EMPI 2.0mm Needle Valve & Seat - EPC 38E & 38 DGS | Porsche 914 1970-1976 (43-5369-0)
Couldn't load pickup availability
- Vendor EMPI
- SKU 43-5369-0
- Barcode 707924236446
-
Fits
- 1970-1976 Porsche 914
Not sure it fits? Call the shop: (657) 438-7002.
EMPI 2.0mm Needle Valve & Seat for EPC 38E & 38 DGS Carburetors (43-5369-0)
Short answer: The EMPI 43-5369-0 is a genuine EMPI 2.0mm needle valve and seat assembly for EMPI/EPC 38E and 38 DGS carburetors. It regulates fuel flow into the float bowl to hold a steady fuel level. It fits those carbs on the 1970-1976 Porsche 914 and air-cooled VWs, and is sold individually.
Part numbers: EMPI 43-5369-0 / 4353690 · UPC 707924236446
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 1970-1976 | Porsche 914 | With an EMPI/EPC 38E or 38 DGS carburetor |
| Not listed | VW Beetle, Karmann Ghia, Type 3, Bus | With an EMPI/EPC 38E or 38 DGS carburetor |
| Not confirmed | Other carburetor models | Contact us with your year and model before ordering |
Specifications
| Specification | Detail |
|---|---|
| Part number | EMPI 43-5369-0 |
| Part type | Needle valve and seat assembly |
| Size | 2.0mm |
| Carburetors | EMPI/EPC 38E and 38 DGS |
| Quantity | Sold individually (one needle valve and seat) |
| Boxed dimensions | 1 x 1 x 2 in |
| Shipping weight | 0.1 lb |
| UPC | 707924236446 |
| Manufacturer | EMPI |
Why It Matters
A 38E or 38 DGS that floods over or drains its bowl dry under load has lost the seal at the inlet. The needle valve and seat set the float-bowl fuel level, so delivery stays steady as the throttle opens.
Installation Notes
- Direct-fit replacement for a worn or mismatched valve.
Frequently Asked Questions
What does a needle valve and seat do in a 38 DGS carburetor? The needle valve and seat control fuel entering the float bowl and set your fuel level. This 2.0mm assembly sizes the inlet for the 38E and 38 DGS.
Does the 43-5369-0 fit a Porsche 914? Yes. It fits EMPI 38E and 38 DGS carburetors, including those on the 1970-1976 Porsche 914.
Why is my 38E carburetor flooding? A carburetor that floods over or drains its bowl dry under load has often lost the seal at the inlet. A worn or mismatched needle valve and seat is a common cause.
Is it sold individually? Yes. One needle valve and seat per order.
What is the part number and UPC? EMPI 43-5369-0, UPC 707924236446.
⚠ California Proposition 65 Warning: This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
The Tech Bench Everything we know about doing the work, in one place — written and filmed on our own bench in Orange, California, with the same parts we sell you.
Pick a bench below. Written install guides, free decoder tools, install videos, and the fitment lookup — each one lives on its own page so you're not scrolling past nine systems to find the one you're working on.
Four benches
Pick the one that matches the job in front of youInstall Guides
The full written library — procedures, torque specs, and the order of operations that keeps you from taking something apart twice. Organised by system.
55 guides8 systems5 published Open the library 02Decoders & Lookup
Chassis number, Beetle M-code, Bus M-code. Free tools for pinning down exactly what you have before you spend money on a part that doesn't fit it.
Chassis No.M-PlateFree Open the decoders 03Watch & Learn
Install videos and build footage from the shop floor. Watch the part go in — then grab the kit from the same page.
InstallsBuildsYouTube Watch the videos 04Fitment Lookup
Year and model in, the parts that actually fit out. The fastest way from "I think it's a '67" to the right part number in your cart.
Year / ModelAll parts Open the lookupLatest from the bench
5Most recently publishedGear Ratio Calculator
Type 1 and Bus transaxles. Ring and pinion, gear ratios, tire height and shift rpm in — road speed, rpm drop on every shift, and cruise rpm out.
Type 1 · BusOpen the calculator CH01 Guide 01 Best sellerSnap-Lock Delrin Shift Bushing
The 20-minute fix that turns a sloppy shifter crisp — and the whole shift-linkage explained.
#CH01Read the guide BY01 Guide 27Big Washburn Windows
Large engine-bay access panels for dual-carb and big-engine builds — reach the carbs without pulling the motor.
#BY01Read the guide PMO ReferencePMO Carburetors: Triple-Throat Induction
The complete reference on PMO triple-throat carburetors for air-cooled Porsche — sizing, jetting, and setup.
PMORead the guide CH64 ChassisFlat Out Custom Shortened Pan Halves
Building a shortened dune buggy or kit car? Engineered pan halves put a straight floor under it without sectioning a stock VW pan.
#CH64Read the guideFrom the shop blog
3Shorter reads from the shop floorBig Washburn Carb Windows: What They Are and Why We Cut Them
The reasoning behind cutting the rear inner fenders open, before you read the full install guide.
Read the post BlogTunnel Access Plates: Why We Cut a Hole in Your Pan on Purpose
Why the center tunnel gets an access plate, and what it saves you the next time the linkage needs attention.
Read the post BlogSome Hot VWs That Came Through the Shop This Spring
A look at the cars on the lifts in Orange, California, and the work that went into them.
Read the postCan't find your job here?
Call the shop. If the guide isn't written yet, we'll walk you through it on the phone — fitment, torque, sequence, what to buy and what to skip.
(657) 438-7002Shop line — parts, fitment and technical questions. Orange, California.
Free shipping on domestic (U.S.) orders over $250 — no code needed; oversize and freight items are excluded and ship at carrier rates. Otherwise, domestic shipping is calculated at checkout based on the size, weight, and destination of your order.
Orders are typically processed within 24–48 hours before they ship. Once your order ships, you'll get an email with tracking information.
Shipping outside the U.S.? Contact us at (657) 438-7002 before you order and we'll confirm rates and options for your destination.