EMPI Sprintstar Wheel — 15 x 8 in Gloss Black w/ Polished Spokes & Lip (4x130mm)

Part Number: 00-2322-0 | Sold Each. Stagger your stance. The classic 8-spoke Sprintstar, a long-time Cal-Look favorite, in an 8-inch-wide version for builders chasing real width and presence. Run a pair on the rear with narrower Sprintstars up front for the ultimate Cal-Look big-and-little setup, or go full-on aggressive with four corners.

Vehicle Fitment

• VW Beetle (sedan & convertible): 1968–1979; Super Beetle: 1971–1979 — fender modification required
• Karmann Ghia: 1967–1974 — fender modification required
• Type 3: 1966–1973 — fender modification required
• Also: Sand rails, Manx-style buggies, custom builds

Why Choose EMPI?

The Sprintstar is an air-cooled icon, and this 15 x 8 in production version was built for serious width. All-aluminum construction with a gloss black face and polished spokes and lip delivers Cal-Look presence at the corners.

Key Features & Benefits

• Aggressive 15 x 8 in width: Ideal for a staggered big-and-little setup.
• Gloss black face, polished spokes and lip: Two-tone Cal-Look finish.
• All-aluminum construction: Lightweight and strong.
• What's included: Center cap, chrome valve stem and installation instructions. Lug bolts sold separately — see the 60° lug kit.

Technical Specifications

• Part Number: 00-2322-0
• Size: 15 x 8 in
• Bolt Pattern: 4x130mm (air-cooled VW 4-lug)
• Offset (ET): -18mm (negative)
• Backspacing: 3-3/4 in
• Lug Seat: 60° conical taper
• Construction: All-aluminum
• Finish: Gloss black face, polished spokes and lip
• Sold As: Each

EMPI does not publish a center bore figure for the 15 x 8 in Sprintstar — measure your hub and test-fit before mounting tires.

Frequently Asked Questions

• Does this wheel include lug bolts? No — lug bolts are sold separately. This wheel needs 60° conical-seat M14x1.5 lug bolts, 4 per wheel (16 for a full set) — see the 60° lug kit.
• Will it fit my stock fenders? No — it is 8 inches wide with a -18mm (negative) offset and will protrude outside stock fenders on most applications. Plan for fender flares or a build designed for this width, and always test-fit before mounting tires.
• Is this sold each or as a set? Sold each.

Installation

This is an 8-inch-wide wheel with a -18mm (negative) offset. It will protrude well outside stock fenders on most applications. Plan for fender flares, IRS conversion, narrowed beam (front), or a build designed for this width before purchase. Always test-fit before mounting tires.

• Lug bolts sold separately — see the 60° lug kit (4 per wheel, 16 for a full set).
• Brake clearance: Verify brake caliper clearance before mounting.
• Once tires are mounted, the wheel cannot be returned.

Explore Related Categories

Shop related parts: Wheels, All VW Air-Cooled, Dune Buggy.

California Prop 65 Warning: This product can expose you to chemicals known to the State of California to cause cancer and reproductive harm. For more information, visit www.P65Warnings.ca.gov. All parts legal for use on pre-pollution controlled vehicles only.

Fitment & Hardware

• Bolt pattern: 4x130 (VW 4-lug) — see all 4x130 wheels
• Lug hardware: M14x1.5 lug bolts with a 60° cone (taper) seat, 4 per wheel, 16 per car — EMPI 60° chrome lug bolt kit, set of 16 (4× 00-9712-0).
• Center cap: EMPI Sprintstar, 914 & Riviera center cap (00-9707-0)
• Buy as a set of 4: EMPI Sprintstar wheel set of 4, 4x130
• Not sure it fits? See the VW wheel fitment guide or call (657) 438-7002, weekdays 8–5 Pacific.
• Compare all 15 styles in The Wheel Book