Rocker Panel End Cap, Black, Left Front / Right Rear — Porsche 911 / 930 (JP-2324-0)
Couldn't load pickup availability
The JP-2324-0 is one black rocker panel end cap for the left front and right rear corners, for 1974–1989 Porsche 911 and 930 Turbo. It is a JP Group (Dansk) weld-in steel reproduction, stamped in Denmark to the factory profile.
What is the JP-2324-0?
It is one black rocker panel end cap for the left front and right rear corners. JP Group of Denmark stamps it in steel to the original factory profile, and it is sold in the US under the Dansk name. US shops also list this part as a rocker trim end cap, sill trim end piece — all the same panel.
Does the JP-2324-0 fit my Porsche?
| Years | Models |
|---|---|
| 1974–1989 | Porsche 911, 911SC and Carrera 3.2; 1975–1989 Porsche 911 Turbo (930) |
Pairs with JP-2323-0 (right front / left rear) on the opposite side.
These caps are handed diagonally. This one serves the left front and right rear corners; JP-2323-0 serves the right front and left rear. A full car needs two of each. Catalogues disagree on which suffix is which hand, so go by the diagonal described here. 1968–1973 long-hood cars use a different wide-trim cap — ask us first.
Why this panel fails
The end caps finish the rocker trim at the arches. They crack and fade, and replacing all four is a cheap way to sharpen up a tired impact-bumper car.
What this is not
This is not the rocker trim itself.
Part numbers and cross-references
- Our part number: JP-2324-0
- Porsche / OE interchange: PCG.559.941.04 / PCG.559.942.04
- Brand: JP Group (sold as Dansk in the United States)
- Country of origin: Denmark
- Material and finish: stamped steel, supplied ready for weld-in fitment, seam sealer, epoxy primer and paint
- Shipping weight: 0.2 lb
How is it installed?
This is a weld-in restoration panel. It is cut in and welded by a qualified body shop or an experienced fabricator using standard MIG or spot-welding technique. Trial-fit and clamp before you cut the original out — on a rusty car the surrounding structure has usually moved, and the new panel is your reference for putting it back where the factory had it.
Common questions
Is the JP-2324-0 genuine Porsche or a reproduction?
It is an aftermarket reproduction made by JP Group of Denmark, built to match the factory panel's fit and profile. It is not a genuine Porsche OEM part, and it is priced accordingly.
Does it come primed or painted?
It ships bare or lightly protected depending on the batch, ready for you to prep, seam seal and paint. Plan on your own primer and paint.
Do I need one or two?
This part is handed. You need one per side, and JP-2323-0 (right front / left rear) covers the other side.
How do I know it is the right panel for my chassis?
Send us your VIN or model year before you order. We would rather answer a question than process a return on a panel that has already been cut.
⚠ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.