JP Group Stainless Sebring-Style Sport Muffler, Dual Outlets | VW Beetle 1966–1979 & Karmann Ghia 1965–1974 1300–1600 | With Heater (JP-8200-0)
Couldn't load pickup availability
JP Group Stainless Sebring-Style Sport Muffler, Dual Outlets | VW Beetle 1966–1979 & Karmann Ghia 1965–1974 1300–1600 | With Heater (JP-8200-0)
Short answer: JP Group JP-8200-0 is a stainless steel Sebring-style sport muffler with twin outlets for the 1300–1600cc air-cooled VW. EMPI lists it for the 1966–1979 Beetle and 1965–1974 Karmann Ghia with heater boxes. JP Group reference 8120802100; EMPI cross-reference VW-35171S. Sold each.
Part numbers: JP-8200-0 · Ref VW-35171S · JP 8120802100 · UPC 707924525359
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 1966–1979 | VW Beetle & Super Beetle, 1300 / 1500 / 1600 Type 1 engine with heat exchangers | EMPI fitment (rear, stainless, with heater) |
| 1965–1974 | VW Karmann Ghia, 1300 / 1500 / 1600 with heat exchangers | EMPI fitment |
| 1975–1979 | Fuel-injected US Beetle / Super Beetle | Not confirmed: FI cars used a different stock exhaust layout; check your heat exchangers and tailpipe cutouts |
| Any | Bus with Type 4 engine (1972–1979), Type 3, 1200cc / 36hp | Does not fit |
Fitment comes from EMPI, the US distributor for JP Group, checked against the OE number. Where a row says "not confirmed", compare with your old part or ask us before you order.
Specifications
| Spec | Detail |
|---|---|
| Brand | JP Group (Denmark), distributed by EMPI |
| Part number | JP-8200-0 |
| OE / cross reference | VW-35171S |
| JP Group reference | 8120802100 |
| UPC | 707924525359 |
| Material | Stainless steel |
| Style | Sebring-style sport muffler, dual outlets |
| Use | With stock-style heat exchangers (heater) |
| Sold as | Each |
| Shipping weight | About 20 lb (estimate) |
| Package size | 36 x 16 x 10 in (estimated) |
| Condition | New |
What's Included
- One stainless Sebring-style sport muffler with twin outlets (as pictured by EMPI)
Not Included
- Heat exchangers (heater boxes)
- Exhaust gaskets, clamps and nuts
- Tailpipe hangers or brackets unless shown
Why It Matters
The stock muffler on a Beetle rusts out from the inside, then cracks at the seams and the heater riser. A blown muffler is loud, lets fumes reach the cabin through the heater, and robs power because the engine no longer sees the back-pressure it was tuned for.
A stainless Sebring-style muffler gives the classic twin-outlet look and a deeper note than stock, and stainless steel lasts many times longer than a mild-steel box. This JP Group version is meant to be used with heat exchangers, so you keep a working heater, which matters on a car that is driven in winter.
JP Group is a Danish maker of replacement parts for classic Volkswagens and Porsches. Its parts are sold under the JP Group, Dansk and Classic names, and EMPI is its US distributor. Washburn's Metal in Orange, California lists each JP part with its VW or Porsche OE number and its JP Group reference, so you can check it against your old part, your parts book or the stamp on the original before you order. If you are not sure whether this part fits your car, send us your year, model, chassis number and engine code and we will check it for you before it ships.
Installation Notes
- Soak all exhaust nuts with penetrating oil the night before. Studs in the heads snap easily.
- Fit new gaskets at every joint. Leave all nuts finger tight until the muffler is aligned, then tighten evenly.
- Check clearance to the rear apron and engine tin; lowered cars may need the apron trimmed.
- Run the engine and check for leaks at each flange before refitting tin.
- Stainless steel changes colour with heat. That is normal.
Use the torque values and procedures in a factory or Bentley service manual for your car.
Frequently Asked Questions
Does it fit my 1971 Beetle?
Yes. EMPI lists the 1966–1979 Beetle with a 1300–1600 Type 1 engine and heat exchangers.
Will I keep my heater?
Yes. EMPI lists it for cars with heater boxes, so it is used with stock-style heat exchangers.
Is it stainless steel?
Yes, EMPI lists it as stainless steel.
Does it fit a fuel-injected 1975–1979 Beetle?
Not confirmed. FI cars use a different exhaust layout. Send us your setup before ordering.
Will it fit my Bus?
No. It is for Type 1 engines in the Beetle and Karmann Ghia, not Type 4 Bus engines.
What else do I need?
A full set of exhaust gaskets, new nuts, and clamps for the tailpipes if yours are worn.
Is it new?
Yes, new JP Group.
Explore Related Categories
VW Heater Boxes & Heat Exchangers | Exhaust Systems & Components | VW Beetle Parts | VW Super Beetle Parts | VW Karmann Ghia Parts | All VW Air-Cooled Parts
Volkswagen® and Porsche® model names are trademarks of their owners. Washburn's Metal is not affiliated with or endorsed by Volkswagen AG or Porsche AG. Part numbers are for reference only.
California Prop 65 Warning: This product can expose you to chemicals which are known to the State of California to cause cancer and reproductive harm. For more information, visit www.P65Warnings.ca.gov.
