EMPI 32mm Main Venturi — D Series Carburetor Airflow | Porsche 914 1970-1976 (44-1107-0)
Couldn't load pickup availability
EMPI 32mm Main Venturi (44-1107-0) for EMPI D Series Carburetors
The EMPI 44-1107-0 is a genuine 32mm main venturi for EMPI D Series (EPC) carburetors, including those on the 1970-1976 Porsche 914 and air-cooled VW engines. The 32mm bore raises airflow for larger-displacement builds and pairs with taller cams and bigger bores. It drops into the venturi bore without machining and is sold each, so you can match left and right sizes.
Part numbers: EMPI 44-1107-0 / 4411070 / 44 1107 0 · 32mm D Series main venturi
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 1970–1976 | Porsche 914 | With EMPI D Series (EPC) carburetors |
| — | Air-cooled VW | Engines running EMPI D Series (EPC) carburetors |
If you are unsure this fits your car, contact us with your year and model before ordering.
Specifications
| Spec | Detail |
|---|---|
| Part number | 44-1107-0 |
| Manufacturer | EMPI |
| Venturi size | 32mm main venturi |
| Carburetors | EMPI D Series (EPC) |
| Fit | Drops into the venturi bore; no machining required |
| Sold as | Each |
| Ships from | Orange, California |
Why It Matters
Displacement is an appetite, and a larger engine asks the carburetor for more air through the mid and top. The 32mm venturi steps up flow through an EMPI D Series carburetor to feed bigger motors as the tach climbs.
Installation Notes
The venturi drops into the venturi bore of an EMPI D Series carburetor with no machining required. It is sold each, so order one per barrel to keep both barrels matched.
Frequently Asked Questions
What carburetor does the EMPI 32mm venturi 44-1107-0 fit?
The EMPI 44-1107-0 32mm main venturi fits EMPI D Series (EPC) carburetors, including those on the 1970-1976 Porsche 914 and air-cooled VW engines.
Does the EMPI 44-1107-0 fit a Porsche 914?
Yes. It fits the 1970-1976 Porsche 914 when it runs EMPI D Series (EPC) carburetors.
When should I use a 32mm D Series venturi?
The 32mm bore raises airflow for larger-displacement builds and pairs with taller cams and bigger bores.
Do I need to machine the carburetor to fit it?
No. The venturi drops into the venturi bore of the D Series carburetor without machining.
Is the D Series venturi sold as a pair?
No. It is sold each, so you can match left and right sizes on a dual-carb setup.
Explore Related Categories
Browse more from Washburn's Metal: Fuel & Intake Porsche 914 EMPI
⚠ California Proposition 65 Warning: This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
