Door Shell, Left — Complete Stamped Steel | Porsche 911 SC/Carrera 3.2 & 930 1978-1989 (JP-1886-0)
Couldn't load pickup availability
Door Shell, Left — Porsche 911 & 930 (JP-1886-0)
Short answer: This is JP Group JP-1886-0, a new complete left-side door shell for the 1978–1983 Porsche 911 SC, 1984–1989 Carrera 3.2 and 1978–1989 930 Turbo, as listed in the JP Group/Dansk catalog. It is stamped steel built to the factory profile, supplied bare for primer, seam sealer and paint, and it hangs on the door hinges. Made in Denmark; JP reference 1680700570; sold as one left-side steel door shell.
Part numbers: JP Group JP-1886-0 · JP reference 1680700570
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 1978–1983 | Porsche 911 SC (3.0) | Left side — listed in the JP Group/Dansk catalog |
| 1984–1989 | Porsche 911 Carrera 3.2 | Left side — listed in the JP Group/Dansk catalog |
| 1978–1989 | Porsche 930 Turbo (3.3) | Left side — listed in the JP Group/Dansk catalog |
| 1975–1977 | Porsche 930 Turbo (3.0) | Not confirmed — ask us with your chassis number |
| 1974–1977 | Porsche 911 (non-Turbo) | Not confirmed — ask us with your chassis number |
| 1965–1973 | Porsche 911 / 912 | Does not fit — early doors differ; 1965–1968 left door is JP-1883-0 |
Always confirm fitment against your car's chassis number and existing door before ordering — Porsche doors changed with the body generations.
Specifications
| Spec | Detail |
|---|---|
| Manufacturer | JP Group (Denmark) |
| Part number | JP-1886-0 |
| Reference / cross-reference | 1680700570 |
| Side | Left (driver side on a left-hand-drive car) |
| Material | Stamped steel |
| Finish | Bare steel |
| Installation | Hangs on the door hinges (not a weld-in panel); expect fitting and gap adjustment |
| Condition | New, aftermarket reproduction (not genuine Porsche) |
| Country of origin | Denmark |
| Shipping size | 52 x 42 x 12 in, 48 lb |
What's Included
- One left-side steel door shell
Not Included
- Glass, window regulator, latch, handle and trim — transfer or source these separately
Why It Matters
A rotted or bent door is one of the hardest pieces of G-body 911 sheet metal to find used in good shape, so a new steel shell lets you start your door work on clean metal instead of patching someone else's rust.
Installation Notes
Expect body-shop fitting and gap adjustment when the door is hung.
It ships in bare steel, ready for epoxy primer, seam sealer and paint.
Frequently Asked Questions
Which Porsche does the JP-1886-0 left door shell fit?
The JP Group/Dansk catalog lists it for the 1978–1983 Porsche 911 SC, 1984–1989 Carrera 3.2 and 1978–1989 930 Turbo, left side. Send us your chassis number before ordering if your car is outside those years.
Is this a weld-in panel?
No. It is a complete door shell that hangs on the door hinges. Expect body-shop fitting and gap adjustment when it is hung.
Is the JP-1886-0 the left or right side?
Left side only (driver side on a left-hand-drive car). Doors are handed, so order the side you are replacing.
What else will I need?
This listing is the steel door shell. Plan to transfer or source the glass, window regulator, latch, handle and trim.
Is this a genuine Porsche part or an aftermarket reproduction?
It is an aftermarket reproduction manufactured by JP Group of Denmark, built to match the factory panel's fit and profile — it is not a genuine Porsche OEM part.
What is the part number?
JP Group JP-1886-0, JP reference 1680700570.
Explore Related Categories
More for your build: Body Panels, Porsche 911, All Porsche
Porsche® and model designations are trademarks of Dr. Ing. h.c. F. Porsche AG. Washburn's Metal is not affiliated with or endorsed by Porsche. Part numbers are for reference only.
⚠ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
