ratio Calculator
Type 1 and Bus transaxles. Ring and pinion, gear ratios, tire height and shift rpm in — road speed, rpm drop on every shift, and cruise rpm out.
Type 1 · BusOpen the calculator CH01 Guide 01 Best sellerSnap-Lock Delrin Shift Bushing
The 20-minute fix that turns a sloppy shifter crisp — and the whole shift-linkage explained.
#CH01Read the guide BY01 Guide 27Big Washburn Windows
Large engine-bay access panels for dual-carb and big-engine builds — reach the carbs without pulling the motor.
#BY01Read the guide PMO ReferencePMO Carburetors: Triple-Throat Induction
The complete reference on PMO triple-throat carburetors for air-cooled Porsche — sizing, jetting, and setup.
PMORead the guide CH64 ChassisFlat Out Custom Shortened Pan Halves
Building a shortened dune buggy or kit car? Engineered pan halves put a straight floor under it without sectioning a stock VW pan.
#CH64Read the guideFrom the shop blog
3Shorter reads from the shop floorBig Washburn Carb Windows: What They Are and Why We Cut Them
The reasoning behind cutting the rear inner fenders open, before you read the full install guide.
Read the post BlogTunnel Access Plates: Why We Cut a Hole in Your Pan on Purpose
Why the center tunnel gets an access plate, and what it saves you the next time the linkage needs attention.
Read the post BlogSome Hot VWs That Came Through the Shop This Spring
A look at the cars on the lifts in Orange, California, and the work that went into them.
Read the postCan't find your job here?
Call the shop. If the guide isn't written yet, we'll walk you through it on the phone — fitment, torque, sequence, what to buy and what to skip.
(657) 438-7002Shop line — parts, fitment and technical questions. Orange, California.
Free shipping on domestic (U.S.) orders over $250 — no code needed; oversize and freight items are excluded and ship at carrier rates. Otherwise, domestic shipping is calculated at checkout based on the size, weight, and destination of your order.
Orders are typically processed within 24–48 hours before they ship. Once your order ships, you'll get an email with tracking information.
Shipping outside the U.S.? Contact us at (657) 438-7002 before you order and we'll confirm rates and options for your destination.